Automatic air conditioning system (vehicles with 12.3-inch display)

Air outlets and fan speed are automatically adjusted according to the temperature setting.

The air conditioning system can be operated using the air conditioning control panel and air conditioning control screen on the Toyota multi-operation touch.

For details about Toyota multi-operation touch, refer to Toyota multi-operation touch (vehicle with the 12.3-inch display).

Air conditioning controls

Left-hand side temperature control switches

Fan speed increase switch

Airflow mode control switch

Fan speed decrease switch

“ Option” switch

Right-hand side temperature control switches

Outside/recirculated air mode switch

Eco air conditioning mode switch

“ SYNC” switch

“ A/C” switch

Automatic mode switch

Windshield defogger switch

Rear window and outside rear view mirror defoggers switch

“ OFF” switch

Adjusting the temperature setting

Press of the temperature control switches on the air conditioning control panel or select of the temperature control switches on the air conditioning control screen to increases the temperature.

Press of the temperature control switches on the air conditioning control panel or select of the temperature control switches on the air conditioning control screen to decreases the temperature.

If the switch is pressed and held or selected and held, the temperature will continuously change.

If the indicator on the “ A/C” switch does not illuminate, the system will blow ambient temperature air or heated air.

Setting the fan speed

Press the fan speed increase switch on the air conditioning control panel or select the fan speed increase switch on the air conditioning control screen to increase the fan speed.

Press the fan speed decrease switch on the air conditioning control panel or select the fan speed decrease switch on the air conditioning control screen to decrease the fan speed.

Press the “ OFF” switch on the air conditioning control panel to turn the fan off.

Change the airflow mode

Select the airflow mode control switch on the air conditioning control screen.

The airflow mode changes each time the switch is selected.

: Air flows to the upper body

: Air flows to the upper body and feet

: Air flows to the feet

: Air flows to the feet and the windshield defogger operates

Switching between outside air and recirculated air modes

Select the outside/recirculated air mode switch on the air conditioning control screen.

The mode switches between outside air mode and recirculated air mode each time the switch is selected.

When recirculated air mode is selected, the indicator illuminates on the outside/recirculated air mode switch.

Set cooling and dehumidification function

Select the “A/C” switch on the air conditioning control screen.

When the function is on, the indicator illuminates on the “ A/C” switch.

Automatic air conditioning system Eco air conditioning mode

Air conditioning system Eco air conditioning mode

A/C Eco air conditioning mode Eco air conditioning mode

The air conditioning is controlled with low fuel consumption prioritized such as reducing fan speed, etc.

Select the eco air conditioning mode switch on the air conditioning control screen.

When the eco air conditioning mode is on, the indicator illuminates on the eco air conditioning mode switch.

Windshield defogger

Switches Windshield defogger switch

Defogger Windshield Defogging the windshield

Defoggers are used to defog the windshield and front side windows.

Press the windshield defogger switch on the air conditioning control panel.

Set the outside/recirculated air mode switch to outside air mode if the recirculated air mode is used. (It may switch automatically.)

To defog the windshield and the side windows quickly, turn the air flow and temperature up.

To return to the previous mode, press the windshield defogger switch again when the windshield is defogged.

When the windshield defogger switch is on, the indicator illuminates on the windshield defogger switch.

Windows Rear window defogger

Switches Rear window and outside rear view mirror defoggers switch

Side mirrors Heaters

Rear window defogger

Outside rear view mirrors Outside rear view mirror defoggers

Mirrors Outside rear view mirror defoggers

Heaters Outside rear view mirrors

Defogger Outside rear view mirrors

Defogger Rear window Defogging the rear window and outside rear view mirrors

Defoggers are used to defog the rear window and to remove raindrops, dew and frost from the outside rear view mirrors.

Press the rear window and outside rear view mirror defoggers switch on the air conditioning control panel.

The defoggers will automatically turn off after 15 minutes.

When the rear window and outside rear view mirror defoggers switch is on, the indicator illuminates on the rear window and outside rear view mirror defoggers switch.

Option control screen

Select the “ Option” switch to display the option control screen.

The functions can be switched on and off.

When the function is on, the indicator illuminates on the screen.

Front seat concentrated airflow mode (S-FLOW) (Front seat concentrated airflow mode (S-FLOW))

Select to display the previous screen.

Note:

When the outside temperature exceeds 75°F (24°C) and the air conditioning system is on

In order to reduce the air conditioning power consumption, the air conditioning system may switch to recirculated air mode automatically.This may also reduce fuel consumption.

Recirculated air mode is selected as a default mode when the power switch is turned to ON.

It is possible to switch to outside air mode at any time by selecting the outside/recirculated air mode switch.

Fogging up of the windows

The windows will easily fog up when the humidity in the vehicle is high. Turning the cooling and dehumidification function on will dehumidify the air from the outlets and defog the windshield effectively.

If you turn the cooling and dehumidification function off, the windows may fog up more easily.

The windows may fog up if the recirculated air mode is used.

When driving on dusty roads

Close all windows. If dust thrown up by the vehicle is still drawn into the vehicle after closing the windows, it is recommended that the air intake mode be set to outside air mode and the fan speed to any setting except off.

Outside/recirculated air mode

Setting to the recirculated air mode temporarily is recommended in preventing dirty air from entering the vehicle interior and helping to cool the vehicle when the outside air temperature is high.

Outside/recirculated air mode may automatically switch depending on the temperature setting or the inside temperature.

When the outside temperature falls to nearly 32°F (0°C)

The dehumidification function may not operate even when “ A/C” switch is selected.

Operation of the air conditioning system in Eco drive mode

In Eco drive mode, the air conditioning system is controlled as follows to prioritize fuel efficiency:

Engine speed and compressor operation controlled to restrict heating/cooling capacity

Fan speed restricted when automatic mode is selected

To improve air conditioning performance, perform the following operations:

Adjust the fan speed

Turn off Eco drive mode (Driving mode select switch)

Turn off Eco air conditioning mode

When the driving mode is set to Eco drive mode, the Eco air conditioning mode will be turned on automatically. Even in this case, the Eco air conditioning mode can be turned off by selecting the Eco air conditioning mode switch.

Notes on touch switch operation

Operate using a finger (the pad of the finger).

If a coating, film, etc. is applied to the surface of the air conditioning control panel, non-response may occur.

If a pen, etc. is used to operate the system, the system will not respond.

When performing a touch operation, make sure that other fingers, etc. do not touch the air conditioning control panel.

When performing a series of touch operations, withdraw the finger completely before performing the next operation.

Do not forcefully press the air conditioning control panel.

If the air conditioning control panel is dirty or has liquid attached to it, incorrect operation may occur. Wipe the control panel clean before performing any touch operations.

Situations when non-response may occur from normal touch switch operation

Gloves, etc. are worn.

A coating, film, etc. is applied to the surface of the air conditioning control panel.

The air conditioning control panel is dirty or has liquid attached to it.

The vehicle is in an area where strong electrical waves or noise are emitted, such as near a television tower, power plant, gasoline station, broadcasting station, large display, airport, etc.

Wireless devices such as radios, cell phones, etc. are carried.

The air conditioning control panel is in contact with, or covered by, a metallic object such as the following:

A card that has metal on it, such as aluminum foil, etc.

A pack of cigarettes that use aluminum foil

A wallet or bag that is made of metal

Coins

A heating pad

CDs, DVDs or other media

If your hand is near or touching the air conditioning control panel when the power switch is turned to ACC or ON, non-response may occur. If so, withdraw your hand from the air conditioning control panel and wait approximately 10 seconds before touching the air conditioning control panel again.

When non-response from touch switch operation

When the air conditioning control panel is dirty, non-response may occur.

Clean the touch panel frequently.

When cleaning the air conditioning control panel

Touch switches may respond when cleaning. Turn the power switch to OFF before proceeding with cleaning.

Ventilation and air conditioning odors

To let fresh air in, set the air conditioning system to the outside air mode.

During use, various odors from inside and outside the vehicle may enter into and accumulate in the air conditioning system. This may then cause odor to be emitted from the vents.

In order to suppress odors that occur when the air conditioning system starts, the air flow mode may change to blow air to the feet or air may stop blowing for a short period of time immediately after the air conditioning system is started in automatic mode.

When parking, the system automatically switches to outside air mode to encourage better air circulation throughout the vehicle, helping to reduce odors that occur when starting the vehicle.

Air conditioning filter

Air conditioning system refrigerant

A label regarding the refrigerant of the air conditioning system is attached to the hood at the location shown in the following illustration.

The meaning of each symbol on the label are as follows:


	Caution
	Air conditioning system
	Air conditioning system lubricant type
	Requires registered technician to service air conditioning system
	Flammable refrigerant

Changing the air conditioning control panel touch switch response

The amount of time takes for a switch to respond can be changed through the following operations:

The air conditioning system cannot be operated while these operations are performed.

Press and hold both the fan speed decrease switch and automatic mode switch on the air conditioning control panel at the same time for approximately 3 seconds.

The indicators on the rear window and outside rear view mirror defoggers switch, windshield defogger switch and automatic mode switch will blink. The blinking indicators depend on the current setting.

Press the rear window and outside rear view mirror defoggers switch on the air conditioning control panel.

Each time the switch is pressed, the response time changes. The statuses of the indicators on the rear window and outside rear view mirror defoggers switch, windshield defogger switch and automatic mode switch inform the current setting.


Response time
1	Not illuminated	Not illuminated	Blinks
2	Not illuminated	Blinks	Not illuminated
3	Not illuminated	Blinks	Blinks
4	Blinks	Not illuminated	Not illuminated
5	Blinks	Not illuminated	Blinks

Indicator on the rear window and outside rear view mirror defoggers switch

Indicator on the windshield defogger switch

Indicator on the automatic mode switch

The smaller the number the quicker the response time becomes, and the larger the number the slower the response time becomes.

If touch operations are not performed for approximately 5 seconds with the desired setting, the setting change completes.

After the setting change completes, all indicators will illuminate for a short time. Do not turn the power switch to OFF during this time. Setting contents will be erased.

Turning the air conditioning control panel touch switch operation sounds on or off

Operation sounds produced when a switch is touched can be turned on or off through the following operations:

The air conditioning system cannot be operated while these operations are performed.

Press and hold both the fan speed increase switch and “ OFF” switch on the air conditioning control panel at the same time for approximately 3 seconds.

The indicators on the windshield defogger switch and automatic mode switch will blink. The blinking indicators depend on the current setting.

Press the rear window and outside rear view mirror defoggers switch on the air conditioning control panel.

Each time the switch is pressed, the operation sounds switches between on and off. The statuses of the indicators on the windshield defogger switch and automatic mode switch inform the current setting.


Operation sounds
On	Blinks	Not illuminated
Off	Not illuminated	Blinks

Indicator on the windshield defogger switch

Indicator on the automatic mode switch

If touch operations are not performed for approximately 5 seconds with the desired setting, the setting change completes.

After the setting change completes, all indicators will illuminate for a short time. Do not turn the power switch to OFF during this time. Setting contents will be erased.

Customization

Some functions can be customized.(Customizable features: Automatic air conditioning system (, ))

Warning:

To prevent the windshield from fogging up

Do not use the windshield defogger switch during cool air operation in extremely humid weather.The difference between the temperature of the outside air and that of the windshield can cause the outer surface of the windshield to fog up, blocking your vision.

When the outside rear view mirror defoggers are operating

Do not touch the rear view mirror surfaces when the outside rear view mirror defoggers are on.

Notice:

To prevent 12-volt battery discharge

Do not leave the air conditioning system on longer than necessary when the hybrid system is off.

Windshield wiper de-icerUsing automatic mode

Press the “ AUTO” switch on the air conditioning control panel.

Adjust the temperature setting.

To stop the operation, press the “ OFF” switch on the air conditioning control panel.

If the fan speed setting or air flow modes are operated, the automatic mode indicator goes off. However, automatic mode for functions other than that operated is maintained.

Note:

Using automatic mode

Fan speed is adjusted automatically according to the temperature setting and the ambient conditions.

Therefore, the fan may stop for a while until warm or cool air is ready to flow immediately after the automatic mode switch is pressed.

Adjusting the temperature for driver and passenger seats simultaneously (“ SYNC” mode)

To turn on the “ SYNC” mode, select the “ SYNC” switch on the air conditioning control screen.

The driver’s side temperature control switches can be used to adjust the temperature for the driver’s and passenger’s side. To enter individual mode, operate the passenger’s side temperature control switches or select the “ SYNC” switch again.

When the “ SYNC” mode is on, the indicator illuminates on the “ SYNC” switch.

Air conditioning system Front seat concentrated airflow mode (S-FLOW)

A/C Front seat concentrated airflow mode (S-FLOW) Front seat concentrated airflow mode (S-FLOW)

This function automatically controls the air conditioning airflow so that priority is given to the front seat. When the front passenger seat is not occupied, airflow may switch to only the driver’s seat. Unnecessary air conditioning is suppressed, contributing to increased fuel efficiency.

Front seat concentrated airflow mode operates in the following situations.

No passengers are detected in the rear seats

The windshield defogger is not operating

While operating, illuminates.

Manually turning front seat concentrated airflow mode on/off

In front seat concentrated airflow mode, directing airflow to the front seats only and to the all seats can be switched via switch operation. When the mode has been switched manually, automatic airflow control stops operating.

Select on the option control screen of the air conditioning control screen and switch the airflow.

Indicator illuminated: Airflow to the front seats only

Indicator off: Airflow to the all seats

Note:

Operation of automatic airflow control

In order to maintain a comfortable interior, airflow may be directed to seats without passengers immediately after the hybrid system is started and at other times depending on the outside temperature.

After the hybrid system is started, if passengers move around inside or enter/exit the vehicle, the system cannot accurately detect the presence of passengers and automatic airflow control will not operate.

Operation of manual airflow control

Even if the function is manually switched to directing airflow to only the front seats, when a rear seat is occupied, it may automatically direct airflow to all seats.

To return to automatic airflow control

With the indicator off, turn the power switch to OFF.

After 60 minutes or more elapse, turn the power switch to ON.

Switches Windshield wiper de-icer switch Windshield wiper de-icer (if equipped)

This feature is used to prevent ice from building up on the windshield and wiper blades.

Press the switch to turn the system on/off.

The indicator comes on when the system is on.

The windshield wiper de-icer will automatically turn off after approximately 15 minutes.

Warning:

To prevent burns

Do not touch the glass at lower part of the windshield or to the side of the front pillars when the windshield wiper deicer is on.

Air outlet layout and operations

Location of air outlets

The air outlets and air volume change according to the selected air flow mode.

Adjusting the air flow direction and opening/closing the air outlets

Front

Direct air flow to the left or right, up or down

Open the vent

Close the vent

Rear

Direct air flow to the left or right, up or down

Open the vent

Close the vent

Warning:

To not interrupt the windshield defogger from operating

Do not place anything on the instrument panel which may cover the air outlets. Otherwise, air flow may be obstructed, preventing the windshield defoggers from defogging.