Gauges and meters (with 7-inch display) The meters display various drive information. Hybrid system Hybrid System Indicator Meter display The display of the speedometer can be selected from two types, analog or digital. (Settings display) Analog speedometer The units used on the meter and display may differ depending on the target region. Hybrid System Indicator Displays the hybrid system output or regeneration level (Hybrid System Indicator) Speedometer Displays the vehicle speed Clock Automatically adjusts the time by using the GPS time information (GPS clock). For details, refer to “ MULTIMEDIA OWNER’S MANUAL”. Fuel gauge Displays the quantity of fuel remaining in the tank SOC (State of Charge) gauge Displays the amount of charge remaining in the traction battery. When the gauge is in the green zone, EV driving is possible. When the gauge is in the blue zone, EV driving is no longer possible (in this situation, the vehicle switches to HV mode). Charge the hybrid battery (traction battery) to allow EV driving. Odometer and trip meter Odometer:Displays the total distance that the vehicle has been driven Trip meter:Displays the distance the vehicle has been driven since the meter was last reset. Trip meters “A” and “B” can be used to record and display different distances independently. Outside temperature (Outside temperature display) Multi-information display Presents the driver with a variety of driving-related data (Multi-information display (with 7-inch display)) Displays warning messages if a malfunction occurs (If a warning message is displayed) Shift position and shift range indicator Displays the selected shift position or selected shift range (Hybrid transmission) Digital speedometer The units used on the meter and display may differ depending on the target region. Hybrid System Indicator Displays the hybrid system output or regeneration level (Hybrid System Indicator) Speedometer Displays the vehicle speed Clock Automatically adjusts the time by using the GPS time information (GPS clock). For details, refer to “ MULTIMEDIA OWNER’S MANUAL”. Fuel gauge Displays the quantity of fuel remaining in the tank SOC (State of Charge) gauge Displays the amount of charge remaining in the traction battery. When the gauge is in the green zone, EV driving is possible. When the gauge is in the blue zone, EV driving is no longer possible (in this situation, the vehicle switches to HV mode). Charge the hybrid battery (traction battery) to allow EV driving. Odometer and trip meter Odometer:Displays the total distance that the vehicle has been driven Trip meter:Displays the distance the vehicle has been driven since the meter was last reset. Trip meters “A” and “B” can be used to record and display different distances independently. Outside temperature (Outside temperature display) Multi-information display Presents the driver with a variety of driving-related data (Multi-information display (with 7-inch display)) Displays warning messages if a malfunction occurs (If a warning message is displayed) Shift position and shift range indicator Displays the selected shift position or selected shift range (Hybrid transmission) Note: The meters and display illuminate when The power switch is in ON. When changing driving mode Speedometer color is changed following the selected driving mode or when Trail Mode is turned on. (Driving mode select switch, Trail Mode) Meter Hybrid System Indicator Multi-information display Hybrid System Indicator Hybrid System Indicator The display contents of the Hybrid System Indicator are different in EV mode and HV mode. READY OFF area Shows that the hybrid system is not operating. Charge area Shows regeneration^* status. Regenerated energy will be used to charge the hybrid battery (traction battery). Eco area Shows that the vehicle is being driven in an Eco-friendly manner. By keeping the indicator needle within Eco area, more Eco-friendly driving can be achieved. Power area Shows that an Eco-friendly driving range is being exceeded (during full power driving etc.) EV driving area (EV mode or AUTO EV/HV mode) Shows that the vehicle is driven using only the electric motor (traction motor). Hybrid Eco area (HV mode) Shows that gasoline engine power is not being used very often. The gasoline engine will automatically stop and restart under various conditions. ^*When used in this manual, “regeneration” refers to the conversion of energy created by the movement of the vehicle into electrical energy. In the following situation, the Hybrid System Indicator does not operate. “ READY” indicator is not illuminated. The shift lever is in a range other than D or S. Outside temperature Outside temperature displayOutside temperature display In the following situations, the correct outside temperature may not be displayed, or the display may take longer than normal to change. When stopped (including when using “ My Room Mode”), or driving at low speeds (less than 12 mph [20 km/h]) When the outside temperature has changed suddenly (at the entrance/exit of a garage, tunnel, etc.) When “--” or “E” is displayed, the system may be malfunctioning.Take your vehicle to your Toyota dealer. Displays the outside temperature within the range of -40°F (-40°C) to 122°F (50°C). When the outside temperature is approximately 37°F (3°C) or lower, the indicator will flash for approximately 10 seconds, then stay on. Liquid crystal display Liquid crystal display Customization Settings (e. g. meter display) can be changed on the screen of the multi-information display. (Settings display) Warning: The information display at low temperatures Allow the interior of the vehicle to warm up before using the liquid crystal information display. At extremely low temperatures, the display monitor may respond slowly, and display changes may be delayed. For example, there is a lag between the driver’s shifting and the new shift range appearing on the display. This lag could cause the driver to downshift again, causing rapid and excessive engine braking and possibly an accident resulting in death or injury. Notice: To prevent damage to the engine and its components The engine may be overheating if “ Engine Coolant Temp High Stop in a Safe Place See Owner’s Manual” is shown on the multi-information display. In this case, immediately stop the vehicle in a safe place, and check the engine after it has cooled completely. (If your vehicle overheats) Odometer and trip meter display “ODO TRIP” switch Odometer and trip meter display Display items “ODO TRIP” switch Meter “ODO TRIP” switch Odometer “ODO TRIP” switch Switches “ODO TRIP” switch Using the “ODO TRIP” switch Switches the items of the odometer, trip meter A and trip meter B by pressing the “ODO TRIP” switch. When the trip meter is displayed, pressing and holding the switch will reset the trip meter. Brightness control Instrument panel light control Instrument panel light control Meter Instrument panel light control Instrument panel light control The brightness of the instrument panel lights can be adjusted by turning the dial. Brighter Darker Note: Instrument panel brightness adjustment The instrument panel brightness levels when the tail lights are on and off can be adjusted individually. However, when the surroundings are bright (daytime, etc.), turning on the tail lights will not change the instrument panel brightness.