Energy monitor/consumption screen You can view the status of your hybrid system and fuel consumption information on the multi-information display and Multimedia Display. System components Multimedia Display Multi-information display Meter control switches Multi-information display Energy monitor Energy monitor The energy monitor can be used to check the vehicle drive status, hybrid system operation status and energy regeneration status. Display procedure Multi-information display Use the meter control switches, display the energy monitor on the multi-information display. For detail regarding the multi-information display, refer to Vehicle information display, Energy monitor. Multimedia Display Press from the main menu, then press “ Energy flow”. Reading the display The arrows will appear in accordance with the energy flow. When there is no energy flow, arrows will not be displayed. The color of the arrows will change as follows Blue: When the hybrid battery (traction battery) is regenerated or charged. Orange: When the hybrid battery (traction battery) is in use. Red: When the gasoline engine is in use. Multi-information display (vehicles with 7-inch display) The image shows all the arrows as an example. The actual display will vary depending on conditions. Gasoline engine Hybrid battery (traction battery) Front tires Rear tires Multi-information display (vehicles with 12.3-inch display) The image shows all the arrows as an example. The actual display will vary depending on conditions. Gasoline engine Front tires Rear tires Hybrid battery (traction battery) Multimedia Display The image shows all the arrows as an example. The actual display will vary depending on conditions. Gasoline engine Front electric motor (traction motor) Hybrid battery (traction battery) Charging connector^*1 Rear electric motor (traction motor) Rear tires Power outlet^*2 (120 VAC) (if equipped) Front tires ^*1The energy flow is displayed while charging (How to charge). ^*2The energy flow is displayed when the accessory power outlet can be used. Note: Color of the hybrid battery (traction battery) on the center display It will be green when the hybrid battery (traction battery) is being charged, and yellow when the hybrid battery (traction battery) is being used. Remaining charge amount warning of hybrid battery (traction battery) The buzzer sounds intermittently when the hybrid battery (traction battery) remains without charging while the shift lever is in N, or the remaining charge amount drops below a certain level. If the remaining charge amount drops further, the buzzer sounds continuously. When a warning message is shown on the multi-information display and the buzzer sounds, follow the instructions displayed on the screen to perform troubleshooting. Color of the gasoline engine on the center display It will be blue when the engine is warming up, and it will turn to red when the warming up is finished. Consumption screen Display procedure Press from the main menu, then press “ Trip information”. Current fuel consumption screen If a screen other than current fuel consumption screen is displayed, press “ Current”. Use the displayed average fuel consumption as a reference. Some screens may vary depending on the type of multi-media display. The image is an example only, and may vary slightly from actual conditions. Resetting the consumption data Fuel consumption in the past 15 minutes Current fuel consumption Average vehicle speed since the hybrid system was started. Trip range Elapsed time since the hybrid system was started. History screen If a screen other than history screen is displayed, press “ History”. Use the displayed average fuel consumption as a reference. Some screens may vary depending on the type of multi-media display. The image is an example only, and may vary slightly from actual conditions. Latest fuel consumption Best recorded fuel consumption Previous fuel consumption record Resetting the history data Updating the latest fuel consumption data Note: Updating the history data Update the latest fuel consumption by pressing “ Update” to measure the current fuel consumption again. Resetting the data The fuel consumption data can be deleted by pressing “ Clear data”. Trip range Displays the estimated maximum distance that can be driven with the quantity of fuel remaining. This distance is computed based on your average fuel consumption. As a result, the actual distance that can be driven may differ from that displayed.