Using the charging schedule function AC charging can be carried out at the desired time by registering the charging schedule. Note: Calendar settings Charging schedule is performed according to the date and time shown on the multi-information display. Refer to the multi-information display manual for settings. If the calendar settings check screen is displayed when an attempt was made to register a charge schedule, check that the correct date is set. If it is incorrect, be sure to correct it. If the calendar information is wrong, the charging schedule function will not operate normally. Settings of the charging schedule function When registering the charging schedule, the following settings can be changed. Select the charging mode One of the two following charging modes can be selected. “ Start” Starts charging at the set time^* and finishes charging when fully charged. “ Start-Stop” AC charging is performed according to the set start time and stop time.^{* *}There might be a slight error in the timing when charging starts due to the state of the traction battery. Repeated setting The periodic charging schedule can be set by selecting your desired day of the week. Select one or more day of the week to do the charging schedule. Turning “ Charge Now” on and off To start charging without changing the charging schedule setting, turn “ Charge Now” on to temporarily cancel the charging schedule and enable charging after connecting the AC charging connector.^{* *}If the charging connector is removed while the charging schedule is registered and “ Charge Now” is on, “ Charge Now” turns off. “ Next Event” Of the registered charging schedules, the closest charging schedule after the current time is called the “ Next Event”. For charging schedule, AC charging will be performed according to the Next Event. Registering the charging schedule The charging schedule can be registered on the multi-information display or multimedia. Multi-information display operation: Setting operations on multi-information display Multimedia operation: Setting operations on multimedia Note: Charging schedule function The charging schedule cannot be set while driving. A maximum of 15 charging schedules can be registered. If the charging mode is set to “ Start-Stop” and the start time and end time are set to the same time, charging will be performed for 24 hours from the start time. The charging schedule function can not be used when using DC charging. To make sure that the charging schedule function operates correctly Check the following items. Adjust the clock to the correct time (Adjusting the clock) The calendar is set to the correct date (Settings display) Check that the power switch is turned off After registering the charging schedule, connect the AC charging connector The charging start time is determined based on the charging schedule at the time that the AC charging connector was connected. Connect the AC charging connector before the start time When the charging mode is set to “ Start”, if you connect the AC charging connector after the set start time, the next charging schedule will be referenced. When the charging mode is “ Start-Stop”, if you connect the AC charging connector after the start time, charging will start immediately and charging will be performed until the stop time. After connecting the AC charging connector, check that the charging indicator of the charging port flashes (Charging indicator) Do not use an outlet that has a power cut off function (including a charging schedule function) Use an outlet that constantly supplies electricity. For outlets where the power is cut off due to a charging schedule function, etc., charging may not be carried out according to plan if the power is cut off during the set time. When the AC charging connector remains connected to the vehicle When the charging mode is set to “ Start”, even if multiple consecutive charging schedules are registered, the next charge will not be carried out according to the charging schedule until the AC charging connector is removed and reconnected after charging completes. Also, when the traction battery is fully charged, charging according to the charging schedule will not be carried out. If the charging stop time is reached before the traction battery is fully charged and the charging mode is set to “ Start-Stop”, the nearest charging schedule after the stop time is updated as the next charging schedule, and charging is repeated until the battery is fully charged. Smartphone-linked operation After applying to Toyota App, it is possible to use the smartphone application to change charging schedule settings. For details about Toyota Apps, refer to http://www.toyota.com/connected-services in the United States and http://www.toyota.ca/connected in Canada. When charging schedules are ignored When the following operations are performed while the charging schedule is on standby, charging schedule is temporarily canceled and charging is started. When the Remote Air Conditioning System (Remote Air Conditioning System) is operated When turning “ My Room Mode” on (Using My Room Mode) When turning “ Charge Now” on (Setting “Charge Now” to onOperation on “Charging Schedule” screenOperation on “Closing Display” screen, Turning “Charge Now” on) When an operation that temporarily cancel charging using the charging schedule (If the charging indicator of the charging port flashes after connecting the AC charging cable) Battery heater (Traction battery heater)/“ Battery Cooler” (Traction battery cooler) Depending on the temperature of the traction battery, the traction battery heater or traction battery cooler may be activated and the charging indicator may light up while the charging schedule is waiting for charging. Charging schedule function Setting Charging Display Charging Information related to charging display Display Charging Multi-information display Charging Setting operations on multi-information display When operating charging schedule, use the meter control switches. Meter control switches (Changing the meter display) Multi-information display Display the “ Charging Schedule” screen Press or of the meter control switches to select . Press or of the meter control switches to select “ Vehicle Settings”, and then press and hold . Press or of the meter control switches to select “ Charging Settings”, and then press . Press or of the meter control switches to select “ Charging Schedule”, and then press . The “ Charging Schedule” screen will be displayed. Registering the charging schedule Display the “ Charging Schedule” screen. (Display the “Charging Schedule” screen). Press or of the meter control switches to select “ Scheduled Events”, and then press . The “ Scheduled Events” screen will be displayed. Press or of the meter control switches to select “ +add”, and then press . The “ Charging Mode” screen will be displayed. Press or of the meter control switches to select the item to change with the cursor, and then press or to change the setting, Select the charging mode, and then press . Set the time that is desired to start the charging when charging mode is “ Start”Set the time that is desired to start and completion time when charging mode is “ Start-Stop”. Setting desired charging time, and press . If you selected the charging mode “ Start-Stop” in step 4, continue to set the stop time. Press or of the meter control switches to select the desired day to activate for the repeated setting, and then press .Each time is pressed, the repeated setting switches between on and off. When set to on, the charging schedule is repeated on that day. It is possible to set more than one day to on.When setting are complete, select “ Done”, and then press .A screen where the settings can be saved will be displayed. Select “ Save” and press .The settings will be saved. After setting operations are complete, when the AC charging connector is connected to the vehicle, charging will be carried out according to the charging schedule settings. Switching charging schedules between on and off The registered charging schedules can be turned on and off. Display the “ Charging Schedule” screen. (Display the “Charging Schedule” screen) Select “ Scheduled Events” and then press . A list of the registered charging schedule will be displayed. Select the item to turn ON/OFF, and then press . Each time is pressed, the selected charging schedule switches between on and off.When set to off, a charging schedule is ignored and charging according to the charging schedule is not carried out. Changing the registered charging schedules The registered charging schedules can be modified or deleted. Display the “ Charging Schedule” screen. (Display the “Charging Schedule” screen) Select “ Scheduled Events” and then press . The “ Scheduled Events” screen will be displayed on the screen. Select the item to operate, and perform the necessary operation. “ Edit” Select the contents are desired to be changed, press and hold the and then select “ Edit”. Change the desired settings as described starting from step 4 of the “ Registering the charging schedule” procedure. (Registering the charging schedule) Select “ Save” and press to save the settings. “ Delete” Select the contents are desired to be changed, press and hold the and then select “ Delete”. A deletion confirmation screen will be displayed. Press or of the meter control switches to select “ Yes”, and then press to delete the selected charging schedule. To cancel deletion of the registered contents, select “ No” and then press . Setting “ Charge Now” to on The “ Charge Now” setting can be changed by performing one of the two following procedures. Operation on “ Charging Schedule” screen Display the “ Charging Schedule” screen. (Display the “Charging Schedule” screen) Press or of the meter control switches to select “ Charge Now”, and then press . Each time is pressed, “ Charge Now” switches between on and off. Operation on “ Closing Display” screen Turn the power switch off. The “ Closing Display” screen^* will be displayed on the multi-information display.(If the door is opened while waiting for charging schedule, the same screen will be displayed.) ^*If “ Closing Display” is not set to “ Charging Schedule” on the screen of the multi-information display, the “ Closing Display” is not displayed. In this case, check the settings on the multi-information display. Press to set “ Charge Now” to on. After setting operations are complete, charging starts when the AC charging connector is connected. Displaying “ Next Event” Display the “ Charging Schedule” screen. (Display the “Charging Schedule” screen) Press or of the meter control switches to select “ Next Event”, and then press . The “ Next Event” screen will be displayed. Note: When charging schedule setting operations are canceled When the vehicle is in the following conditions, charging schedule setting operations are canceled. The power switch is operated before the settings are confirmed The vehicle starts off A display with a higher priority than that of the charging schedule setting is shown When charging schedule are changed while charging If the charging schedule is changed, Next Event will be updated and charging may stop. After changing the charging schedule, please check Next Event. If you want to continue charging, turn on “ Charge Now”. Notice: While performing the setting operation When performing the setting operation while the EV system is stopped, be careful that the 12‑volt battery will not be discharged. Setting operations on multimedia For details on how to operate the audio system screen, refer to “ MULTIMEDIA OWNER’S MANUAL”. Setting operations related to the charging schedule are performed on the “ Charging Schedule” screen. Displaying the “ Charging Schedule” screen Turn the power switch ON and display the menu screen. It is not possible to control the Charging Schedule settings in Accessory Mode. Select and “ Charging Schedule”, in that order. The “ Charging Schedule” screen will be displayed. How to read the “ Charging Schedule” screen Charging schedules Displays the week-long registered charging schedule in a list using icons. “ Add” button Press to add a new item to the charging schedule. (Registering the charging schedule) “ Edit” button Press to change or delete registered items on the charging schedule. (Changing the registered charging schedules) “ Charge Now” button Each time the button is pressed, “ Charge Now” switches between on and off. (Turning “Charge Now” on) Return button Press to close the “ Charging Schedule” screen. Registering the charging schedule Display the “ Charging Schedule” screen. (Displaying the “Charging Schedule” screen) Press “ Add”. The “ Add event” screen will be displayed on the screen. Select the charging mode.Select the button in the row of the “ Start at set time” or “ Start and stop at set times”. Operate “ Start at set time” screen and select desired time, and then select . When the charging mode is “ Start at set time”, set the charging start time.When the charging mode is “ Start and stop at set times”, also set the charging stop time. When activating the repeated settings, select the desired day, and then select . Each time the day is selected, the repeated setting for the selected day switches between on and off.When turned on, the check box is highlighted and the charging schedule is repeated on that day. It is possible to turn more than one day on. After setting operations are complete, press “ Save”. The charging schedule is added to the list and an icon is added to the “ Charging Schedule” screen. Switching charging schedules between on and off Display the “ Charging Schedule” screen. (Displaying the “Charging Schedule” screen) Press “ Edit”. The “ Scheduled Events” screen will be displayed on the screen. From the items displayed on the screen, press on or off in the row of the charging schedule you wish to change. If the charging schedule you wish to change is not displayed on the screen, scroll the list up and down to display it. Each time the button is pressed, the charging schedule switches between on and off. Changing the registered charging schedules Display the “ Charging Schedule” screen. (Displaying the “Charging Schedule” screen) Press “ Edit”. The “ Scheduled Events” screen will be displayed on the screen. Press “ Edit” on the “ Events” screen. From the items displayed on the screen, press “ Edit” in the row of the charging schedule you wish to change. Changing registered items: Change the desired settings as described starting from step 3 of the “ Registering the charging schedule” procedure. (Registering the charging schedule) When a setting is changed, its icon on the calendar also changes. Deleting registered items: Press “ Delete”. A deletion confirmation message will be displayed. Press “ Delete” to delete the selected charging schedule. When a charging schedule is deleted, its icon is also deleted from the “ Charging Schedule” screen. Turning “ Charge Now” on Display the “ Charging Schedule” screen. (Displaying the “Charging Schedule” screen) Press “ Charge Now”. Each time the button is pressed, “ Charge Now” switches between on and off. After setting operations are complete, charging starts when the AC charging connector is connected. Displaying Next Event Turn the power switch off. Next event will be displayed according to the charging schedule settings.^{* *}If the multimedia customize content “ ACC customize” is not set to OFF, the ending screen will not be displayed. If it is this case, check the settings of the multimedia. When press “ OK”, close Next charging event screen. When press “ Charge Now”, charge now is turned on. Note: When all charging schedules are turned off The icon is not displayed on the “ Charging Schedule” screen. The icon will be displayed by turning it ON on the “ Events” screen. When charging schedule setting operations are canceled When the vehicle is in the following conditions, charging schedule setting operations are canceled. The power switch is turned off before the settings are confirmed The vehicle starts off A display with a higher priority than that of the charging schedule setting is shown When charging schedule are changed while charging If the charging schedule is changed, Next Event will be updated and charging may stop. After changing the charging schedule, please check Next Event. If you want to continue charging, turn on “ Charge Now”. Notice: While performing the setting operation When performing the setting operation while the EV system is stopped, be careful that the 12‑volt battery will not be discharged.