Plug-in hybrid system features

The plug-in hybrid system is a system excellent in both economical efficiency of electric vehicles and practicality of Plug-in Hybrid Electric Vehicles

EV driving can be performed using electricity charged from an external power source.^*

If the amount of electricity remaining in the hybrid battery (traction battery) becomes low, the vehicle is automatically controlled in such a way that it can be driven as a Plug-in Hybrid Electric Vehicle through the joint use of the gasoline engine.

The EV driving range will vary in accordance with conditions such as vehicle speed, the amount of charge remaining in the hybrid battery (traction battery) and the usage of the air conditioning system. The gasoline engine may also be used simultaneously in accordance with driving conditions.

Electric motor Location System components

The illustration is an example for explanation and may differ from the actual item.

Gasoline engine

Front electric motor (traction motor)

Rear electric motor (traction motor)

AUTO EV/HV mode

EV mode

HV mode

Plug-in hybrid system Hybrid battery (traction battery) charge mode

Plug-in hybrid system HV mode

Plug-in hybrid system EV mode

Plug-in hybrid system AUTO EV/HV mode Plug-in hybrid system operation mode

The plug-in hybrid system operates in the following modes.

The multi-information display can be used to check which mode the plug-in hybrid system is currently being driven in. (Multi-information display (with 7-inch display), Multi-information display (with 12.3-inch display))

EV mode

When a sufficient amount of electricity is remaining after charging^*1, EV driving is performed using electricity stored in the hybrid battery (traction battery).^*2

When in EV mode, the EV drive mode indicator illuminates.

^*1

The amount of remaining charge can be checked on the SOC (State of Charge) gauge. (Meter display)

^*2

Depending on the situation, EV driving may be canceled and both gasoline engine and electric motor are used. (Gasoline engine operation in EV mode or AUTO EV/HV mode)

AUTO EV/HV mode

Normally, the electricity stored in the hybrid battery (traction battery) is used for EV driving. However, when more power is required, such as for driving uphill or accelerating suddenly, the gasoline engine starts and provides powerful acceleration by strongly depressing the accelerator pedal.

When the vehicle is in a condition where EV driving is possible, EV mode and AUTO EV/HV mode can be switched by operating the switch. (Switching the plug-in hybrid system operation modesAUTO EV/HV mode switchEV/HV mode selection switch)

When in AUTO EV/HV mode, the AUTO EV/HV mode indicator illuminates.

HV mode

When in HV mode, the vehicle is driven using both the gasoline engine and electric motor. (When in HV mode)

If electricity needed for EV driving in EV mode or AUTO EV/HV mode is not remaining, the operation mode will be automatically switched to HV mode.

The operation mode can be switched to HV mode at any timing by operating the switch to keep electricity for EV driving etc. (Switching the plug-in hybrid system operation modesAUTO EV/HV mode switchEV/HV mode selection switch).^* Switching to HV mode when driving on a highway or when driving uphill is recommended in order to conserve battery power.

When in HV mode, the HV drive mode indicator illuminates.

The EV driving range may reduce even after switching to HV mode.

Hybrid battery (traction battery) charge mode (Switching to the hybrid battery (traction battery) charge mode)

Electricity generated in the gasoline engine can be charged in the hybrid battery (traction battery) by switching to the hybrid battery (traction battery) charge mode when electricity needed for EV driving is not remaining.^*

The system may not be able to switch to the hybrid battery (traction battery) charge mode due to the state of the plug-in hybrid system. (Hybrid battery (traction battery) charge mode)

Charging time differs depending on the driving state of the vehicle when driving in hybrid battery (traction battery) charge mode.

When in the hybrid battery (traction battery) charge mode, the hybrid battery charge mode indicator illuminates.

When in the hybrid battery (traction battery) charge mode, the hybrid battery can be charged while driving. However, the gasoline engine runs to charge the battery and fuel consumption becomes higher compared with driving in HV mode.

AUTO EV/HV mode switch

EV/HV mode selection switch

Plug-in hybrid system EV/HV mode selection switch

Plug-in hybrid system AUTO EV/HV mode switch

Switches EV/HV mode selection switch

Switches AUTO EV/HV mode switch Plug-in hybrid system operation mode selection switches

The plug-in hybrid system operation modes can be switched using the switches.

Switching the plug-in hybrid system operation modes

Press the AUTO EV/HV mode switch or EV/HV mode selection switch to change modes as the following table shows.

When in EV mode, the EV drive mode indicator illuminates.

When in AUTO EV/HV mode, the AUTO EV/HV mode indicator illuminates.

When in HV mode, the HV drive mode indicator illuminates.

AUTO EV/HV mode switch


Current mode	Mode after switching
EV mode	AUTO EV/HV mode
AUTO EV/HV mode	EV mode
HV mode	AUTO EV/HV mode^*

If there is not enough charge remaining in the hybrid battery (traction battery) to allow EV driving, AUTO EV/HV mode will not be selectable.

EV/HV mode selection switch


Current mode	Mode after switching
EV mode	HV mode
AUTO EV/HV mode	HV mode
HV mode	EV mode^*

If there is not enough charge remaining in the hybrid battery (traction battery) to allow EV driving, EV mode will not be selectable.

Hybrid battery (traction battery) charge modeSwitching to the hybrid battery (traction battery) charge mode

Press and hold the EV/HV mode selection switch.

Take your hand off the switch once the hybrid battery charge mode indicator starts to blink.

The hybrid battery charge mode indicator illuminates when the switch to hybrid battery (traction battery) charge mode is complete.

When the hybrid battery (traction battery) is sufficient charged^*, the hybrid battery (traction battery) charge mode is automatically canceled and the operation mode will be switched to HV mode.

The hybrid battery (traction battery) charge mode will be canceled by pressing AUTO EV/HV mode switch or EV/HV mode selection switch.

The maximum charge amount in the hybrid battery (traction battery) charge mode is approximately 80% of the sufficient charged capacity for the charging from an external power source.

Note:

If the plug-in hybrid system operation mode cannot be changed

In the following situations, the plug-in hybrid system operation mode cannot be changed even if the AUTO EV/HV mode switch or EV/HV mode selection switch is pressed. (In this case, the warning message is displayed on the multi-information display when the switch is pressed.)

When electricity needed for EV driving is not remaining (when in EV mode or AUTO EV/HV mode)

When the traction battery is almost completely charged (hybrid battery [traction battery] charge mode)

When switching from EV mode to another mode using the switch

When the power switch is turned off, operation mode switching is canceled and the system returns to EV mode the next time the vehicle is started.^*

If there is not enough charge remaining in the hybrid battery (traction battery) to allow EV driving, the system switches to HV mode.

Hybrid battery (traction battery) charge mode

The following may occur to protect the system, etc.

Cannot switch to hybrid battery (traction battery) charge mode or cannot cancel it

Gasoline engine does not start or stops even after switching to hybrid battery (traction battery) charge mode

If a load to the system is large, such as when the power consumption of the air conditioning system is large or when the temperature of the engine coolant is high, it may take longer time than usual to charge using the hybrid battery (traction battery) charge mode, or charging to the hybrid battery (traction battery) may not be performed.

Warning:

When using the hybrid battery (traction battery) charge mode

Observe the following precautions when using the hybrid battery (traction battery) charge mode while parking.

Failure to do so may lead to death or serious health hazard, as the gasoline engine operates when in the hybrid battery (traction battery) charge mode.

Do not stop the vehicle near flammable materials.

Do not use the hybrid battery (traction battery) charge mode in a closed area where ventilation is insufficient, such as in a garage or area with snow buildup.

Control when driving in each mode

When in EV mode

In EV mode, EV driving (driving using only the electric motor)^* is possible. However, depending on the situation, EV driving may be canceled and both gasoline engine and electric motor are used (Gasoline engine operation in EV mode or AUTO EV/HV mode). Also, if a little electricity is remaining in the hybrid battery (traction battery), HV mode is automatically selected. To drive in EV mode long, observe the followings.

Avoid sudden acceleration and sudden deceleration, and be sure to drive smoothly. If you repeatedly accelerate, the hybrid battery (traction battery) charge will deplete quickly. Also, EV driving may be canceled by rapid acceleration or vehicle speed.

Restrain your speed as much as possible. The distance that can be driven in EV mode will reduce considerably at high speeds.

The EV driving range can be checked using the multi-information display. (Gauges and meters (with 7-inch display) - Meter display, Gauges and meters (with 12.3-inch display) - Meter display)

When in AUTO EV/HV mode

Only the electric motor is used for EV driving^* during normal driving, but when the accelerator pedal is strongly depressed, the gasoline engine starts. (Gasoline engine operation in EV mode or AUTO EV/HV mode)

Also, when the hybrid battery (traction battery) level is low, the mode switches to HV mode automatically the same as in EV mode.

AUTO EV/HV mode is suitable for driving conditions when more power is required, such as for driving uphill or accelerating suddenly. However, because the gasoline engine will start more easily, it is recommended to drive in EV mode usually.

The EV driving range can be checked using the multi-information display. (Gauges and meters (with 7-inch display) - Meter display, Gauges and meters (with 12.3-inch display) - Meter display)

When in HV mode

The vehicle can be used in the same way as a standard Plug-in Hybrid Electric Vehicle

In HV mode, controls are primarily carried out as follows in accordance with the driving conditions.

The gasoline engine stops^* when the vehicle is stopped.

During start off, the electric motor (traction motor) drives the vehicle.

During normal driving, the gasoline engine and electric motor (traction motor) are controlled effectively, and the vehicle is driven with optimum fuel efficiency. Also, when necessary, the electric motor (traction motor) operates as an electrical generator to charge the hybrid battery (traction battery).

When the accelerator pedal is depressed heavily, drive force from both the gasoline engine and the electric motor (traction motor) is used to accelerate.

When the hybrid battery (traction battery) requires charging or the engine is warming up, etc., the gasoline engine will not automatically stop. (Conditions in which the gasoline engine may not stop)

When braking (regenerative braking)

The electric motor (traction motor) charges the hybrid battery (traction battery).

The EV driving range can be extended by actively using this regenerative braking to store electricity in the hybrid battery (traction battery).

Moreover, as fuel consumption is also reduced when in HV mode, the regenerative braking system can be used effectively.

Note:

Brake Regenerative braking

Hybrid system Regenerative braking

Regenerative brakingRegenerative braking

In the following situations, kinetic energy is converted to electric energy and deceleration force can be obtained in conjunction with the recharging of the hybrid battery (traction battery).

The accelerator pedal is released while driving with the shift lever in D or S.

The brake pedal is depressed while driving with the shift lever in D or S.

EV driving range

The EV driving range is displayed on the multi-information display. (Gauges and meters (with 7-inch display) - Meter display, Gauges and meters (with 12.3-inch display) - Meter display)

The EV driving range changes in accordance with the charge status of the hybrid battery (traction battery), the speed of the vehicle, etc.

Even if there is enough charge remaining in the hybrid battery (traction battery), EV driving may be canceled and both gasoline engine and electric motor are used depending on the situation. (Gasoline engine operation in EV mode or AUTO EV/HV mode)

EV indicator

The EV indicator comes on when the vehicle is driven using only the electric motor (traction motor) or the gasoline engine is stopped.

The on/off operation of the EV indicator can be changed. (Multi-information display (with 7-inch display) - Settings display, Multi-information display (with 12.3-inch display) - Settings display)

After EV mode has switched to HV mode due to low hybrid battery (traction battery) charge

If the hybrid battery (traction battery) is regenerated by driving continuously down a long slope, the EV driving range etc. will be displayed on the multi-information display and EV mode will be automatically switched to.

If EV mode is not switched to even though EV driving range is being displayed, EV mode can be switched to by pressing the EV/HV mode selection switch.

Gasoline engine operation in EV mode or AUTO EV/HV mode

Even if there is a sufficient amount of electricity remaining in the hybrid battery (traction battery) and EV driving range (Power Consumption/Fuel EconomyEV mode or AUTO EV/HV modeHV mode, Power Consumption/Fuel Economy) is being displayed on the multi-information display, EV driving (driving using only the electric motor) may be canceled and both gasoline engine and electric motor are used depending on the situation (EV driving will be returned to automatically after EV driving becomes possible again).

EV driving may be canceled automatically in the following circumstances^*1:

When vehicle speed is more than approximately 84 mph (135 km/h).

When power is needed temporarily, for example when the accelerator pedal is depressed firmly or when accelerating suddenly.^*2

When the temperature of the hybrid system is high. The vehicle has been left in the sun, driven on a hill, driven at high speeds, etc.

When the temperature of the hybrid system is low.

When the heater is switched on when the outside temperature is below about 14°F (-10°C).

When the windshield defogger switch is pressed. (Defogging the windshield)

When the system determines that the gasoline engine needs to be started.

^*1

The gasoline engine may also operate in circumstances other than those listed above, depending on conditions.

^*2

When driving in AUTO EV/HV mode. Even in EV mode, the gasoline engine may start, depending on the condition of the hybrid battery (traction battery).

If “ Engine Started to Protect System EV driving unavailable” is displayed on the multi-information display

EV driving may be canceled in order to protect the hybrid system, etc.

In this case, perform driving with the gasoline engine until EV driving will be returned to automatically.

Conditions in which the gasoline engine may not stop

The gasoline engine starts and stops automatically. However, it may not stop automatically in the following conditions^*:

During gasoline engine warm-up

During hybrid battery (traction battery) charging

When the temperature of the hybrid battery (traction battery) is high or low

When the windshield defogger switch is pressed. (Defogging the windshield)

Depending on the circumstances, the gasoline engine may also not stop automatically in situations other than those above.

Sounds and vibrations specific to a Plug-in Hybrid Electric Vehicle

There may be no engine sound or vibration even though the vehicle is able to move with the “ READY” indicator is illuminated. For safety, apply the parking brake and make sure to shift the shift lever to P when parked.

The following sounds or vibrations may occur when the hybrid system is operating and are not a malfunction.

Motor sounds may be heard from the engine compartment.

Sounds may be heard from the hybrid battery (traction battery) when the hybrid system starts or stops.

Relay operating sounds such as a snap or soft clank will be emitted from the hybrid battery (traction battery), under the rear seats or under the floor, when the hybrid system is started or stopped.

Sounds from the hybrid system may be heard when the back door is open.

Sounds may be heard from the transmission when the gasoline engine starts or stops, when driving at low speeds, or during idling.

Engine sounds may be heard when accelerating sharply.

Sounds may be heard due to regenerative braking when the brake pedal is depressed or as the accelerator pedal is released.

Vibration may be felt when the gasoline engine starts or stops.

Cooling fan sounds may be heard from the air intake vent under the rear seat. (DC/DC converter air intake vent)

Sounds may be heard from near the hybrid battery (traction battery) in accordance with the operation of the air conditioning system or battery cooler. (“Battery Cooler”)

Maintenance, repair, recycling, and disposal

Contact your Toyota dealer regarding maintenance, repair, recycling and disposal. Do not dispose of the vehicle yourself.

Charging (Charging equipment)

In order to make EV mode or AUTO EV/HV mode available, charge the hybrid battery (traction battery) from an external power source before using the vehicle.

Even if charging the hybrid battery (traction battery) has not been completed, the vehicle can be driven. However, if there is not enough charge remaining, it is possible that the vehicle cannot be driven in EV mode or AUTO EV/HV mode or the EV driving range will become shorter.

Note:

Refilling fuel

Plug-in Hybrid Electric Vehicles can be driven using electricity charged from an external power source. However, as the gasoline engine is used depending on the situation (Gasoline engine operation in EV mode or AUTO EV/HV mode) even if in EV mode or AUTO EV/HV mode, and the gasoline engine is provided on board as a power source for driving in HV mode, it is needed to refueling the vehicle.

Check the fuel amount and refill immediately when the fuel level becomes low. (Opening the fuel tank cap)

If the vehicle is not used for a long time

The 12-volt battery may discharge. In this event, charge the 12-volt battery. (If the 12-volt battery is discharged - If the 12-volt battery is discharged) In order to prevent the hybrid battery (traction battery) from becoming extremely low in charge, charge the hybrid battery (traction battery) from external power source or start the hybrid system at least once every 2 or 3 months, and turn the power switch off after the gasoline engine has stopped automatically. (If the gasoline engine does not start up even after approximately 10 seconds have passed since the “ READY” indicator came on, the power switch can be turned to off without any further action.) When the 12-volt battery is discharged, refer to If the 12-volt battery is discharged - If the 12-volt battery is discharged, “If the 12-volt battery is discharged” and perform the correction procedure.

When the vehicle is left with the AC charging cable connected, the electricity consumption amount of the 12-volt battery increases due to controls, such as the system checking, operating. When the AC charging cable is not needed, remove it from the vehicle.

Acoustic Vehicle Alerting System

Hybrid system Acoustic Vehicle Alerting System Acoustic Vehicle Alerting System

When driving with the gasoline engine stopped, a sound, which changes in accordance with the driving speed, will be played in order to warn people nearby of the vehicle’s approach. The sound will stop when the vehicle speed exceeds approximately 22 mph (35 km/h).

Note:

Acoustic Vehicle Alerting System

In the following cases, the Acoustic Vehicle Alerting System may be difficult for surrounding people to hear.

In very noisy areas

In the wind or the rain

Also, as the Acoustic Vehicle Alerting System is installed on the front of the vehicle, it may be more difficult to hear from the rear of the vehicle compared to the front.

When “ Acoustic Vehicle Alerting System Malfunction Visit your Dealer” is displayed on the multi-information display

The Acoustic Vehicle Alerting System may be malfunctioning. Have the vehicle inspected by your Toyota dealer immediately.

Predictive efficient drivePredictive efficient drive (if equipped)^*

This function can only be used in the mainland U.S.A. It cannot be used in other states and territories, including Alaska and Hawaii.

This system operates based on the driving situation and traffic information to enhance fuel economy.

For details about Predictive efficient drive, refer to “ MULTIMEDIA OWNER’S MANUAL”.

Predictive deceleration support

When the vehicle approaches to predictive deceleration support points registered in the navigation system, the reference operation range ( ) of the ECO Accelerator Guidance (ECO Accelerator Guidance/“Eco Score”ECO Accelerator Guidance“Eco Score”) on the multi-information display will be turned off to encourage the driver to reduce excessive acceleration.

With 7-in display:

With 12.3-in display:

The engine braking force will be increased according to the driving conditions to more efficiently charge the hybrid battery (traction battery) after the accelerator pedal is released.