Intuitive parking assist* *If equipped The intuitive parking assist function detects the approximate distance from the vehicle and an object such as a wall using ultrasonic sensors and informs the driver with the multimedia display distance display and buzzer. System components Sensor Intuitive parking assist Sensor Parking Support Brake function (static objects) Sensor Toyota Teammate Advanced Park Type of sensors Front corner sensors Front center sensors Rear corner sensors Rear center sensors Front side sensors (vehicles with Advanced Park) Rear side sensors (vehicles with Advanced Park) Display Intuitive parking assist Display When the sensors detect an object, such as a wall, a graphic is shown on the multimedia display depending on the position and distance to the object. Vehicles without multimedia display or rear camera: When detecting a stationary object, the intuitive parking assist detection indicator illuminates. (Indicators) Front corner sensor detection Front center sensor detection Rear corner sensor detection Rear center sensor detection Front side sensor detection (vehicles with Advanced Park) Rear side sensor detection (vehicles with Advanced Park) Intuitive parking assist Enabling/disabling the system Turning the intuitive parking assist function ON/OFF The intuitive parking assist function can be enabled/disabled through a customize setting. (Intuitive parking assist*1) When the intuitive parking assist function is disabled, the intuitive parking assist OFF indicator (Indicators) illuminates on the multi-information display. If the system switches to OFF (disabled) and the intuitive parking assist is stopped, the intuitive parking assist will not be re-enabled until ON (enabled) is selected again from the customize setting (Intuitive parking assist*1).(It remains off even if the power switch is turned to ON again after the power switch has been turned off.) Vehicles without the multimedia display or rear camera: However, the system will automatically turn on (enabled) and the intuitive parking assist OFF indicator will turn off if the shift position is changed to R. When the shift position is R, the intuitive parking assist cannot be turned on or off. The setting of intuitive parking assist itself will not change. Warning: Cautions regarding the use of the system There is a limit to the degree of recognition accuracy and control performance that this system can provide, do not overly rely on this system. The driver is always responsible for paying attention to the vehicle’s surroundings and driving safely. To ensure the system can operate properly Make sure to observe the following precautions. The system may not operate properly and may lead to an unexpected accident. When these precautions cannot be observed, turn the system off. Do not damage the sensors, and always keep them clean. Do not attach a sticker or install an electronic component, such as a backlit license plate (especially fluorescent type), fog lights, fender pole or wireless antenna near a radar sensor. Do not subject the surrounding area of the sensor to a strong impact. If subjected to an impact, have the vehicle inspected by your Toyota dealer. If the front or rear bumper needs to be removed/installed or replaced, contact your Toyota dealer. Do not modify, disassemble or paint the sensors. Do not attach a license plate cover. Keep your tires properly inflated. Do not install a suspension other than a genuine suspension. Notes when washing the vehicle When using a high pressure washer to wash the vehicle, do not spray the sensors directly, as doing so may cause a sensor to malfunction. When using steam to clean the vehicle, do not direct steam too close to the sensors as doing so may cause a sensor to malfunction. Note: The system can be operated when The power switch is in ON. The intuitive parking assist function is on. The vehicle speed is less than about 6 mph (10 km/h). A shift position other than P is selected. Vehicles without the multimedia display or rear camera: The system will automatically turn on (enabled) and the intuitive parking assist OFF indicator will turn off if the shift position is changed to R. The setting of intuitive parking assist itself will not change. Sensor detection information The sensor’s detection areas are limited to the areas around the vehicle’s front and rear bumpers. Certain vehicle conditions and the surrounding environment may affect the ability of a sensor to correctly detect an object. Objects may not be detected if they are too close to the sensor. There will be a short delay between object detection and display. Even at low speeds, there is a possibility that the object will come within the sensor’s detection areas before the display is shown and the warning beep sounds. It might be difficult to hear the buzzer due to the volume of the audio system or air flow noise of the air conditioning system. It may be difficult to hear the sound of this system due to the buzzers of other systems. If the meter malfunctions, the buzzer may not sound. Objects which the system may not be properly detected The shape of the object may prevent the sensor from detecting it. Pay particular attention to the following objects: Wires, fences, ropes, etc. Cotton, snow and other materials that absorb sound waves Sharply-angled objects Low objects Tall objects with upper sections projecting outwards in the direction of your vehicle People may not be detected if they are wearing certain types of clothing. Situations in which the system may not operate properly Certain vehicle conditions and the surrounding environment may affect the ability of a sensor to correctly detect objects. Particular instances where this may occur are listed below. There is dirt, snow, water drops or ice on a sensor. (Cleaning the sensors will resolve this problem.) A sensor is frozen. (Thawing the area will resolve this problem.) In especially cold weather, if a sensor is frozen the sensor display may be displayed abnormally, or objects, such as a wall, may not be detected. When a sensor or the area around a sensor is extremely hot or cold. On an extremely bumpy road, on an incline, on gravel, or on grass. When vehicle horns, vehicle detectors, motorcycle engines, air brakes of large vehicles, the clearance sonar of other vehicles or other devices which produce ultrasonic waves are near the vehicle A sensor is coated with a sheet of spray or heavy rain. If objects draw too close to the sensor. When a pedestrian is wearing clothing that does not reflect ultrasonic waves (ex. skirts with gathers or frills). When objects that are not perpendicular to the ground, not perpendicular to the vehicle traveling direction, uneven, or waving are in the detection range. When strong winds are blowing When driving in inclement weather such as fog, snow or a sandstorm When an object that cannot be detected is between the vehicle and a detected object If an object such as a vehicle, motorcycle, bicycle or pedestrian cuts in front of the vehicle or runs out from the side of the vehicle If the orientation of a sensor has been changed due to a collision or other impact When equipment such as a towing eyelet, transport hook, bumper protector, bumper trim, bicycle carrier or snow-removal device (snow plow) is installed near the sensor If the front of the vehicle is raised or lowered due to the carried load If the vehicle cannot be driven in a stable manner, such as when the vehicle has been in an accident or is malfunctioning When tire chains, compact spare tire or an emergency tire puncture repair kit are used When towing with the vehicle Situations in which the system may operate even if there is no possibility of a collision In some situations, such as the following, the system may operate even though there is no possibility of a collision. When driving on a narrow road When driving toward a banner, flag, low-hanging branch or boom barrier (such as those used at railroad crossings, toll gates and parking lots) When there is a rut or hole in the surface of the road When driving on a metal cover (grating), such as those used for drainage ditches When driving up or down a steep slope If a sensor is hit by a large amount of water, such as when driving on a flooded road There is dirt, snow, water drops or ice on a sensor. (Cleaning the sensors will resolve this problem.) A sensor is coated with a sheet of spray or heavy rain When driving in inclement weather such as fog, snow or a sandstorm When strong winds are blowing When vehicle horns, vehicle detectors, motorcycle engines, air brakes of large vehicles, the clearance sonar of other vehicles or other devices which produce ultrasonic waves are near the vehicle If the front of the vehicle is raised or lowered due to the carried load If the orientation of a sensor has been changed due to a collision or other impact The vehicle is approaching a tall or curved curb Driving close to columns (H-shaped steel beams, etc.) in multi-story parking garages, construction sites, etc. If the vehicle cannot be driven in a stable manner, such as when the vehicle has been in an accident or is malfunctioning On an extremely bumpy road, on an incline, on gravel, or on grass When tire chains, compact spare tire or an emergency tire puncture repair kit are used When towing with the vehicle Sensor detection display, object distance Detection range of the sensors Vehicles without Advanced Park Approximately 3.3 ft. (100 cm) Approximately 4.9 ft. (150 cm) Approximately 2.0 ft. (60 cm) The diagram shows the detection range of the sensors. Note that the sensors cannot detect objects that are extremely close to the vehicle. The range of the sensors may change depending on the shape of the object, etc. Vehicles with Advanced Park Approximately 6.6 ft. (200 cm) The diagram shows the detection range of the sensors. Note that the sensors cannot detect objects that are extremely close to the vehicle. The range of the sensors may change depending on the shape of the object, etc. Warning buzzers Intuitive parking assist The distance and buzzer Vehicles without Advanced Park
Approximate distance to obstacle Buzzer
Front center sensor: Approximately 3.3 ft. (100 cm) to 2.0 ft. (60 cm)* Rear center sensor: Approximately 4.9 ft. (150 cm) to 2.0 ft. (60 cm)* Slow
Approximately 2.0 ft. (60 cm) to 1.5 ft. (45 cm)* Medium
Approximately 1.5 ft. (45 cm) to 1.0 ft. (30 cm)* Fast
Approximately less than 1.0 ft. (30 cm) Continuous
*Automatic buzzer mute function is enabled. (Muting a buzzer) Vehicles with Advanced Park
Approximate distance to obstacle Buzzer
Front center sensor: Approximately 6.6 ft. (200 cm) to 3.3 ft. (100 cm)* Rear center sensor: Approximately 6.6 ft. (200 cm) to 4.9 ft. (150 cm)* Corner sensor: Approximately 6.6 ft. (200 cm) to 2.0 ft. (60 cm)* Side sensor: Approximately 6.6 ft. (200 cm) to 5.4 ft. (165 cm)* Does not sound (Display only)
Front center sensor: Approximately 3.3 ft. (100 cm) to 2.0 ft. (60 cm)* Rear center sensor: Approximately 4.9 ft. (150 cm) to 2.0 ft. (60 cm)* Side sensor: Approximately 5.4 ft. (165 cm) to 2.0 ft. (60 cm)* Slow
Except side sensor: Approximately 2.0 ft. (60 cm) to 1.5 ft. (45 cm)* Side sensor: Approximately 2.0 ft. (60 cm) to 1.3 ft. (40 cm)* Medium
Except side sensor: Approximately 1.5 ft. (45 cm) to 1.0 ft. (30 cm)* Side sensor: Approximately 1.3 ft. (40 cm) to 1.0 ft. (30 cm)* Fast
Approximately less than 1.0 ft. (30 cm) Continuous
*Automatic buzzer mute function is enabled. (Muting a buzzer) Intuitive parking assist buzzer A buzzer sounds when the sensors are operating. The buzzer beeps faster as the vehicle approaches a static object.When the vehicle comes within the approximately 1.0 ft. (30 cm) of the object, the buzzer will sound continuously. When 2 or more sensors simultaneously detect a static object, the buzzer sounds for the nearest object. After a buzzer begins sounding, if the distance between the vehicle and the detected a static object does not become shorter, the buzzer will be muted automatically. (automatic buzzer mute function) Note: Adjusting the buzzer volume The buzzer volume of the intuitive parking assist, RCTA, and RCD* can all be changed at once from the customize settings. (Intuitive parking assist*1) *If equipped Muting a buzzer When the temporary mute switch is displayed on the multimedia display, this switch can be pressed to temporarily mute the buzzer. Select the switch to mute a buzzer of the intuitive parking assist, RCTA, and RCD* all together. Mute will be automatically canceled in the following situations: When the shift position is changed. When the vehicle speed exceeds a certain speed. When there is a malfunction in a sensor or the system is temporarily unavailable. When the operating function is disabled manually. When the power switch is turned off. *If equipped Intuitive parking assist object warning function (vehicles with Advanced Park) The object warning function informs the driver of the existence of objects along the side of the vehicle, using a display and buzzer, if the objects are within the estimated path of the vehicle. Object Calculated vehicle route When the vehicle is moving, the side sensors or side cameras can detect objects. While the vehicle is moving, if a detected object can no longer be detected by the side sensors or side cameras, the location of the object relative to the vehicle is estimated. If the object is determined to be in the estimated path of the vehicle, the object warning function will operate. Object detected by side sensors or side cameras The vehicle is stopped and objects along the sides of the vehicle are not detected. Objects are detected as the vehicle is moving. Even though the objects are outside of the detection area of the side sensors or side cameras, a warning is displayed and a buzzer sounds. Note: Object warning function operating conditions The vehicle moves about 23.0 ft. (7 m) after the EV system is started. The R shift position is selected. After the D shift position has been selected, the vehicle has moved 23.0 ft. (7 m) or less. switch has been pressed and the multimedia display is displayed. The front or rear sensor detects a stationary object. Detection of objects along the sides of the vehicle Objects along the sides of the vehicle are not instantaneously detected. The location of objects in relation to the vehicle is estimated after they are first detected by the front or rear side sensors, or side cameras. Therefore, after the power switch is changed to ON, even if an object is along the side of the vehicle, it may not be detected until the vehicle has been driven a small amount and the side sensors or side cameras completely scan the areas along the sides of the vehicle. If a vehicle, person, animal, etc., is detected by a side sensors or side cameras, but then leaves the detection area of the side sensors or side cameras, the system will assume the object has not moved. Warning: Side sensors and side cameras In situations such as the following, the function may not operate correctly, possibly leading to an accident. Proceed carefully. When starting off shortly after the power switch is turned to ON and a small vehicle or other object which cannot be detected by a front side sensor is next to the vehicle. In the situation shown in the following illustration, even if the vehicle starts off, the vehicle on the left will not be detected and the object warning function will not operate. When an object or person is in a position which cannot be detected by the side sensors or side cameras. When, after the side sensors have completed scanning the areas along the sides of the vehicle, a vehicle, person, or other object approaches the side of the vehicle and cannot be detected. When the outside rear view mirror is closed, the side sensors or side cameras cannot detect objects. If the 12‑volt battery was discharged or has been removed and installed, fold and extend the outside rear view mirrors.