How to charge This section explains the procedure for charging the hybrid battery (traction battery) with AC charging cable. When using an AC charger, make sure to check the operation instructions on the AC charger. When the charging schedule is registered, make sure “ Charge Now” is turned on before charging. (Setting “Charge Now” to onOperation on “Charging Schedule” screenOperation on “Trip Summary” screen, Turning “Charge now” on) Notice: When using the AC charging cable and related parts To prevent damage to the AC charging cable and related parts, observe the following precautions. When interrupting or canceling charging, remove the charging connector before removing the plug. When removing the AC charging cable, check that the charging connector is unlocked. Do not forcefully pull the charging connector cap. Do not apply a vibration to the charging connector while charging. Charging may be stopped. Do not insert anything but the charging connector into the AC charging inlet. When inserting the plug into or removing the plug from the outlet, make sure to hold the body of the plug. Do not forcefully pull the AC charging cable that is caught or entangled. If the cable is entangled, disentangle it before using. Do not disassemble, repair or modify the AC charging inlet. When the AC charging inlet needs to be repaired, consult your Toyota dealer. Charging precautions Confirm the following before charging When charging Prepare the AC charging cable. Insert the plug of the AC charging cable into the electrical outlet of the external power source. Make sure to hold the body of the plug and insert it firmly into the outlet. When the remote switch is equipped, turn it on. Check that the power indicator on the CCID (Charging Circuit Interrupting Device) is illuminated. (If it is not illuminated, refer to When a malfunction occurs during charging) In order to reduce the load on the outlet and plug, when inserting the plug, use a string, etc. to hang the CCID (Charging Circuit Interrupting Device) on a hook or equivalent. Open the charging port lid. (Locking and unlocking AC charging connector) The AC charging inlet light will illuminate. Remove the charging connector cap and secure it to the cable. Insert the charging connector into the AC charging inlet. Align the guide position on the bottom of the charging connector, and push the charging connector straight into the AC charging inlet as far as possible. Once a click sound is heard, check that the charging connector is securely locked. When the charging connector is inserted straight as far as possible, it will automatically lock. (Locking the charging connector) Confirm that the charging indicator of the charging port is illuminated. Charging will not start if the charging indicator does not illuminate when the charging connector is inserted. (Charging indicator) If the charging indicator is flashing, the charging schedule is registered. (Using the charging schedule function) If the error warning indicator on the CCID (Charging Circuit Interrupting Device) flashes during charging, check If the charging indicator of the charging port flashes after connecting the AC charging cable and follow the correction procedure. The charging indicator will turn off when charging is completed. The charging indicator will also turn off when charging is stopped for some reason before completion. In this case, refer to When charging cannot be carried out. Note: AC charging cable Charging cable indicator When connecting the AC charging connector If the door is opened or the power switch is turned to ON with the AC charging connector connected, the charging cable indicator turns on to inform that the AC charging connector is connected. If the charging indicator of the charging port flashes after connecting the AC charging cable The charging schedule (Using the charging schedule function) is registered and charging cannot be performed. To cancel charging using the charging schedule and start charging, perform any of the following procedures. Turn “ Charge Now” on (Setting “Charge Now” to onOperation on “Charging Schedule” screenOperation on “Trip Summary” screen, Turning “Charge now” on) While the charging indicator is flashing, remove and reconnect the charging connector immediately When the charging connector cannot be inserted into the AC charging inlet When the AC charging connector cannot be inserted into the AC charging inlet Safety function If the latch release button is pressed, charging will not begin even if the AC charging cable is connected. Also, charging will be stopped if the latch release button is pressed and held for several seconds during charging. When restarting charging, reinsert the charging connector after pulling it out, and check that the charging indicator of the charging port illuminates. Charging time may increase Charging time may increase While charging When the power switch is turned to ON and the energy monitor is displayed on the Multimedia Display, the charging connector is displayed on the energy monitor and the flow of electricity during charging is displayed (Energy monitor/consumption screen/solar charging information screen (if equipped)). When your circuit breaker trips during charging The upper limit of the charging current can be changed on the multi-information display or Multimedia Display. The maximum charging current is limited to less than or equal to the selected current.^* If the breaker still trips while charging, even after changing the upper limit of the charging current, check if the connected power source meets the specified charging conditions. (Power sources) ^*Restricting the charging current will lengthen the charging time. Setting operations on multi-information display For detail regarding the multi-information display, refer to Multi-information display. Press or of the meter control switches to select . Press or of the meter control switches to select “ Vehicle Settings”, and then press and hold . Press or of the meter control switches to select “ Charging Settings”, and then press . The “ Charging Settings” screen will be displayed. Press or of the meter control switches to select “ Charging Current”, and then press . The “ Charging Current” screen will be displayed. Press or of the meter control switches to select “ 8A”, and then press . Setting operations on Multimedia Display For detail regarding the Multimedia Display, refer to “ MULTIMEDIA OWNER’S MANUAL”. Touch on the main menu. Touch “ Vehicle customize” on the sub menu. Touch “ Charging”. Touch “ Charging current”. Touch “ 8A”, and touch “ OK”. Warning: Charging Charging precautions When charging Observe the following precautions. Failure to do so may cause an unexpected accident, resulting in death or serious injury. Connect to a power source suitable for charging. (Power sources) Check that the AC charging cable, plug and outlet are free of foreign matter. Before charging, check that the AC charging inlet is not deformed, damaged or corroded, and check that the inlet is free of foreign matter such as dirt, snow and ice. If there is dirt or dust in these areas, remove completely before inserting the charging connector. Only use outlets where the plug can be securely inserted. Do not bundle or wind the AC charging cable while charging, as doing so may result in overheating. Do not touch the terminals of the charging connector and AC charging inlet with a sharp metal objects (needles etc.) or hands, or short them with foreign objects. When charging outdoors, make sure to connect to a weatherproof outlet for outdoor use. Ensure the weatherproof outlet cover closes completely. If the weatherproof outlet cover cannot be closed, install a weatherproof outlet cover that will close. In order to stop charging at the charging station, follow the instructions of the charger. If any heat, smoke, odors, noise or other abnormalities are noticed during charging, stop charging immediately. Do not insert the plug if the outlet is submerged in water or snow. When charging while it is raining or snowing, do not connect or disconnect the plug if your hands are wet. Also, do not get the plug or outlet wet. Do not charge the vehicle during a lightning storm. Prevent the AC charging cable from being caught in the door or back door. Do not let the wheels on the AC charging cable, plug, charging connector and CCID (Charging Circuit Interrupting Device). Firmly insert the plug into the outlet. Do not use an extension cord and converting adaptor. Close the hood before using the charging system. The cooling fan may start operating suddenly. Touching or getting close to rotating parts such as the fan may cause your hands or clothes (especially a necktie or scarf) to become caught and result in a serious injury. After connecting the charging cable, confirm that it is not wound around anything. If the power indicator on the CCID (Charging Circuit Interrupting Device) does not illuminate after plugging the AC charging cable into the socket-outlet, unplug it immediately. If the error warning indicator on the CCID (Charging Circuit Interrupting Device) illuminates or flashes during charging There may be an electrical leakage in the power source path, or there may be a malfunction in the AC charging cable or CCID (Charging Circuit Interrupting Device). Refer to When a malfunction occurs during charging and follow the correction procedure. If the error warning indicator does not turn off even after performing the correction procedure, immediately stop charging, remove the AC charging cable and contact your Toyota dealer. Continuing to charge the vehicle in that condition may lead to unforeseen accidents or serious injury. Onboard traction battery charger The onboard traction battery charger is located under the luggage compartment. Make sure to observe the following precautions regarding the onboard traction battery charger. Failure to observe these precautions may result in death or serious injury such as burns and electric shocks. The onboard traction battery charger is hot during charging. Do not touch the onboard traction battery charger, as doing so may result in burns. Do not disassemble, repair or modify the onboard traction battery charger. When the onboard traction battery charger needs to be repaired, consult your Toyota dealer. Notice: When charging Do not insert the plug into the AC charging inlet. The AC charging inlet may be damaged. Using private power generator Do not use private power generators as a power source for charging. Doing so may make charging unstable, the voltage may be insufficient, and the charging operation may stop. Charging station Due to the environment in which the power equipment is located, charging may be unstable due to noise, the voltage may be insufficient, and the charging operation may stop. After charging Unlock the doors to unlock the charging connector. (Unlocking the charging connector) The charging connector will be unlocked and the AC charging inlet light will illuminate when the doors are unlocked. Pull the charging connector towards you while pressing the latch release button. If the latch release button is pressed during charging (while the charging indicator is illuminated), charging will be interrupted. Attach the charging connector cap. Close the charging port lid. Remove the plug from the outlet when the charging equipment will not be used for a prolonged period of time. Hold the body of the plug when removing. Make sure to put the cable away immediately after disconnecting. (After charging) When leaving the plug inserted, inspect the plug and connector once a month to check if dirt or dust has accumulated. Note: When the outside temperature is low or high The level shown on the SOC (State of Charge) gauge (Meter display) may drop slightly when the power switch is turned to ON, even if charging has been completed and the hybrid battery (traction battery) is fully charged. However, this does not indicate a malfunction. When removing the charging connector Press the latch release button, check that the lever raises up, and then pull the charging connector towards you. If the lever does not raise up even after the latch release button is pressed, the charging connector is locked. If this occurs, unlock the doors using the smart key system or wireless remote control to unlock the charging connector. (Locking and unlocking AC charging connector) If the charging connector cannot be unlocked If the AC charging connector cannot be unlocked Warning: After charging Remove the plug if it will not be used for a long time. Dirt and dust may accumulate plug or outlet, which could cause a malfunction or fire, possibly leading to death or serious injury. Notice: After charging Store the AC charging cable out of reach from infants and children. After removing the plug from the outlet, keep it in a safe place free from moisture and dust. The AC charging cable or plug may be damaged if the cable is stepped on or ridden over by the vehicle. After removing the AC charging connector from the AC charging inlet, make sure to close the AC charging port lid. If the AC charging port lid is left open, water or foreign objects may enter the AC charging inlet, which could lead to vehicle damage.