Automatic air conditioning system (vehicles with 8-inch display) Air outlets and fan speed are automatically adjusted according to the temperature setting. Air conditioning controls Automatic mode switch Left-hand side temperature control knob Right-hand side temperature control knob “ SYNC” switch “ A/C” switch Front seat concentrated airflow mode (S-FLOW) switch Outside/recirculated air mode switch Airflow mode control switch Fan speed increase switch Fan speed decrease switch Eco air conditioning mode switch Rear window and outside rear view mirror defoggers switch Windshield defogger switch “ OFF” switch Adjusting the temperature setting Turn the temperature control dial clockwise to increases the temperature and counterclockwise to decreases the temperature. If the “ A/C” switch is not pressed, the system will blow ambient temperature air or heated air. Setting the fan speed Press the fan speed increase switch to increase the fan speed and the fan speed decrease switch to decrease the fan speed. Press the “ OFF” switch to turn the fan off. Change the airflow mode Press the airflow mode control switch. The airflow mode changes as follows each time the switch is pressed. Air flows to the upper body. Air flows to the upper body and feet. Air flows to the feet. Air flows to the feet and the windshield defogger operates. Switching between outside air and recirculated air modes Press the outside/recirculated air mode switch. The mode switches between outside air mode and recirculated air mode each time the switch is operated. When recirculated air mode is selected, the indicator illuminates on the outside/recirculated air mode switch. Set cooling and dehumidification function Press the “ A/C” switch. When the function is on, the indicator illuminates on the “ A/C” switch. Automatic air conditioning system Eco air conditioning mode Air conditioning system Eco air conditioning mode A/C Eco air conditioning mode Eco air conditioning mode The air conditioning is controlled with low fuel consumption prioritized such as reducing fan speed, etc. Press the eco air conditioning mode switch. When the eco air conditioning mode is on, the indicator illuminates on the eco air conditioning mode switch. Windshield defogger Switches Windshield defogger switch Defogger Windshield Defogging the windshield Defoggers are used to defog the windshield and front side windows. Press the windshield defogger switch. Set the outside/recirculated air mode switch to outside air mode if the recirculated air mode is used. (It may switch automatically.) To defog the windshield and the side windows quickly, turn the air flow and temperature up. To return to the previous mode, press the windshield defogger switch again when the windshield is defogged. When the windshield defogger switch is on, the indicator illuminates on the windshield defogger switch. Windows Rear window defogger Switches Rear window and outside rear view mirror defoggers switch Side mirrors Heaters Rear window defogger Outside rear view mirrors Outside rear view mirror defoggers Mirrors Outside rear view mirror defoggers Heaters Outside rear view mirrors Defogger Outside rear view mirrors Defogger Rear window Defogging the rear window and outside rear view mirrors Defoggers are used to defog the rear window and to remove raindrops, dew and frost from the outside rear view mirrors. Press the rear window and outside rear view mirror defoggers switch. The defoggers will automatically turn off after 15 minutes. When the rear window and outside rear view mirror defoggers switch is on, the indicator illuminates on the rear window and outside rear view mirror defoggers switch. Note: When the outside temperature exceeds 75°F (24°C) and the air conditioning system is on In order to reduce the air conditioning power consumption, the air conditioning system may switch to recirculated air mode automatically.This may also reduce fuel consumption. Recirculated air mode is selected as a default mode when the power switch is turned to ON. It is possible to switch to outside air mode at any time by pressing the outside/recirculated air mode switch. Fogging up of the windows The windows will easily fog up when the humidity in the vehicle is high. Turning the cooling and dehumidification function on will dehumidify the air from the outlets and defog the windshield effectively. If you turn the cooling and dehumidification function off, the windows may fog up more easily. The windows may fog up if the recirculated air mode is used. When driving on dusty roads Close all windows. If dust thrown up by the vehicle is still drawn into the vehicle after closing the windows, it is recommended that the air intake mode be set to outside air mode and the fan speed to any setting except off. Outside/recirculated air mode Setting to the recirculated air mode temporarily is recommended in preventing dirty air from entering the vehicle interior and helping to cool the vehicle when the outside air temperature is high. Outside/recirculated air mode may automatically switch depending on the temperature setting or the inside temperature. When the outside temperature falls to nearly 32°F (0°C) The dehumidification function may not operate even when “ A/C” switch is pressed. Operation of the air conditioning system in Eco drive mode In Eco drive mode, the air conditioning system is controlled as follows to prioritize fuel efficiency: Engine speed and compressor operation controlled to restrict heating/cooling capacity Fan speed restricted when automatic mode is selected To improve air conditioning performance, perform the following operations: Adjust the fan speed Turn off Eco drive mode (Driving mode select switch) Turn off Eco air conditioning mode When the driving mode is set to Eco drive mode, the Eco air conditioning mode will be turned on automatically. Even in this case, the Eco air conditioning mode can be turned off by pressing the Eco air conditioning mode switch. Ventilation and air conditioning odors To let fresh air in, set the air conditioning system to the outside air mode. During use, various odors from inside and outside the vehicle may enter into and accumulate in the air conditioning system. This may then cause odor to be emitted from the vents. In order to suppress odors that occur when the air conditioning system starts, the air flow mode may change to blow air to the feet or air may stop blowing for a short period of time immediately after the air conditioning system is started in automatic mode. When parking, the system automatically switches to outside air mode to encourage better air circulation throughout the vehicle, helping to reduce odors that occur when starting the vehicle. Air conditioning filter Air conditioning filter Air conditioning system refrigerant A label regarding the refrigerant of the air conditioning system is attached to the hood at the location shown in the following illustration. The meaning of each symbol on the label are as follows:
Caution
Air conditioning system
Air conditioning system lubricant type
Requires registered technician to service air conditioning system
Flammable refrigerant
Customization Some functions can be customized.(Customizable features: Automatic air conditioning system (, )) Warning: To prevent the windshield from fogging up Do not use the windshield defogger switch during cool air operation in extremely humid weather.The difference between the temperature of the outside air and that of the windshield can cause the outer surface of the windshield to fog up, blocking your vision. When the outside rear view mirror defoggers are operating Do not touch the rear view mirror surfaces when the outside rear view mirror defoggers are on. Notice: To prevent 12-volt battery discharge Do not leave the air conditioning system on longer than necessary when the hybrid system is off. When repairing/replacing parts of the air conditioning system Have repair/replacement performed by your Toyota dealer. When a part of the air conditioning system, such as the evaporator, is to be replaced, it must be replaced with a new one. Windshield wiper de-icerUsing automatic mode Press the “ AUTO” switch. Adjust the temperature setting. To stop the operation, press the “ OFF” switch. If the fan speed setting or air flow modes are operated, the automatic mode indicator goes off. However, automatic mode for functions other than that operated is maintained. Note: Using automatic mode Fan speed is adjusted automatically according to the temperature setting and the ambient conditions. Therefore, the fan may stop for a while until warm or cool air is ready to flow immediately after the automatic mode switch is pressed. Adjusting the temperature for driver and passenger seats simultaneously (“ SYNC” mode) To turn on the “ SYNC” mode, press the “ SYNC” switch. The driver’s side temperature control dial can be used to adjust the temperature for the driver’s and passenger’s side. To enter individual mode, operate the passenger’s side temperature control dial or press the “ SYNC” switch again. When the “ SYNC” mode is on, the indicator illuminates on the “ SYNC” switch. Air conditioning system Front seat concentrated airflow mode (S-FLOW) A/C Front seat concentrated airflow mode (S-FLOW) Front seat concentrated airflow mode (S-FLOW) This function automatically controls the air conditioning airflow so that priority is given to the front seat. When the front passenger seat is not occupied, airflow may switch to only the driver’s seat. Unnecessary air conditioning is suppressed, contributing to increased fuel efficiency. Front seat concentrated airflow mode operates in the following situations. No passengers are detected in the rear seats The windshield defogger is not operating While operating, illuminates. Manually turning front seat concentrated airflow mode on/off In front seat concentrated airflow mode, directing airflow to the front seats only and to the all seats can be switched via switch operation. When the mode has been switched manually, automatic airflow control stops operating. Press on the air conditioning operation panel and switch the airflow. Indicator illuminated: Airflow to the front seats only Indicator off: Airflow to the all seats Note: Operation of automatic airflow control In order to maintain a comfortable interior, airflow may be directed to seats without passengers immediately after the hybrid system is started and at other times depending on the outside temperature. After the hybrid system is started, if passengers move around inside or enter/exit the vehicle, the system cannot accurately detect the presence of passengers and automatic airflow control will not operate. Operation of manual airflow control Even if the function is manually switched to directing airflow to only the front seats, when a rear seat is occupied, it may automatically direct airflow to all seats. To return to automatic airflow control With the indicator off, turn the power switch to OFF. After 60 minutes or more elapse, turn the power switch to ON. Switches Windshield wiper de-icer switch Windshield wiper de-icer (if equipped) This feature is used to prevent ice from building up on the windshield and wiper blades. Press the switch to turn the system on/off. The indicator comes on when the system is on. The windshield wiper de-icer will automatically turn off after approximately 15 minutes. Warning: To prevent burns Do not touch the glass at lower part of the windshield or to the side of the front pillars when the windshield wiper deicer is on. Air outlet layout and operations Location of air outlets The air outlets and air volume change according to the selected air flow mode. Adjusting the air flow direction and opening/closing the air outlets Front Direct air flow to the left or right, up or down Open the vent Close the vent Rear Direct air flow to the left or right, up or down Open the vent Close the vent Warning: To not interrupt the windshield defogger from operating Do not place anything on the instrument panel which may cover the air outlets. Otherwise, air flow may be obstructed, preventing the windshield defoggers from defogging.