Using the charging schedule function Charging can be carried out at the desired time by registering the charging schedule. Also, it is possible to set the charging schedule to one’s preferences, such as having charging complete by a certain departure time or be carried out at the same time on certain days. Note: Calendar settings The current date and time is automatically set using GPS. However, if the automatic setting of the clock is turned off on the Multimedia Display, it is necessary to set the calendar on the multi-information display (Multi-information display (with 7-inch display) - Settings display, Multi-information display (with 12.3-inch display) - Settings display). For details, refer to the “ MULTIMEDIA OWNER’S MANUAL”. If the calendar settings check screen is displayed when an attempt is made to register a charging schedule, make sure that the calendar settings are correctly. If the calendar is not set correctly, the charging schedule function will not operate properly. Settings of the charging schedule function When registering the charging schedule, the following settings can be changed. Select the charging mode One of the two following charging modes can be selected. “ Start” or “ Start at set time” Starts charging at the set time*1, 2 and finishes charging when fully charged. “ Departure” or “ Departure time” Starts charging to finish at the set time.*3, 4 When this setting is selected, the air conditioning-linked function can be used. *1There might be a slight error in the timing when charging starts due to the state of the hybrid battery (traction battery). *2Charging schedule function is performed in accordance with the clock. Before registering the charging schedule, check and set the clock to the proper time. *3If the system determines that charging cannot be completed by the set departure time, it will start charging. Check the charging schedule. *4If the outside temperature changes suddenly or the state of the power source being used is changed during charging, the system may not complete the charging as estimated. Repeated setting The periodic charging schedule can be set by selecting your desired day of the week. (If no days are selected, charging is only carried out once.) Air conditioning-linked setting (“ Climate Prep” or “ Climate preparation”) When the charging mode is set to “ Departure” or “ Departure time”, the vehicle air conditioning system (Automatic air conditioning system) can be set to automatically operate* according to the set time. By adjusting the cabin temperature in advance, passengers can enjoy a pleasant interior immediately after entering the vehicle. *Operation starts approximately 20 minutes before the set departure time. Turning “ Charge Now” on and off If even one charging schedule is registered, charging does not start until the set time, even if the AC charging cable is connected to the vehicle. To start charging without changing the charging schedule setting, turn “ Charge Now” on to temporarily cancel the charging schedule and enable charging after connecting the AC charging cable.* *If the charging connector is removed during charging while the charging schedule is registered and “ Charge Now” is on, “ Charge Now” turns off. Changing “ Next Event”*1, 2 It is possible to temporarily set the time of the next charging schedule without changing the registered repeated setting.*3 *1The “ Next Event” refers to the closest charging schedule from the current time among the registered charging schedules. Charging schedule is performed based on the “ Next Event”. *2“ Next Event” can not be changed on the Multimedia Display. *3When “ Next Event” is changed, the current charging schedule will be temporarily ignored and charging will not be carried out until the time specified by “ Next Event”. (For example, when “ Next Event” is set for 2 days later, even if items are registered on the charging schedule, charging will not be carried out until the time specified by “ Next Event”.) Registering the charging schedule The charging schedule can be registered on the multi-information display or Multimedia Display 7-inch multi-information display operation (if equipped): Setting operations on 7-inch multi-information display (if equipped) 12.3-inch multi-information display operation (if equipped): Setting operations on 12.3-inch multi-information display (if equipped) Multimedia Display operation: Setting operations on the Multimedia Display Note: Charging schedule The charging schedule cannot be set while driving. A maximum of 15 charging schedules can be registered. To make sure that the charging schedule function operates correctly Check the following items. The clock is adjusted to the proper time The calendar is set to the correct date Check that the power switch is turned off After registering the charging schedule, connect the AC charging cable The charging start time is determined based on the charging schedule at the time that the AC charging cable was connected. After connecting the AC charging cable, check that the charging indicator of the charging port flashes (Charging indicator) Do not use an outlet that has a power cut off function (including a timer function)Use an outlet that constantly supplies electricity. For outlets where the power is cut off due to a timer function, etc., charging may not be carried out according to plan if the power is cut off during the set time. The automatic adjustment of the clock by GPS is set to on. For details regarding setting clock, refer to the “ MULTIMEDIA OWNER’S MANUAL”. When the AC charging cable remains connected to the vehicle Even if multiple consecutive charging schedules are registered, the next charge will not be carried out according to the charging schedule until the AC charging cable is removed and reconnected after charging completes. Also, when the hybrid battery (traction battery) is fully charged, charging according to the charging schedule will not be carried out. “ Climate Prep” or “ Climate preparation” When the air conditioning-linked setting is turned on, the air conditioning operates until the set departure time. Therefore, the air conditioning will consume electricity and charging may not complete by the set departure time. If the hybrid battery (traction battery) is fully charged, charging will not be carried out, even if the charging schedule is set. However, if “ Climate Prep” or “ Climate preparation” is turned on, the air conditioning will operate only once when it nears the time set in “ Departure” or “ Departure time”. If this occurs, the air conditioning will consume electricity and the remaining charge of the hybrid battery (traction battery) when departing may be decreased. When the doors are unlocked, the air conditioning system does not operate. Smartphone-linked operation (if equipped) After applying to Toyota Apps, it is possible to use the smartphone application to change charging schedule settings. For details about Toyota Apps, refer to http://www.toyota.com/connectedservices in the United States and http://www.toyota.ca/connected in Canada. When charging schedules are ignored When the following operations are performed while the charging schedule is on standby, charging schedule is temporarily canceled and charging is started. When the Remote Air Conditioning System (Remote Air Conditioning System) is operated When turning “ My Room Mode” on (Using the “My Room Mode”) When turning “ Charge Now” on (Setting “Charge Now” to onOperation on “Charging Schedule” screenOperation on “Closing Display” screen*, Setting “Charge Now” to onOperation on “Charging Schedule” screenOperation on “Closing Display” screen, Turning “Charge Now” on) When an operation that temporarily cancels charging using the charging schedule is performed (If the charging indicator of the charging port flashes after connecting the AC charging cable) Effects of outside temperature When the charging mode is set to “ Departure” or “ Departure time”, charging schedule may be ignored due to the outside temperature and charging may start. “ Battery Heater” (“Battery Heater”) / “ Battery Cooler” (“Battery Cooler”) When charging is carried out using the charging schedule, the hybrid battery (traction battery) heating or cooling function may operate according to the temperature of the hybrid battery (traction battery). When the charging mode is set to “ Start” or “ Start at set time”, the function starts at the set charging start time. “ Battery Heater”: When the charging mode is set to “ Departure” or “ Departure time”, the function starts automatically to complete heating by the desired departure time. “ Battery Cooler”: When the charging mode is set to “ Departure” or “ Departure time”, cooling starts approximately 30 minutes before the charging start time. However, if there is no time to finish charging by the charging schedule, the hybrid battery (traction battery) cooling time may be shortened and “ Battery Cooler” may not operate. Setting operations on 7-inch multi-information display (if equipped) When operating charging schedule, use the meter control switches. Meter control switches (Changing the display) Multi-information display Registering the charging schedule Press or of the meter control switches to select . Press or of the meter control switches to select “ Vehicle Settings”, and then press and hold . Press or of the meter control switches to select “ Charging Settings”, and then press . The “ Charging Settings” screen will be displayed. Press or of the meter control switches to select “ Charging Schedule”, and then press . The “ Charging Schedule” screen will be displayed. Press or of the meter control switches to select “ Scheduled Events”, and then press . The “ Scheduled Events” screen will be displayed. Press or of the meter control switches to select “+”, and then press . The “ Charging Mode” screen will be displayed. Press or of the meter control switches to select the item to change with the cursor, and then press or to change the setting. Set the desired charging mode and charging start (or departure) time. When the charging mode is “ Start”, this sets the charging start time. When it is “ Departure”, this sets the charging end time. After changing the settings to the desired settings, press . When the charging mode is set to “ Departure”, the “ Climate Prep” screen is displayed. When the charging mode is set to “ Start”, the “ Repeat” screen (step 9) is displayed. When the charging mode is set to “ Departure”, set the “ Climate Prep” to on or off.* Press or of the meter control switches and select “ Yes” or “ No”, and then press . Select “ Yes” to turn on the air conditioning system and select “ No” to turn it off. The “ Repeat” screen will be displayed. *When the charging mode is set to “ Start”, “ Climate Prep” screen will not display. To activate the repeated setting, press or of the meter control switches to select the desired day to activate for the repeated setting, and then press . Each time is pressed, the repeated setting switches between on and off. When set to on, the charging schedule is repeated on that day. It is possible to set more than one day to on. If no days are set to on, charging is only carried out once according to the charging schedule for the next 24 hours. After changing the settings to the desired settings, select “ Done”, and then press . A screen where the settings can be saved will be displayed. Select “ Save” and press to save the settings. The settings will be saved. If you wish to change the settings, press and perform the setting procedure again. After setting operations are complete, when the AC charging cable is connected to the vehicle, charging will be carried out according to the charging schedule settings. Switching charging schedules between on and off The registered charging schedules can be turned on and off. Perform step 1 to 5 of the “Registering the charging schedule” procedure (Registering the charging schedule) and display “ Scheduled Events” screen. A list of the registered charging schedule will be displayed. Press or of the meter control switches to select the item to turn ON/OFF, and then press . Each time is pressed, the selected charging schedule switches between on and off. When set to off, a charging schedule is ignored and charging according to the charging schedule is not carried out. Changing the registered charging schedules The registered charging schedules can be modified or deleted. Perform step 1 to 5 of the “Registering the charging schedule” (Registering the charging schedule) procedure and display “ Scheduled Events” screen. A list of the registered charging schedule will be displayed. Press or of the meter control switches to select the item to change, and then press and hold . The “ Edit Event” screen will be displayed. Press or of the meter control switches to select the item to operate, press and perform the necessary operation. “ Edit” Change the desired settings as described starting from step 7 of the “Registering the charging schedule” procedure. (Registering the charging schedule) Press to return to the previous screen. “ Delete” A deletion confirmation screen will be displayed. Press or of the meter control switches to select “ Yes”, and then press to delete the selected charging schedule. To cancel deletion, select “ No” and then press . Press to return to the previous screen. Setting “ Charge Now” to on The “ Charge Now” setting can be changed by performing one of the two following procedures. Operation on “ Charging Schedule” screen Perform step 1 to 4 of the “Registering the charging schedule” procedure (Registering the charging schedule) and display “ Charging Schedule” screen. Press or of the meter control switches to select “ Charge Now”, and then press . Each time is pressed, “ Charge Now” switches between on and off. Operation on “ Closing Display” screen* *If “ Closing Display” is not set to “ Charging Schedule” on the screen of the multi-information display, the “ Closing Display” is not displayed. In this case, check the settings on the multi-information display. Turn the power switch off. The “ Closing Display” screen is displayed on the multi-information display. (When the power switch is turned off) Press to set “ Charge Now” to on. Each time is pressed, “ Charge Now” switches between on and off. After setting operations are complete, charging starts when the AC charging cable is connected. (How to charge) Changing “ Next Event”* *When “ Charge Now” is set to on or when using “ My Room Mode” (Using the “My Room Mode”) etc., it is not possible to change the registered “ Next Event”. Perform step 1 to 4 of the “Registering the charging schedule” procedure (Registering the charging schedule) and display “ Charging Schedule” screen. Press or of the meter control switches to select “ Next Event”, and then press . The “ Next Event” screen will be displayed. Press or of the meter control switches to select “ Yes”, and then press . The confirmation message will be displayed on the screen. Press , and the “ Charging Mode” screen will be displayed. Press to return to the previous screen. Change the desired settings as described starting from step 7 of the “Registering the charging schedule” procedure. (Registering the charging schedule) Press to return to the previous screen. Note: When charging schedule setting operations are canceled When the vehicle is in the following conditions, charging schedule setting operations are canceled. The power switch is operated before the settings are confirmed The vehicle starts off A display with a higher priority than that of the charging schedule setting is shown “ Next Event” After charging completes, the “ Next Event” displayed on the multi-information display will not change until the AC charging cable is removed, even after charging is performed according to the “ Next Event” schedule. To return to original setting after changing “ Next Event” setting Turning the setting of “ Charge Now” on and then off can return the setting of “ Next Event” to its original setting. When “ Next Event” is changed while charging When the charging mode is “ Departure”, the current charging is interrupted or continued depending on the remaining time until the charging is completed. When the charging mode is “ Start”, the current charging is interrupted, the next charging will start at the set time. When the power switch is turned off You can check the next charging schedule (“ Next Event”) on the “ Closing Display” screen* when “ Closing Display” is set to “ Charging Schedule” on screen of the multi-information display and the power switch is turned off. *0The “ Closing Display” screen may not be displayed during charging. Warning: Cautions while performing the setting operation When performing the setting operation while the hybrid system is operated, ensure that the vehicle is parked in a place with adequate ventilation. In a closed area such as a garage, exhaust gases including harmful carbon monoxide (CO) may collect and enter the vehicle. This may lead to death or a serious health hazard. Notice: While performing the setting operation When performing the setting operation while the hybrid system is stopped, be careful that the 12-volt battery will not be discharged. Setting operations on 12.3-inch multi-information display (if equipped) When operating charging schedule, use the meter control switches. Meter control switches (Changing the display) Multi-information display Registering the charging schedule Press and hold to display the cursor on the content display area (center) of the multi-information display. Press or of the meter control switches to select and then press . Press or of the meter control switches and select “ Vehicle Settings”. Then press and hold . Press or of the meter control switches to select “ Charging Settings”, and then press . The “ Charging Settings” screen will be displayed. Press or of the meter control switches to select “ Charging Schedule”, and then press . The “ Charging Schedule” screen will be displayed. Press or of the meter control switches to select “ Scheduled Events”, and then press . The “ Scheduled Events” screen will be displayed. Press or of the meter control switches to select “+”, and then press . The “ Charging Mode” screen will be displayed. Press or of the meter control switches to select the item to change with the cursor, and then press or to change the setting. Set the desired charging mode and charging start (or departure) time. When the charging mode is “ Start”, this sets the charging start time. When it is “ Departure”, this sets the charging end time. After changing the settings to the desired settings, press . When the charging mode is set to “ Departure”, the “ Climate Prep” screen is displayed. When the charging mode is set to “ Start”, the “ Repeat” screen (step 10) is displayed. When the charging mode is set to “ Departure”, set the “ Climate Prep” to on or off.* Press or of the meter control switches and select “ Yes” or “ No”, and then press . Select “ Yes” to turn on the air conditioning system and select “ No” to turn it off. The “ Repeat” screen will be displayed. *When the charging mode is set to “ Start”, “ Climate Prep” screen will not display. To activate the repeated setting, press or of the meter control switches to select the desired day to activate for the repeated setting, and then press . Each time is pressed, the repeated setting switches between on and off. When set to on, the charging schedule is repeated on that day. It is possible to set more than one day to on. If no days are set to on, charging is only carried out once according to the charging schedule for the next 24 hours. After changing the settings to the desired settings, select “ Done”, and then press . A screen where the settings can be saved will be displayed. Select “ Save” and press to save the settings. The settings will be saved. If you wish to change the settings, press and perform the setting procedure again. After setting operations are complete, when the AC charging cable is connected to the vehicle, charging will be carried out according to the charging schedule settings. Switching charging schedules between on and off The registered charging schedules can be turned on and off. Perform step 1 to 6 of the “Registering the charging schedule” procedure (Registering the charging schedule) and display “ Scheduled Events” screen. A list of the registered charging schedule will be displayed. Press or of the meter control switches to select the item to turn ON/OFF, and then press . Each time is pressed, the selected charging schedule switches between on and off. When set to off, a charging schedule is ignored and charging according to the charging schedule is not carried out. Changing the registered charging schedules The registered charging schedules can be modified or deleted. Perform step 1 to 6 of the “Registering the charging schedule” (Registering the charging schedule) procedure and display “ Scheduled Events” screen. A list of the registered charging schedule will be displayed. Press or of the meter control switches to select the item to change, and then press and hold . The “ Edit Event” screen will be displayed. Press or of the meter control switches to select the item to operate, press and perform the necessary operation. “ Edit” Change the desired settings as described starting from step 8 of the “Registering the charging schedule” procedure. (Registering the charging schedule) Press to return to the previous screen. “ Delete” A deletion confirmation screen will be displayed. Press or of the meter control switches to select “ Yes”, and then press to delete the selected charging schedule. To cancel deletion, select “ No” and then press . Press to return to the previous screen. Setting “ Charge Now” to on The “ Charge Now” setting can be changed by performing one of the two following procedures. Operation on “ Charging Schedule” screen Perform step 1 to 5 of the “Registering the charging schedule” procedure (Registering the charging schedule) and display “ Charging Schedule” screen. Press or of the meter control switches to select “ Charge Now”, and then press . Each time is pressed, “ Charge Now” switches between on and off. Operation on “ Closing Display” screen Turn the power switch off. The “ Closing Display” screen is displayed on the multi-information display. (When the power switch is turned off) Press to set “ Charge Now” to on. Each time is pressed, “ Charge Now” switches between on and off. After setting operations are complete, charging starts when the AC charging cable is connected. (How to charge) Changing “ Next Event”* *When “ Charge Now” is set to on or when using “ My Room Mode” (Using the “My Room Mode”) etc., it is not possible to change the registered “ Next Event”. Perform step 1 to 5 of the “Registering the charging schedule” procedure (Registering the charging schedule) and display “ Charging Schedule” screen. Press or of the meter control switches to select “ Next Event”, and then press . The “ Next Event” screen will be displayed. Press or of the meter control switches to select “ Yes”, and then press . The confirmation message will be displayed on the screen. Press , and the “ Charging Mode” screen will be displayed. Press to return to the previous screen. Change the desired settings as described starting from step 8 of the “Registering the charging schedule” procedure. (Registering the charging schedule) Press to return to the previous screen. Note: When charging schedule setting operations are canceled When the vehicle is in the following conditions, charging schedule setting operations are canceled. The power switch is operated before the settings are confirmed The vehicle starts off A display with a higher priority than that of the charging schedule setting is shown “ Next Event” After charging completes, the “ Next Event” displayed on the multi-information display will not change until the AC charging cable is removed, even after charging is performed according to the “ Next Event” schedule. To return to original setting after changing “ Next Event” setting Turning the setting of “ Charge Now” on and then off can return the setting of “ Next Event” to its original setting. When “ Next Event” is changed while charging When the charging mode is “ Departure”, the current charging is interrupted or continued depending on the remaining time until the charging is completed. When the charging mode is “ Start”, the current charging is interrupted, the next charging will start at the set time. When the power switch is turned off You can check the next charging schedule (“ Next Event”) on the “ Closing Display” screen* *0The “ Closing Display” screen may not be displayed during charging. Warning: Cautions while performing the setting operation When performing the setting operation while the hybrid system is operated, ensure that the vehicle is parked in a place with adequate ventilation. In a closed area such as a garage, exhaust gases including harmful carbon monoxide (CO) may collect and enter the vehicle. This may lead to death or a serious health hazard. Notice: While performing the setting operation When performing the setting operation while the hybrid system is stopped, be careful that the 12-volt battery will not be discharged. Setting operations on the Multimedia Display For details on how to operate the Multimedia Display, refer to “ MULTIMEDIA OWNER’S MANUAL”. Setting operations related to the charging schedule are performed on the “ Charging schedule” screen. The illustrations used in the text may differ from the images that are actually displayed on the Multimedia Display. Displaying the “ Charging schedule” screen Turn the power switch to ON and display the menu screen. Check that the “ IGNITION ON” is displayed on the multi-information display. When the power switch is in ACC, charging schedule setting operation can not be performed. Select and “ Charging schedule”, in that order. The “ Charging schedule” screen will be displayed. How to read the “ Charging schedule” screen Charging schedules (calendar display) Displays the week-long registered charging schedule in a list using icons. “ Add” button Press to add a new item to the charging schedule. (Registering the charging schedule) “ Edit” button Press to change or delete registered items on the charging schedule. (Switching charging schedules between on and off) “ Charge Now” button Each time the button is pressed, “ Charge Now” switches between on and off. (Turning “Charge Now” on) Return button Press to close the “ Charging schedule” screen. Main content displayed on the calendar:
Display Content
Gray line Current time
Green icon The charging mode is set to “ Departure time”
Blue icon The charging mode is set to “ Start at set time”
When “ Charge Now” is set to on, the blue icon will be displayed on the gray line. Registering the charging schedule Display the “ Charging schedule” screen. (Displaying the “Charging schedule” screen) Press “ Add”. The “ Add event” screen will be displayed on the screen. Select charging mode. Press “ Start at set time” or “ Departure time” to set the desired charging mode, and set the time by pressing buttons on the screen. When “ Start at set time” is selected: Set the charging start time (start time), then press “ OK”. When “ Departure time” is selected: Set the charging end time (departure time), then press “ OK”. When the charging mode is set to “ Departure time”, set the air conditioning-linked function to on or off. To operate the air conditioning system according to the departure time, press the “ Climate preparation” to set the function to on. Each time the button is pressed, the function switches between on and off. Select the desired day of the week to activate for the repeated setting, and then press “ OK”. The charging schedule will be repeated on the selected day. It is possible to select more than one day. If no days are selected, charging is only carried out once according to the charging schedule for the next 24 hours. After setting operations are complete, press “ Save”. The charging schedule is registered and an icon is added to the calendar. To cancel registration of the charging schedule, press “ X”. After setting operations are complete, when the power switch is turned off and the AC charging cable is connected to the vehicle, charging is carried out according to the charging schedule settings. Switching charging schedules between on and off Display the “ Charging schedule” screen. (Displaying the “Charging schedule” screen) Press “ Edit”. The “ Events” screen will be displayed on the screen. From the items displayed on the screen, press or in the row of the charging schedule you wish to change. If the charging schedule you wish to change is not displayed on the screen, scroll the list up and down to display it. Each time the button is pressed, the charging schedule switches between on and off. Changing the registered charging schedules Display the “ Charging schedule” screen. (Displaying the “Charging schedule” screen) Press “ Edit”. The “ Events” screen will be displayed on the screen. Press “ Edit” on the “ Events” screen. From the items displayed on the screen, press the charging schedule you want to change. The “ Edit events” screen will be displayed on the screen. It is also possible to display the “ Edit events” screen by pressing the icon of the charging schedule you want to change from those displayed on the calendar. Changing registered items: Change the desired settings as described in step 3 to step 5 of the “Registering the charging schedule” procedure. (Registering the charging schedule) When a setting is changed, its icon on the calendar also changes. Deleting registered items: Press “ Delete”. A deletion confirmation message will be displayed. Press “ Delete” to delete the selected charging schedule. To cancel deletion, press “ Cancel” or the return button. When a charging schedule is deleted, its icon is also deleted from the calendar. Turning “ Charge Now” on Display the “ Charging schedule” screen. (Displaying the “Charging schedule” screen) Press of “ Charge Now”. Each time the button is pressed, “ Charge Now” switches between on and off. After setting operations are complete, charging starts when the AC charging cable is connected. (How to charge) Note: When a charging schedule has been registered When all the items in the charging schedule are turned off, icons are not displayed on the “ Charging schedule” screen (calendar display). The icons will be displayed when they are set to on using the “ Events” screen. When charging schedule setting operations are canceled When the vehicle is in the following conditions, charging schedule setting operations are canceled. The power switch is turned off before the settings are confirmed The vehicle starts off A display with a higher priority than that of the charging schedule setting is shown Warning: Cautions while performing the setting operation As the hybrid system needs to be operating during setting up the display, ensure that the vehicle is parked in a place with adequate ventilation. In a closed area such as a garage, exhaust gases including harmful carbon monoxide (CO) may collect and enter the vehicle. This may lead to death or a serious health hazard. Notice: While performing the setting operation When performing the setting operation while the hybrid system is stopped, be careful that the 12-volt battery will not be discharged.