Head-up display^{* *}If equipped The head-up display projects a variety of driving-related information and the operating state of the driving support systems on the windshield. System components Illustrations used in this text are intended as examples, and may differ from the image that is actually displayed by the head-up display. Driving support system information/navigation system-linked display area (if equipped) (Driving support system information/navigation system-linked display area (if equipped)) Shift position display area/RSA (Road Sign Assist) display area (if equipped) (Hybrid transmission, RSA (Road Sign Assist)*) Vehicle speed display Hybrid System Indicator/tachometer (Hybrid System Indicator/Tachometer) Note: Head-up display will operate when The power switch is in ON. When using the head-up display The head-up display may seem dark or hard to see when viewed through sunglasses, especially polarized sunglasses. Adjust the brightness of the head-up display or remove your sunglasses. Street name display (vehicles with navigation system) Only street names which are included in the map data will be displayed. Warning: When using the head-up display Check that the position and brightness of the head-up display image does not interfere with safe driving. Incorrect adjustment of the image’s position or brightness may obstruct the driver’s view and lead to an accident, resulting in death or serious injury. Do not continuously look at the head-up display while driving as you may fail to see pedestrians, objects on the road, etc. ahead of the vehicle. Notice: Head-up display projector Do not place any drinks near the head-up display projector. If the projector gets wet, electrical malfunctions may result. Do not place anything on or put stickers onto the head-up display projector.Doing so could interrupt head-up display indications. Do not touch the inside of the head-up display projector or thrust sharp edges or the like into the projector. Doing so could cause mechanical malfunctions. Using the head-up display Vehicle settings and the content displayed on the head-up display can be changed by using the meter control switches. (Multi-information display (with 7-inch display) - Settings display, Multi-information display (with 12.3-inch display) - Settings display) Operate the meter control switches and select on the multi-information display. Operate or of the meter control switches and select “ HUD Main” to set up the following items. Enabling/disabling the head-up display Press to enable/disable the head-up display. Changing the head-up display settings Press and hold to display the setting screen and change the following settings: Brightness and vertical position of the head-up display Select to adjust the brightness or vertical position of the head-up display. Display content Select to change the display between the following: No content Hybrid System Indicator Tachometer Select to enable/disable the following items: Route guidance to destination (if equipped) Driving support system information display Compass (if equipped) Audio system operation status Display angle Select to adjust the angle of the head-up display. Note: Enabling/disabling of the head-up display If the head-up display is disabled, it will remain disabled when the power switch is turned off then back to ON. Display brightness The brightness of the head-up display can be adjusted on screen of the multi-information display. Also, it is automatically adjusted according to the ambient brightness. Warning: Caution for changing settings of the head-up display If the hybrid system is operating when changing the display settings, ensure that the vehicle is parked in a place with adequate ventilation. In a closed area such as a garage, exhaust gases including harmful carbon monoxide (CO) may collect and enter the vehicle. This may lead to death or a serious health hazard. Notice: When changing the settings of the head-up display To prevent 12-volt battery discharge, ensure that the hybrid system is operating while changing the settings of the head-up display. Driving support system information/navigation system-linked display area (if equipped) Driving support system information display Displays the operational status of the following systems: LTA (Lane Tracing Assist) (LTA (Lane Tracing Assist)) Dynamic radar cruise control with full-speed range (Dynamic radar cruise control with full-speed range) Displayed content is the same as that displayed on the multi-information display. For details, refer to the explanations of each system. Navigation system-linked display area (if equipped) Displays the following items which are linked to the navigation system: Street name Route guidance to destination Compass Pop-up display Pop-up displays for the following systems will be displayed when necessary: Driving support systems Displays a warning/suggestion/advice message or the operating state of a relevant system. PCS (Pre-Collision System) (PCS (Pre-Collision System)) Brake Override System (Restraining the hybrid system output (Brake Override System)) Drive-Start Control (Restraining the hybrid system output (Brake Override System)) Parking Support Brake function (static objects) (if equipped) (Parking Support Brake function (static objects)*) Displayed content is the same as that displayed on the meter. For details, refer to the explanations of each system. / icons Displays the following multi-information display linked icons: : Master warning icon Displayed when a warning message is displayed on the multi-information display. : Information icon Displayed when a suggestion/advice pop-up display is displayed on the multi-information display. Warning message Some warning messages are displayed when necessary, according to certain conditions. Displayed content is the same as that displayed on the multi-information display. For details, refer to the explanations of each system. Audio system operation status (if equipped) Displayed when an audio remote control switch on the steering wheel is operated. Hands-free system status (if equipped) Displayed when the hands-free system is operated. Outside temperature display Displayed when the power switch is turned to ON or when the low outside temperature indicator is flashing. Note: When a pop-up display is displayed When a pop-up display is displayed, a current display may no longer be displayed. In this case, the display will return after the pop-up display disappears. Outside temperature display When the ambient temperature is approximately 37°F (3°C) or lower, will flash for approximately 10 seconds and the outside temperature display will turn off. In the following situations, the correct outside temperature may not be displayed, or the display may take longer than normal to change: When stopped (including when using “ My Room Mode”), or driving at low speeds (less than 12 mph [20 km/h]) When the outside temperature has changed suddenly (at the entrance/exit of a garage, tunnel, etc.) When “ --” or “ E” is displayed, the system may be malfunctioning.Take your vehicle to your Toyota dealer. Hybrid System Indicator/Tachometer Display content selected by “ HUD Driving Support” on the screen is displayed. (Changing the head-up display settings) Hybrid System Indicator Charge area Hybrid Eco area Eco area Power area Displayed content is the same as that displayed on the multi-information display (Hybrid System Indicator). For details, refer to Hybrid System Indicator. Tachometer Displays the engine speed in revolutions per minute.