Driving assist systems To keep driving safety and performance, the following systems operate automatically in response to various driving situations. Be aware, however, that these systems are supplementary and should not be relied upon too heavily when operating the vehicle. Summary of the driving assist systems ECB (Electronically Controlled Brake System) The electronically controlled system generates braking force corresponding to the brake operation Anti-lock brake system (ABS) Function Anti-lock brake system (ABS) ABS (Anti-lock Brake System) Function ABS (Anti-lock Brake System)ABS (Anti-lock Brake System) Helps to prevent wheel lock when the brakes are applied suddenly, or if the brakes are applied while driving on a slippery road surface Brake assistBrake assist Generates an increased level of braking force after the brake pedal is depressed when the system detects a panic stop situation VSC (Vehicle Stability Control) Vehicle Stability Control (VSC)VSC (Vehicle Stability Control) Helps the driver to control skidding when swerving suddenly or turning on slippery road surfaces. Enhanced VSC (Enhanced Vehicle Stability Control) Enhanced Vehicle Stability Control (Enhanced VSC)Enhanced VSC (Enhanced Vehicle Stability Control) Provides cooperative control of the ABS, TRAC, VSC and EPS. Helps to maintain directional stability when swerving on slippery road surfaces by controlling steering performance. Traction Control (TRAC) TRAC (Traction Control)TRAC (Traction Control) Helps to maintain drive power and prevent the drive wheels from spinning when starting the vehicle or accelerating on slippery roads Active Cornering Assist (ACA) ACA (Active Cornering Assist)Active Cornering Assist (ACA) Helps to prevent the vehicle from drifting to the outer side by performing inner wheel brake control when attempting to accelerate while turning Hill-start assist controlHill-start assist control Helps to reduce the backward movement of the vehicle when starting on an uphill Power steering (Electric Power Steering system) EPS (Electric Power Steering) Function Electric Power Steering (EPS) Function EPS (Electric Power Steering) Employs an electric motor to reduce the amount of effort needed to turn the steering wheel E-Four (Electronic On-Demand AWD system)E-Four (Electronic On-Demand AWD system) Automatically switches from front wheel drive to all-wheel drive (AWD) according to the driving conditions, helping to ensure reliable handling and stability. Examples of conditions where the system will switch to AWD are when cornering, going uphill, starting off or accelerating, and when the road surface is slippery due to snow, rain, etc. Secondary Collision BrakeThe Secondary Collision Brake When the SRS airbag sensor detects a collision and the system operates, the brakes and brake lights are automatically controlled to reduce the vehicle speed and help reduce the possibility of further damage due to a secondary collision. Note: When the TRAC/VSC/ABS systems are operating The slip indicator light will flash while the TRAC/VSC/ABS systems are operating. Switches VSC OFF switch Disabling the TRAC system If the vehicle gets stuck in mud, dirt or snow, the TRAC system may reduce power from the hybrid system to the wheels. Pressing to turn the system off may make it easier for you to rock the vehicle in order to free it. To turn the TRAC system off, quickly press and release . “ Traction Control Turned OFF” will be shown on the multi-information display. Press again to turn the system back on. Turning off both TRAC and VSC systems To turn the TRAC and VSC systems off, press and hold for more than 3 seconds while the vehicle is stopped. The VSC OFF indicator light will come on and the “ Traction Control Turned OFF” will be shown on the multi-information display.^* Press again to turn the systems back on. ^*PCS will also be disabled (only Pre-Collision warning is available). The PCS warning light will come on and a message will be displayed on the multi-information display. (If VSC is disabled) When the message is displayed on the multi-information display showing that TRAC has been disabled even if has not been pressed TRAC is temporary deactivated. If the information continues to show, contact your Toyota dealer. Operating conditions of hill-start assist control When the following four conditions are met, the hill-start assist control will operate: The shift lever is in a position other than P or N (when starting off forward/backward on an upward incline). The vehicle is stopped. The accelerator pedal is not depressed. The parking brake is not engaged. Automatic system cancelation of hill-start assist control The hill-start assist control will turn off in any of the following situations: The shift lever is shifted to P or N. The accelerator pedal is depressed. The parking brake is engaged. 2 seconds at maximum elapsed after the brake pedal is released. Sounds and vibrations caused by the ABS, brake assist, VSC, TRAC and hill-start assist control systems Any of the following conditions may occur when the above systems are operating. None of these indicates that a malfunction has occurred. Vibrations may be felt through the vehicle body and steering. A motor sound may be heard also after the vehicle comes to a stop. ECB operating sound ECB operating sound may be heard in the following cases, but it does not indicate that a malfunction has occurred. Operating sound heard from the engine compartment when the brake pedal is depressed repeatedly, when the hybrid system is started or just after the vehicle begins to move. Operating sound heard from the engine compartment when the brake pedal is operated. Motor sound of the brake system heard from the front part of the vehicle when the driver’s door is opened. Operating sound heard from the engine compartment when one or two minutes passed after the stop of the hybrid system. Active Cornering Assist operation sounds and vibrations When the Active Cornering Assist is operated, operation sounds and vibrations may be generated from the brake system, but this is not a malfunction. EPS operation sound When the steering wheel is operated, a motor sound (whirring sound) may be heard. This does not indicate a malfunction. Automatic reactivation of TRAC and VSC systems After turning the TRAC and VSC systems off, the systems will be automatically re-enabled in the following situations: When the power switch is turned off. If only the TRAC system is turned off, the TRAC will turn on when vehicle speed increases.If both the TRAC and VSC systems are turned off, automatic re-enabling will not occur when vehicle speed increases. Operating conditions of Active Cornering Assist The system operates when the following occurs. TRAC/VSC can operate The driver is attempting to accelerate while turning The system detects that the vehicle is drifting to the outer side The brake pedal is released Reduced effectiveness of the EPS system The effectiveness of the EPS system is reduced to prevent the system from overheating when there is frequent steering input over an extended period of time. The steering wheel may feel heavy as a result. Should this occur, refrain from excessive steering input or stop the vehicle and turn the hybrid system off. The EPS system should return to normal within 10 minutes. Secondary Collision Brake operating conditions The system operates when the SRS airbag sensor detects a collision while the vehicle is in motion. However, the system does not operate in any of the following situations. The vehicle speed is below 6 mph (10 km/h) Components are damaged Secondary Collision Brake automatic cancellation The system is automatically canceled in any of the following situations. The vehicle speed drops below approximately 6 mph (10 km/h) A certain amount of time elapses during operation The accelerator pedal is depressed a large amount If a message about AWD is shown on the multi-information display Perform the following actions.

Message	Details/Actions
“ AWD System Overheated Switching to 2WD Mode”	AWD system is overheating. Stop the vehicle in a safe place and let the engine idle. Once the display message on the multi-information display turns off, there is no problem continuing to drive. If the message does not disappear, have your vehicle checked by your Toyota dealer immediately.
“ AWD System Overheated 2WD Mode Engaged”	The vehicle switched from all-wheel drive (AWD) to front wheel drive due to overheating. Stop the vehicle in a safe place and let the engine idle. Once the display message on the multi-information display turns off, the AWD system returns to normal. If the message does not disappear, have your vehicle checked by your Toyota dealer immediately.
“ AWD System Malfunction 2WD Mode Engaged Visit Your Dealer”	A malfunction occurred in the AWD system. Have your vehicle checked by your Toyota dealer immediately.

Warning: The ABS does not operate effectively when The limits of tire gripping performance have been exceeded (such as excessively worn tires on a snow covered road). The vehicle hydroplanes while driving at high speed on wet or slick roads. Stopping distance when the ABS is operating may exceed that of normal conditions The ABS is not designed to shorten the vehicle’s stopping distance. Always maintain a safe distance from the vehicle in front of you, especially in the following situations: When driving on dirt, gravel or snow-covered roads When driving with tire chains When driving over bumps in the road When driving over roads with potholes or uneven surfaces TRAC/VSC may not operate effectively when Directional control and power may not be achievable while driving on slippery road surfaces, even if the TRAC/VSC system is operating.Drive the vehicle carefully in conditions where stability and power may be lost. Active Cornering Assist does not operate effectively when Do not overly rely on Active Cornering Assist. Active Cornering Assist may not operate effectively when accelerating down slopes or driving on slippery road surfaces. When Active Cornering Assist frequently operates, Active Cornering Assist may temporarily stop operating to ensure proper operation of the brakes, TRAC and VSC. Hill-start assist control does not operate effectively when Do not overly rely on hill-start assist control. Hill-start assist control may not operate effectively on steep inclines and roads covered with ice. Unlike the parking brake, hill-start assist control is not intended to hold the vehicle stationary for an extended period of time. Do not attempt to use hill-start assist control to hold the vehicle on an incline, as doing so may lead to an accident. When the TRAC/ABS/VSC is activated The slip indicator light flashes. Always drive carefully. Reckless driving may cause an accident. Exercise particular care when the indicator light flashes. When the TRAC/VSC systems are turned off Be especially careful and drive at a speed appropriate to the road conditions. As these are the systems to help ensure vehicle stability and driving force, do not turn the TRAC/VSC systems off unless necessary. Replacing tires Make sure that all tires are of the specified size, brand, tread pattern and total load capacity. In addition, make sure that the tires are inflated to the recommended tire inflation pressure level.The ABS, TRAC and VSC systems will not function correctly if different tires are installed on the vehicle.Contact your Toyota dealer for further information when replacing tires or wheels. Handling of tires and the suspension Using tires with any kind of problem or modifying the suspension will affect the driving assist systems, and may cause a system to malfunction. Secondary Collision Brake Do not rely solely upon the Secondary Collision Brake. This system is designed to help reduce the possibility of further damage due to a secondary collision, however, that effect changes according to various conditions. Overly relying on the system may result in death or serious injury.