Head restraints Head restraints are provided for all seats. Warning: Head restraint precautions Observe the following precautions regarding the head restraints.Failure to do so may result in death or serious injury. Use the head restraints designed for each respective seat. Adjust the head restraints to the correct position at all times. After adjusting the head restraints, push down on them and make sure they are locked in position. Do not drive with the head restraints removed. Vertical adjustment Front seats Up Pull the head restraints up. Down Push the head restraint down while pressing the lock release button . Rear outboard seats Up Pull the head restraints up. Down Push the head restraint down while pressing the lock release button . Rear center seat Head restraints cannot be adjusted. Note: Adjusting the height of the head restraints Make sure that the head restraints are adjusted so that the center of the head restraint is closest to the top of your ears. Removing the head restraints Front seats Pull the head restraint up while pressing the lock release button . If the head restraint touches the ceiling, making the removal difficult, change the seat height or angle. (Adjustment procedure) Rear outboard seats Pull the seatback lock release lever and fold down the seatback until it reaches the position where the head restraints can be removed. Pull the head restraint up while pressing the lock release button . Installing the head restraints Front seats Align the head restraint with the installation holes and push it down to the lock position. Press and hold the lock release button when lowering the head restraint. Rear outboard seats Pull the seatback lock release lever and fold down the seatback until it reaches the position where the head restraints can be installed. Align the head restraint with the installation holes and push it down to the lowest lock position. Press and hold the lock release button when lowering the head restraint.