Driving position memory^{* *}If equipped This feature automatically adjusts the positions of the driver’s seat to make entering and exiting the vehicle easier or to suit your preferences. When My Settings is turned on: Driving positions for the registered drivers (3 patterns) and guest (1 pattern) can be registered in My Settings. When electronic key assignment is registered for My Settings, the driving position for each driver can be recalled (memory recall function). When My Settings is turned off: Up to 2 different driving positions can be recorded. Each electronic key can be registered to recall your preferred driving position (memory recall function). For details about My Settings, refer to My Settings. Driving position memory Power easy access system Seats Power easy access system Power easy access system Front seats Power easy access system Enabling easier driver entry and exit (power easy access system) When all of the following have been performed, the driver’s seat is automatically adjusted to a position that allows driver to enter and exit the vehicle easily. The shift position has been shifted to P. The power switch has been turned to OFF. The driver’s seat belt has been unfastened. When any of the following has been performed, the driver’s seat automatically returns to its original position. The power switch has been turned to ACC or ON. The driver’s seat belt has been fastened. Note: Operation of the power easy access system When exiting the vehicle, the power easy access system may not operate if the seat is already close to the rearmost position, etc. If the seat position is adjusted during power easy access system operation, the automatic operation will stop. (The seat will change to manual operation.) If the seat position is adjusted during or after the power easy access system operation when the driver is exiting the vehicle, the power easy access system will not operate when entering the vehicle. Jam protection function Power easy access system Jam protection function If a person or object interferes while the seat is moving automatically, the operation will stop. Customization The seat movement amount settings of the power easy access system can be customized. (Customizable features: Customizable features) Seat position memory Front seats Seat position memory Driver’s seat position memory Driving position memory Driver’s seat position memory Driving position memory Seat position memory Switches Driving position memory buttons Seats Seat position memory Recording/recalling a driving position Recording procedure Check that the shift position is in P. Turn the power switch to ON. Adjust the driver’s seat to the desired positions. While pressing the “ SET” button, or within 3 seconds after the “ SET” button is pressed, press button “ 1” or “ 2” until the buzzer sounds. If the selected button has already been preset, the previously recorded position will be overwritten. Recall procedure Check that the shift position is in P. Turn the power switch to ON. Press one of the buttons for the driving position you want to recall until the buzzer sounds. Note: To stop the position recall operation part-way through Perform any of the following: Press the “ SET” button. Press button “ 1” or “ 2”. Operate any of the seat adjustment switches. Jam protection function Driving position memory Jam protection function If a person or object interferes while the seat is moving automatically, the operation will stop. Using the voice control system (if equipped) The following operations can be performed using the voice control system: Driving position registration Recalling the driving position (can be operated only when the shift position is in P) For details regarding the voice control system, refer to the “ MULTIMEDIA OWNER’S MANUAL”. Seat positions that can be memorized (Adjustment procedure) The adjusted positions other than the position adjusted by lumbar support switch can be recorded. Operating the driving position memory after turning the power switch to OFF Recorded seat positions can be activated up to 180 seconds after the driver’s door is opened and another 60 seconds after it is closed again. In order to correctly use the driving position memory function If a seat position is already in the furthest possible position and the seat is operated in the same direction, the recorded position may be slightly different when it is recalled. When recalling the driving position Take care when recalling the driving position so that the head restraint does not touch the ceiling. When the recorded seat position cannot be recalled The seat position may not be recalled in some situations when the seat position is recorded in a certain range. For details, contact your Toyota dealer. Warning: Seat adjustment caution Take care during seat adjustment so that the seat does not strike the rear passenger or squeeze your body against the steering wheel. Seats Memory recall function Front seats Memory recall function Driving position memory Memory recall function Driver’s seat position memory Memory recall function Registering/recalling/canceling a driving position to an electronic key (memory recall function) When My Settings is turned off Registering procedure Record your driving position to button “ 1” or “ 2” before performing the following: Carry only the electronic key you want to register, and then close the driver’s door. If 2 or more electronic keys are in the vehicle, the driving position cannot be recorded properly. Check that the shift position is in P. Turn the power switch to ON. Recall the driving position that you want to record. While pressing the recalled button, press and hold the door lock switch (either lock or unlock) until the buzzer sounds. If the button could not be registered, the buzzer sounds continuously for approximately 3 seconds. Recall procedure Make sure that the doors are locked before recalling the driving position. Carry the electronic key that has been registered to the driving position, and then unlock and open the driver’s door using the smart key system or wireless remote control. The driver’s seat will move to a position slightly behind the recorded position in order to make entering the vehicle easier. If the driving position is in a position that has already been recorded, the driver’s seat will not move. Turn the power switch to ACC or ON, or fasten a seat belt. The driver’s seat will move to the recorded position. Cancelation procedure Carry only the key you want to cancel and then close the driver’s door. If 2 or more keys are in the vehicle, the driving position cannot be canceled properly. Check that the shift position is in P. Turn the power switch to ON. While pressing the “ SET” button, press and hold the door lock switch (either lock or unlock) until the buzzer sounds twice. If the button could not be canceled, the buzzer sounds continuously for approximately 3 seconds. When My Settings is turned on (an individual is identified with an electronic key) The driving positions can be automatically recalled for each registered driver by registering electronic key assignments in My Settings. Registering procedure When shifting the shift position to P after driving the vehicle, the current driving position will be recorded. Recalled procedure Carry only the electronic key that has been assigned and registered in My Settings, and then unlock and open the driver’s door using the smart key system or wireless remote control. The driver’s seat will move to a position slightly behind the recorded position in order to make entering the vehicle easier. If the driving position is in a position that has already been recorded, the driver’s seat will not move. Turn the power switch to ACC or ON. The driver’s seat will move to the recorded position. Cancelation procedure Refer to the “ MULTIMEDIA OWNER’S MANUAL”. Note: Recalling the driving position using the memory recall function Different driving positions can be registered for each electronic key. Therefore, the driving position that is recalled may be different depending on the key being carried. If the a door other than the driver’s door is unlocked with the smart key system, the driving position cannot be recalled. In this case, press the driving position button which has been set. Jam protection function Memory recall function Jam protection function If a person or object interferes while the seat is moving automatically, the operation will stop.