Gauges and meters (with 12.3-inch display)

Meter display

Outside temperature

Engine Tachometer

Tachometer

Fuel gauge

Fuel Fuel gauge

SpeedometerLocations of gauges and meters

The meter type can be changed on of the multi-information display. (Settings display)

Type 1/Type 2

The units of measure may differ depending on the intended destination of the vehicle.

Multi-information display

Presents the driver with a variety of vehicle data (Multi-information display (with 12.3-inch display))Displays warning messages if a malfunction occurs (If a warning message is displayed)

Outside temperature (Outside temperature display)

Analog meter (Type 2 only)

The dial type of analog meter can be changed on of the multi-information display. (Setting procedure)

Analog speedometer:

Displays the vehicle speed.

Hybrid System Indicator:

Displays the Hybrid System Indicator. (Hybrid System Indicator)

Digital speedometer

Displays the vehicle speed

Shift position and shift range

Displays the selected shift position or selected shift range (Selecting shift ranges in the D position (vehicles with paddle shift switches))

Clock

Automatically adjusts the time by using the GPS time information (GPS clock). For details, refer to “ MULTIMEDIA OWNER’S MANUAL”.

Widget (Audio system-linked display)

Displays the selected audio source or track on the meter. (Audio system-linked display)

While list of items for content display area (Setting procedure) is displayed, widget will not be displayed.

Distance to empty

Displays driving range with remaining fuel. (Distance to empty)

Fuel gauge

Displays the quantity of fuel remaining in the tank

In the following situations, the actual quantity of fuel remaining in the tank may not be displayed correctly. Refer to Manually updating the fuel gauge and possible driving range if the actual quantity of fuel remaining in the tank is not displayed correctly.

A small amount of fuel is added.

Fuel is added with the fuel gauge near or at “ F”.

The vehicle is stopped on an uneven surface, such as a slope.

The vehicle is driven on a slope or around a curve.

Widget (Power Consumption/Fuel Economy)

Displays power consumption/fuel economy information. (Power Consumption/Fuel Economy)

While list of items for content display area (Setting procedure) is displayed, widget will not be displayed.

SOC (State of Charge) gauge

Displays the amount of charge remaining in the traction battery. (SOC (State of Charge) gauge)

EV driving range

Displays the EV driving range with charge remaining in the hybrid battery (traction battery).

Odometer and trip meter display (Odometer and trip meter display)

Type 3

Hybrid System Indicator

Displays the Hybrid System Indicator. (Selecting shift ranges in the D position (vehicles with paddle shift switches))

Multi-information display

Presents the driver with a variety of vehicle data (Selecting shift ranges in the D position (vehicles with paddle shift switches))

Displays warning messages if a malfunction occurs (Selecting shift ranges in the D position (vehicles with paddle shift switches))

Outside temperature (Outside temperature display)

Digital speedometer

Displays the vehicle speed

Shift position and shift range

Displays the selected shift position or selected shift range (Selecting shift ranges in the D position (vehicles with paddle shift switches))

Clock

Automatically adjusts the time by using the GPS time information (GPS clock). For details, refer to “ MULTIMEDIA OWNER’S MANUAL”.

Analog speedometer

Displays the vehicle speed.

Distance to empty

Displays driving range with remaining fuel. (Selecting shift ranges in the D position (vehicles with paddle shift switches))

Fuel gauge

Displays the quantity of fuel remaining in the tank

A small amount of fuel is added.

Fuel is added with the fuel gauge near or at “ F”.

The vehicle is stopped on an uneven surface, such as a slope.

The vehicle is driven on a slope or around a curve.

SOC (State of Charge) gauge

Displays the amount of charge remaining in the traction battery. (SOC (State of Charge) gauge)

EV driving range

Displays the EV driving range with charge remaining in the hybrid battery (traction battery).

Odometer and trip meter display (Selecting shift ranges in the D position (vehicles with paddle shift switches))

Note:

The meters and display illuminate when

The power switch is in ON.

Engine speed

On hybrid vehicles, engine speed is precisely controlled in order to help improve fuel efficiency and reduce exhaust emissions etc.There are times when the engine speed that is displayed may differ even when vehicle operation and driving conditions are the same.

Meter Hybrid System Indicator

Hybrid System IndicatorHybrid System Indicator

Charge area

Shows regeneration^* status.

Regenerated energy will be used to charge the hybrid battery (traction battery).

Eco area

Shows that the vehicle is being driven in an Eco-friendly manner.

By keeping the bar display within Eco area, more Eco-friendly driving can be achieved.

Power area

Shows that an Eco-friendly driving range is being exceeded (during full power driving etc.)

Hybrid Eco area (HV mode)

Shows that gasoline engine power is not being used very often.

The gasoline engine will automatically stop and restart under various conditions.

EV driving area (EV mode or AUTO EV/HV mode)

Shows that the vehicle is driven using only the electric motor (traction motor).

When used in this manual, regeneration refers to the conversion of energy created by the movement of the vehicle into electrical energy.

Hybrid System Indicator is displayed when

The Hybrid System Indicator is displayed in the following situations:

The shift position is in D or S.

The hybrid system is started.

SOC (State of Charge) gauge

Displays the current amount of charge remaining in the traction battery.

The remaining battery for EV driving in EV mode is displayed in green, and the remaining battery used in HV mode is displayed in blue.

The amount of the remaining battery displayed decrease as the vehicle is driven and increase when the hybrid battery (traction battery) is charged, electrical energy is regenerated using the regenerative braking (Regenerative braking) or electricity is generated by the gasoline engine.

If the remaining battery is not displayed in green, HV mode is automatically selected and EV mode cannot be used. To enable EV driving, charge the hybrid battery (traction battery). (Charging equipment)

The hybrid battery (traction battery) is fully charged

The hybrid battery (traction battery) for EV mode is not remaining

Distance to empty

This distance is computed based on your average fuel consumption. As a result, the actual distance that can be driven may differ from that displayed.

When only a small amount of fuel is added to the tank, the display may not be updated. When refueling, turn the power switch off. If the vehicle is refueled without turning the power switch off, the display may not be updated.

When “ Refuel” is displayed, the remaining fuel amount is low and the distance that can be driven with the remaining fuel cannot be calculated. Refuel immediately.

EV driving range

When the air conditioning system is operating, is displayed next to the EV driving range and the EV driving range with the air conditioning system on is displayed.

The EV driving range may shorten even when not driving due to power consumption by the system.

For details, refer to “EV driving range” (EV driving range)

Manually updating the fuel gauge and possible driving range

The fuel gauge and the possible driving range are linked. If the displays of the fuel gauge and possible driving range do not update after adding a small amount of fuel, the displays can be updated by performing the following procedure.

Stop the vehicle on a level surface.

Press the “ ODO TRIP” switch to change the odometer and trip meter display to odometer.

Turn the power switch off.

While pressing and holding the “ ODO TRIP” switch, turn the power switch to ON.

Continue to hold the “ ODO TRIP” switch for approximately 5 seconds, and then release it once the odometer begins flashing.

Updating is complete once the odometer flashes for approximately 5 seconds and then the display returns to normal.

Outside temperature display

Displays the outside temperature within the range of -40°F (-40°C) to 140°F (60°C).

When the outside temperature is approximately 37°F (3°C) or lower, the indicator will flash for approximately 10 seconds, then stay on.

In the following situations, the correct outside temperature may not be displayed, or the display may take longer than normal to change:

When stopped, or driving at low speeds (less than 12 mph [20 km/h])

When the outside temperature has changed suddenly (at the entrance/exit of a garage, tunnel, etc.)

When “ --” or “ E” is displayed, the system may be malfunctioning. Take your vehicle to your Toyota dealer.

Liquid crystal display

Free/Open Source Software Information

This product contains Free/Open Source Software (FOSS). The license information and/or the source code of such FOSS can be found at the following URL.

https://www.denso.com/global/en/opensource/meter/toyota/

Customization

The gauges and meters can be customized on of the multi-information display. (Setting procedure)

Warning:

The information display at low temperatures

Allow the interior of the vehicle to warm up before using the liquid crystal information display. At extremely low temperatures, the information display monitor may respond slowly, and display changes may be delayed.

For example, there is a lag between the driver’s shifting and the new gear number appearing on the display. This lag could cause the driver to downshift again, causing rapid and excessive engine braking and possibly an accident resulting in death or injury.

Notice:

To prevent damage to the engine and its components

The engine may be overheating if “ Engine Coolant Temp High Stop in a Safe Place See Owner’s Manual” is shown on the multi-information display. In this case, immediately stop the vehicle in a safe place, and check the engine after it has cooled completely. (If your vehicle overheats)

Odometer

Trip metersOdometer and trip meter display

Odometer and trip meter display Display items Display items

Odometer

Displays the total distance the vehicle has been driven.

Trip meter A/trip meter B

Displays the distance the vehicle has been driven since the meter was last reset. Trip meters A and B can be used to record and display different distances independently.

Odometer and trip meter display “ODO TRIP” switch

“ODO TRIP” switch

Switches “ODO TRIP” switch Changing the display

Each time the “ ODO TRIP” switch is pressed, the displayed item will be changed. When the trip meter is displayed, pressing and holding the switch will reset the trip meter.

Instrument panel light control

The brightness of the instrument panel lights can be adjusted by turning the dial.

Brighter

Darker

Note:

Brightness of the meter lights (day mode and night mode)

The brightness of the meter lights can be adjusted individually.

In the following situations, the meters changes between day mode and night mode.

Day mode: When the tail lights are off or when the tail lights are on but the surrounding area is bright

Night mode: When the tail lights are on and the surrounding area is dark