Maintenance data (fuel, oil level, etc.) DimensionDimensions and weight
Overall length 194.9 in. (4950 mm)
Overall width 77.9 in. (1980 mm)*2, 3 79.9 in. (2030 mm)*4, 5
Overall height*1 73.2 in. (1860 mm)*2 73.6 in. (1870 mm)*3 74.2 in. (1885 mm)*4 75.8 in. (1925 mm)*5
Wheelbase 112.2 in. (2850 mm)
Front and rear tread 65.6 in. (1667 mm)*2, 3 78.8 in. (1747 mm)*4, 5
Vehicle capacity weight (Occupants + luggage) 895 lb. (405 kg)
*1Unladen vehicles *2265/55R20 tires with 8J wheels *3265/70R18 tires with 7 1/2J wheels *4For TRD Pro Grade *5For TRAILHUNTER Grade Seating capacitySeating capacity
Seating capacity 5 (Front 2, Rear 3)
Vehicle identification Vehicle identification number Identification Vehicle Vehicle identification number The vehicle identification number (VIN) is the legal identifier for your vehicle. This is the primary identification number for your Toyota. It is used in registering the ownership of your vehicle. This number is stamped on the front right frame. This number is also on the top left of the instrument panel. This number is also on the Certification Label. The engine number is stamped on the engine block as shown. EngineEngine
Model T24A-FTS
Type 4-cylinder in line, 4-cycle, gasoline (with turbocharger)
Bore and stroke 3.44 × 3.91 in. (87.5 × 99.5 mm)
Displacement 146.0 cu.in. (2393 cm3)
Valve clearance Automatic adjustment
Drive belt tension Automatic adjustment
Refueling Fuel types Refueling Capacity Fuel Type Fuel Capacity Fuel
Fuel type Unleaded gasoline only
Octane rating 87 (Research Octane Number 91) or higher
Fuel tank capacity(Reference) 19.0 gal. (72.0 L, 15.8 Imp.gal.)
Traction motor (electric motor) Specification Electric motor (traction motor)
Type Permanent magnet synchronous motor
Maximum output 36 kW
Maximum torque 184 ft•lbf (250 N•m, 25.5 kgf•m)
Traction battery (hybrid battery) Specification Hybrid battery (traction battery)
Type Nickel-Metal hydride battery
Voltage 7.2 V/module
Capacity 6.5 Ah
Quantity 40 modules
Nominal voltage 288 V
Oil Engine oil Engine oil Capacity Lubrication system Oil capacity (Drain and refill [Reference*])
With filter 5.9 qt. (5.6 L, 4.9 Imp.qt.)
Without filter 5.6 qt. (5.3 L, 4.7 Imp.qt.)
*The engine oil capacity is a reference quantity to be used when changing the engine oil. When actually adding the engine oil, make sure that the oil level is between the low leavel mark and refill upper limit mark (Adding engine oil). Warm up and turn off the engine, wait about 8 minutes, and check the oil level on the dipstick. Engine oil selection “ Toyota Genuine Motor Oil” is used in your Toyota vehicle. Use Toyota approved “ Toyota Genuine Motor Oil” or equivalent to satisfy the following grade and viscosity. Oil grade: ILSAC GF-6A multigrade engine oil Recommended viscosity: SAE 0W-20 Outside temperature SAE 0W-20 is the best choice for good fuel economy and good starting in cold weather. If SAE 0W-20 is not available, SAE 5W-20 oil may be used. However, it must be replaced with SAE 0W-20 at the next oil change. Oil viscosity (0W-20 is explained here as an example): The 0W in 0W-20 indicates the characteristic of the oil which allows cold startability. Oils with a lower value before the W allow for easier starting of the engine in cold weather. The 20 in 0W-20 indicates the viscosity characteristic of the oil when the oil is at high temperature. How to read oil container label: The International Lubricant Specification Advisory Committee (ILSAC) Certification Mark is added to some oil containers to help you select the oil you should use. Engine coolant Capacity Power control unit coolant Capacity Cooling system
Capacity* Gasoline engine 12.0 qt. (11.4 L, 10.0 Imp.qt.)
Power control unit 2.4 qt. (2.3 L, 2.0 Imp.qt.)
Coolant type Use either of the following: “ Toyota Super Long Life Coolant” Similar high-quality ethylene glycol-based non-silicate, non-amine, non-nitrite, and non-borate coolant with long-life hybrid organic acid technology Do not use plain water alone.
*The fluid capacity is a reference quantity.If replacement is necessary, contact your Toyota dealer. Spark plugIgnition system (spark plug)
Make NGK DILZKAR8E7H
Gap 0.027 in. (0.7 mm)
Notice: Iridium-tipped spark plugs Use only iridium-tipped spark plugs. Do not adjust the spark plug gap. Electrical system
Open voltage standard value at 68°F (20°C): 12.0 V or MoreIf the case the voltage is less than standard, charge battery.(Turn the power switch off and turn on the headlights (high beams) for 30 seconds.)
Charging rates 5 A max.
Fluid Automatic transmission Automatic transmission
Fluid capacity* 13.2 qt. (12.5 L, 11.0 Imp.qt.)
Fluid type Toyota Genuine ATF WS
*The fluid capacity is a reference quantity.If replacement is necessary, contact your Toyota dealer. Notice: Automatic transmission fluid type Using transmission fluid other than the above type may cause abnormal noise or vibration, or damage the transmission of your vehicle. Transfer Oil Transfer oil Transfer
Oil capacity Vehicles with part-time 4WD1.2 qt. (1.1 L, 1.0 Imp.qt.) Vehicles with full-time 4WD1.5 qt. (1.4 L, 1.2 Imp.qt.)
Oil type and viscosity Toyota Genuine Transfer gear oil LF or equivalent
Your Toyota vehicle is filled with “ Toyota Genuine Transfer Gear oil LF” at the factory.Use Toyota approved “ Toyota Genuine Transfer Gear oil LF” or an equivalent of matching quality to satisfy the above specification. Please contact your Toyota dealer for further details. Oil Differential oil DifferentialDifferential
Oil capacity Front Vehicles with part-time 4WD1.4 qt. (1.3 L, 1.1 Imp.qt.) Vehicles with full-time 4WD1.3 qt. (1.2 L, 1.1 Imp.qt.)
Rear Except for TRAILHUNTER Package5.9 qt. (5.6 L, 4.9 Imp.qt.) TRAILHUNTER Package6.9 qt. (6.5 L, 5.7 Imp.qt.)
Oil type and viscosity Toyota Genuine Differential Gear Oil LT 75W-85 GL-5 or equivalent
Your Toyota vehicle is filled with “ Toyota Genuine Differential Gear Oil” at the factory.Use Toyota approved “ Toyota Genuine Differential Gear Oil” or an equivalent oil of matching quality to satisfy the above specification. Please contact your Toyota dealer for further details. Fluid Brake Brake Fluid Brakes
Pedal clearance*1 5.0 in. (128 mm) Min.
Pedal free play 0.04 0.24 in. (1 6 mm)
Brake pad wear limit 0.04 in. (1 mm)
Parking brake indicator*2 When pulling the parking brake switch for 1 to 2 seconds: comes on When pushing the parking brake switch for 1 to 2 seconds: turns off
Fluid type FMVSS No.116 DOT 3 or SAE J1703 FMVSS No.116 DOT 4 or SAE J1704
*1Minimum pedal clearance when depressed with a force of 67 lbf (300 N, 31 kgf) while the hybrid system is operating. *2Make sure to confirm that the brake warning light (yellow) does not illuminate. (If the brake warning light illuminates, refer to Brake system warning light (warning buzzer).) Steering
Free play Less than 1.2 in. (30 mm)
Wheels Size Tires Size Tire inflation pressure Maintenance data Spare tire Inflation pressure Tires and wheels 18-inch tires (type A)
Tire size 265/70R18 116S
Tire inflation pressure(Recommended cold tire inflation pressure) 33 psi (230 kPa, 2.3 kgf/cm2 or bar)
Wheel size 18 7 1/2 J, 18 7 1/2 J (spare)
Wheel nut torque 97 ft•lbf (131 N•m, 13.4 kgf•m)
18-inch tires (type B)
Tire size 265/70R18 116H
Tire inflation pressure(Recommended cold tire inflation pressure) 33 psi (230 kPa, 2.3 kgf/cm2 or bar)
Wheel size 18 8 1/2 J, 18 8 1/2 J (spare)
Wheel nut torque 97 ft•lbf (131 N•m, 13.4 kgf•m)
20-inch tires (type A)
Tire size 265/55R20 113V
Tire inflation pressure(Recommended cold tire inflation pressure) 33 psi (230 kPa, 2.3 kgf/cm2 or bar)
Wheel size 20 8J, 20 8J (spare)
Wheel nut torque 97 ft•lbf (131 N•m, 13.4 kgf•m)
20-inch tires (type B)
Tire size 265/55R20 113V, 245/75R17 112S (spare)
Tire inflation pressure(Recommended cold tire inflation pressure) 33 psi (230 kPa, 2.3 kgf/cm2 or bar)
Wheel size 20 8J, 17 7J (spare)
Wheel nut torque Steel wheels:154 ft•lbf (209 N•m, 21.3 kgf•m) Aluminum wheels:97 ft•lbf (131 N•m, 13.4 kgf•m)
Lights Wattage Front turn signal/parking lights Wattage Light bulbs
Light bulbs Bulb No. W Type
Exterior Front turn signal/parking lights 7444NA 28/8 A
A: Wedge base bulbs (amber)