Multi-information display (7-inch display)

The multi-information display is used to display fuel efficiency related information and various types of driving-related information. The multi-information display can also be used to change the display settings and other settings.

Multi-information display Display contents Display contents

Following information is displayed on the multi-information display.

Driving support system information

Display the operational status of the following systems:

LTA (Lane Tracing Assist) (LTA (Lane Tracing Assist))

Dynamic radar cruise control with full-speed range (Dynamic radar cruise control with full-speed range)

RSA (Road Sign Assist) (if equipped)

Displays recognized signs while the RSA (Road Sign Assist) (if equipped) is operating. (RSA (Road Sign Assist)*)

Information display area

A variety of information can be displayed by selecting a menu icon.

Additionally, warning or suggestion/advice pop-up displays will be displayed in some situations.

Menu icons (Menu icons)

Note:

The multi-information display is displayed when

The power switch is in ON.

When changing to a driving mode other than normal mode

When changing to a driving mode other than normal mode (vehicles with 7-inch display)

Liquid crystal display

Small spots or light spots may appear on the display. This phenomenon is characteristic of liquid crystal displays, and there is no problem continuing to use the display.

Steering wheel Meter control switches

Switches Meter control switches

Steering wheel Meter control switches

Multi-information display Changing the display

Multi-information display Meter control switches

Meter control switches

Meter Meter control switches Changing the display

The multi-information display is operated using the meter control switches.

Scroll the screen^*/switch the display^*/move the cursor

Press: Enter/SetPress and hold: Reset/Display customizable items

Return to the previous screen

Call sending/receiving and history displayLinked with the hands-free system, sending or receiving call is displayed. For details regarding the hands-free system, refer to “ NAVIGATION AND MULTIMEDIA SYSTEM OWNER’S MANUAL”.

On screens where the screen can be scrolled and the display can be switched, a scroll bar or a round icon that shows the number of registered screens is displayed.

Warning:

Caution for use while driving

For safety, avoid operating the meter control switch while driving as much as possible, and do not look continuously at the multi-information display while driving. Stop the vehicle and operate the meter control switch. Failure to do so may cause a steering wheel operation error, resulting in an unexpected accident.

Multi-information display Menu icons

Menu iconsMenu icons

Information related to each icon can be displayed by selecting the icon with the meter control switches.

Some of the information may be displayed automatically depending on the situation.


Icon	Display
	Driving information display (Driving information display)
	Driving support system information display (Driving support system information display)
	Audio system-linked display (Audio system-linked display)
	Vehicle information display (Vehicle information display)
	Settings display (Settings display)
	Warning message display (Warning message display)

Multi-information display Driving information display

Driving information display

Display Driving information Driving information display

Select to display fuel consumption data in various forms.

Average vehicle speed

Current fuel economy

Average fuel economyFuel Economy

Current fuel consumption

Displays the instantaneous current fuel consumption.

Average fuel economy (after start)

Displays the average fuel consumption since hybrid system start.^*1

Driving range

Displays the driving range with remaining fuel. (Distance to empty)

Gadget^*2

The following items can be displayed by changing the settings for gadget content and fuel economy type on . (Settings display)

No Display:

No item

Average speed

Displays average vehicle speed

Distance

Displays the distance driven

Total time

Displays elapsed time

Speedometer display

Displays the vehicle speed.

Average fuel economy

Displayed item (listed below) can be changed on the fuel economy type screen of . (Settings display)

Total (after reset)

Displays the average fuel consumption since the display was reset.^{*1, 3}

Trip (after started)

Average fuel economy since the hybrid system was started.

Tank (after refuel)

Displays the average fuel consumption since the vehicle was refueled.^*1

When only a small amount of fuel is added to the tank, the display may not be updated.When refueling, turn the power switch off. If the vehicle is refueled without turning the power switch off, the display may not be updated.

^*1

Use the displayed fuel consumption as a reference only.

^*2

The default setting is no display.

^*3

This display can be reset by pressing and holding while it is displayed.

ECO Accelerator Guidance/“ Eco Score”

Displays a reference operation range for using the accelerator pedal according to driving conditions, and a score result that evaluates the current driving status.

ECO Accelerator Guidance

“ Eco Score”

ECO Accelerator Guidance

ECO area

Shows that the vehicle is being driven in an Eco-friendly manner.

Power area

Shows that an Eco-friendly driving range is being exceeded (during full power driving etc.).

Current acceleration

Reference operation range

A zone is displayed in blue under the Eco area which can be used as a reference operation range for using the accelerator pedal according to driving conditions such as starting off and cruising.

The ECO Accelerator Guidance display changes according to the driving status, such as when starting off or cruising.

It is easier to drive in an Eco-friendly manner by driving according to the display showing the accelerator pedal operations and staying within the reference operation range.

“ Eco Score”

The driving status for the following 3 situations are evaluated in 5 levels: Smooth start-off acceleration (“ Start”), driving without sudden acceleration (“ Cruise”) and smooth stopping (“ Stop”). Each time the vehicle is stopped, a score result is displayed out of a perfect score of 100 points.

Eco start status

Eco cruise status

Eco stop status

Score result

Not yet evaluated

Low

High

After the hybrid system is started, the Eco score will not be displayed until the vehicle speed exceeds approximately 12 mph (20 km/h).

The Eco score will be reset each time the hybrid system is started.

When the hybrid system is stopped, the total score of the current trip will be displayed.

Speedometer display/Distance to empty

Speedometer display

Displays the vehicle speed.

Distance to empty

Displays the driving range with remaining fuel. (Distance to empty)

Elapsed timeEV Ratio/EV Driving Ratio

EV ratio after starting

Displays the elapsed time since hybrid system start.^*

EV driving ratio after starting

The percent traveled using only electric motor power after starting the hybrid system is displayed.^*

It is reset each time the hybrid system stops.

Note:

Distance to empty

This distance is computed based on your average fuel consumption. As a result, the actual distance that can be driven may differ from that displayed.

When only a small amount of fuel is added to the tank, the display may not be updated. When refueling, turn the power switch off. If the vehicle is refueled without turning the power switch off, the display may not be updated.

When “ Refuel” is displayed, the remaining fuel amount is low and the distance that can be driven with the remaining fuel cannot be calculated.Refuel immediately.

ECO Accelerator Guidance/“ Eco Score” will not operate when

The ECO Accelerator Guidance/“ Eco Score” will not operate in the following situations:

The Hybrid System Indicator is not operating.

The vehicle is being driven using the dynamic radar cruise control with full-speed range.

Multi-information display Driving support system information display

Driving support system information displayDriving support system information display

Driving support system information display

Select to display the operational status of the following systems:

LTA (Lane Tracing Assist) (LTA (Lane Tracing Assist))

RSA (Road Sign Assist) (if equipped) (RSA (Road Sign Assist)*)

Dynamic radar cruise control with full-speed range (Dynamic radar cruise control with full-speed range)

Navigation system-linked display

Multi-information display Navigation system-linked display Navigation system-linked display (if equipped)

Select to display the following navigation system-linked information.

Route guidance to destination

Compass display (heading-up display)

Note:

Route guidance to destination display

When the route guidance to destination display is enabled on the head-up display (if equipped), it will not be displayed on the multi-information display. (Using the head-up display)

Multi-information display Audio system-linked display Audio system-linked display

Select to enable selection of an audio source or track on the display.

Multi-information display Vehicle information display Vehicle information display

Energy monitor

Energy monitor/consumption screen

Tire pressure

Tire pressure warning system

AWD system display

Torque distribution display

Displays the drive status of each wheel in 6 steps from 0 to 5.

G-force display^*

Displays the size and direction of the G-force applied to the vehicle via changes to the position of the ball on the display.

Maximum G-force course^*

This item is linked with the G-force display and the course of the past movement of the ball is displayed.

Press and hold to reset the record.

Wheel spin display

When a tire is spinning, its icon on the display changes its color and blinks.

This item is displayed only when driving mode is set to sport mode.

Using the Toyota multi-operation touch (if equipped)

Select to display the vehicle information screen. (Toyota multi-operation touch overview)

Select “ Info” from split-screen.

Displaying a screen in full screen (Displaying a screen in full screen)

Reset the record Maximum G-force course using the Toyota multi-operation touch (if equipped)

Select “ Clear” when displayed full screen.

Safety system status

Select to display the operational status of the following systems:

PCS (Pre-Collision System) (PCS (Pre-Collision System))

Intuitive parking assist (if equipped) (Intuitive parking assist*)

BSM (Blind Spot Monitor) (BSM (Blind Spot Monitor))

RCTA (Rear Cross Traffic Alert) (BSM (Blind Spot Monitor))

Multi-information display Settings

Meter Settings Settings display

Vehicle settings and the content displayed on the screen can be changed by using the meter control switches.

Setting procedure

Operate or of the meter control switches and select .

Operate or of the meter control switches and select the desired item.

If the function is turned on and off or the volume, etc. is changed on the setting screen, the setting is changed each time is pressed.

For functions that allow operation contents, display contents, etc., of function to be selected, the setting screen is displayed by pressing and holding . When the setting screen is displayed, select the setting or desired value (time, etc.) with .

After changing the settings, press of the meter control switches.

LTA (Lane Tracing Assist) (LTA (Lane Tracing Assist))

Select to set up the following items.

“ Lane Center”

Select to enable/disable the lane centering function.

“ Steering Assist”

Select to enable/disable steering wheel assistance.

“ Alert”

Select to set the alert type.

“ Sensitivity”

Select to set the warning sensitivity.

“ Sway Warning”

Select to enable/disable the vehicle sway warning.

“ Sway Sensitivity”

Select to set the vehicle sway warning sensitivity.

PCS (Pre-Collision System) (PCS (Pre-Collision System))

Select to set up the following items.

PCS on/off

Select to enable/disable the pre-collision system.

“ Sensitivity”

Select to change the pre-collision warning timing.

BSM (Blind Spot Monitor) (BSM (Blind Spot Monitor))

Select to set up the following items.

BSM (Blind Spot Monitor) on/off

Select to enable/disable the BSM system.

“ Brightness”

Select to switch the brightness of the outside rear view mirror indicators. (System components)

“ Sensitivity”

Select to change the alert timing for an approaching vehicle.

(Intuitive parking assist) (if equipped) (Intuitive parking assist*)

Select to set up the following items.

Intuitive parking assist on/off

Select to enable/disable the Intuitive parking assist.

“ Volume”

Select to set the volume of the buzzer which sounds when the Intuitive parking assist is operated.

RCTA (Rear Cross Traffic Alert) (BSM (Blind Spot Monitor))

RCTA (Rear Cross Traffic Alert) on/off

Select to enable/disable the RCTA system.

“ Volume”

Select to change the RCTA buzzer volume.

PKSB (Parking Support Brake System) (if equipped) (PKSB (Parking Support Brake)*)

Select to enable/disable the Parking Support Brake function.

HUD (Head-up display) (if equipped) (Using the head-up display)

Select to change the head-up display setting.

RSA (Road Sign Assist) (if equipped) (RSA (Road Sign Assist)*)

Select to set up the following items.

Road Sign Assist on/off

Select to enable/disable the RSA (Road Sign Assist).

“ Notification method”

Select to change each notification method used to notify the driver when the system recognizes excess speed and no-entry sign.

“ Notification Level”

Select to change each notification level used to notify the driver when the system recognizes a speed limit sign.

Vehicle Settings

PBD (Power Back Door) (Opening/closing the back door)

Select to set up the following items.

System settings

Select to enable/disable the power back door system.

“ Hands Free” (if equipped)

Select to enable/disable the Hands Free Power Back Door operation.

“ Opening Adjustment”

Select the open position when power back door is fully open.

“ Volume”

Select to set the volume of the buzzer which sounds when the power back door system operates.

“ TPWS setting” (Tire Pressure Warning System) (Tire pressure warning system)

“ Setting Pressure”

Select to initialize the tire pressure warning system.

“ Identify Wheel”

Select to register the ID codes of the tire pressure sensors to the tire pressure warning system.

“ Setting Unit”

Select to change the units of measure displayed.

Rear Seat Reminder (Rear seat reminder function)

Select to enable/disable the rear seat reminder function.

“ Scheduled Maintenance” (Resetting the message indicating maintenance is required)

Select to reset the scheduled maintenance information (message indicating maintenance is required and distance until the next maintenance) after all maintenance is performed.

Oil Maintenance

Select to reset the Oil maintenance. (Engine oil consumption)

Multi-information display Language

Multi-information display Pop-up display

Multi-information display Units

Meter Units

Language (multi-information display)

Settings

“ Language”

Select to change the language on the multi-information display.

“ Units”

Select to change the units of measure displayed.

(EV indicator) (EV indicator)

Select to enable/disable the EV indicator.

Digital Speed (Speedometer display/Distance to empty)

Select to enable/disable the Digital Speed.

Gadget Content

Select to change the Gadget setting.

Fuel Economy Type (Driving information display)

Select to change the drive information type display between trip, total and tank.

“ Pop-Up Display”

Select to enable/disable the following pop-up displays, which may appear in some situations.

Intersection guidance display of the navigation system-linked system (if equipped)

Incoming call display of the hands-free phone system

Audio operation

Volume operation

Voice control (if equipped)

Brightness

“ MID OFF”

A blank screen is displayed.

“ Default Settings”

Select to reset the meter display settings.

Note:

Tire pressure

It may take a few minutes to display the tire inflation pressure after the power switch is turned to ON. It may also take a few minutes to display the tire inflation pressure after inflation pressure has been adjusted.

“ ---” may be displayed if the tire position information cannot be determined due to unfavorable radio wave conditions.

Tire inflation pressure changes with temperature. The displayed values may also be different from the values measured using a tire pressure gauge.

Suspension of the settings display

In the following situations, operation of the settings display will be temporarily suspended.

When a warning message appears on the multi-information display

When the vehicle begins to move

Settings for functions not equipped to the vehicle are not displayed.

When a function is turned off, the related settings for that function are not selectable.

Warning:

Cautions during setting up the display

As the hybrid system needs to be operating during setting up the display, ensure that the vehicle is parked in a place with adequate ventilation. In a closed area such as a garage, exhaust gases including harmful carbon monoxide (CO) may collect and enter the vehicle. This may lead to death or a serious health hazard.

Notice:

During setting up the display

To prevent 12-volt battery discharge, ensure that the hybrid system is operating while setting up the display features.

Multi-information display Warning message display

Meter Warning messages Warning message display

Select to display warning messages and measures to be taken if a malfunction is detected. (If a warning message is displayed)

Suggestion function

Multi-information display Suggestion function Suggestion function

Displays suggestions to the driver in the following situations. To select a response to a displayed suggestion, use the meter control switches.

Suggestion to enable the power back door

If the power back door system is disabled (setting on set to off) and the power back door switch on the instrument panel is operated, a suggestion message will be displayed asking if you wish to enable the power back door system. To enable the power back door system, select “Yes”.

After enabling the power back door system, press the power back door switch again to open or close the power back door.

Suggestion to turn on the headlights

If the headlight turn off, and the vehicle speed is 3 mph (5 km/h) or higher for a certain amount of time when the surroundings are dark, a suggestion message will be displayed.

Suggestion to turn off the headlights

If the headlights are left on for a certain amount of time after the power switch has been turned off, a suggestion message will be displayed.

When the headlight switch is in the AUTO position: The message asking if you wish to turn the headlights off is displayed. To turn the headlights off, select “ Yes”.

If the driver’s door is opened after the power switch is turned off, this suggestion message will not be displayed.

Suggestion to close the power windows (Driving at high speeds)

If the vehicle speed exceeds a certain speed with a power window open, a suggestion message will be displayed asking if you wish to close the power windows. To close all of the power windows, select “ Yes”.

Note:

Customization

The suggestion function can be turned on/off. (Customizable features: Gauges, meters and multi-information display (, , , ))