Tail lights
Light switchSwitches
Light switchesSide marker lights
Light switchParking lights
Light switchLights
Headlight switchLicense plate lights
Light switchHeadlights
Light switchHeadlight switchThe headlights can be operated manually or automatically.Operating instructionsOperating the
switch turns on the lights as follows:U.S.A.Canada The side marker, parking, tail, license plate, instrument panel lights, and daytime
running lights (Daytime running light system) turn on. The headlights and all lights listed above (except daytime running lights) turn on. The headlights, daytime running lights (Daytime running light system) and all the lights listed above turn on and off automatically. (if equipped) OffNote:AUTO mode can be used whenThe power switch is in ON.Daytime running light systemDaytime running light systemVehicles with bulb type front turn signal lights: The daytime running lights illuminate
using the same lights as the low beam headlights and illuminate dimmer than the low
beam headlights.Vehicles with LED type front turn signal lights: The daytime running
lights illuminate using the same lights as the parking lights and illuminate brighter
than the parking lights.To make your vehicle more visible to other drivers during daytime driving, the daytime
running lights turn on automatically when all of the following conditions are met.
(The daytime running lights are not designed for use at night.)The hybrid system is operatingThe parking brake is releasedThe headlight switch is in the
or
* position*When the surroundings are brightThe daytime running lights remain on after they illuminate, even if the parking brake
is set again.For the U.S.A.: Daytime running lights can be turned off by operating the switch.Compared to turning on the headlights, the daytime running light system offers greater
durability and consumes less electricity, so it can help improve fuel economy.Sensor
Automatic headlight systemAutomatic light control systemHeadlight control sensorThe sensor may not function properly if an object is placed on the sensor, or anything
that blocks the sensor is affixed to the windshield.Doing so interferes with the sensor
detecting the level of ambient light and may cause the automatic headlight system
to malfunction.Automatic light off systemWhen the headlights are on: The headlights and tail lights turn off 30 seconds after
the driver’s door is opened and closed if the power switch is turned to ACC or OFF.
(The lights turn off immediately if
on the key is pressed after all the doors are closed.)When only the tail lights are on: The tail lights turn off automatically if the power
switch is turned to ACC or OFF and the driver’s door is opened.To turn the lights on again, turn the power switch to ON, or turn the light switch
or
once and then back to
or
.Light reminder buzzerA buzzer sounds when the power switch is turned to ACC or OFF and the driver’s door
is opened while the lights are turned on.Lights
Welcome lightingWhen unlock the doors (welcome lamp) (If equipped)When the doors are unlocked using the entry function or wireless remote control, the
parking lights turn on automatically.When the light switch is in the
position and the surrounding area is dark, this function will operate.Windshield wiper linked headlight illuminationWhen driving during daytime with the headlight switch turned to
, if the windshield wipers are used, the headlights will turn on automatically after
several seconds to help enhance the visibility of your vehicle.12-volt battery-saving functionIn order to prevent the 12-volt battery of the vehicle from discharging, if the headlights
and/or tail lights are on when the power switch is turned to OFF the 12-volt battery-saving
function will operate and automatically turn off all the lights after approximately
20 minutes. When the power switch is turned to ON, the 12-volt battery-saving function
will be disabled. When any of the following are performed, the 12-volt battery-saving
function is canceled once and then reactivated. All the lights will turn off automatically
20 minutes after the 12-volt battery-saving function has been reactivated:When the headlight switch is operatedWhen a door is opened or closedCustomizationSome functions can be customized. (Automatic light control system)Notice:To prevent 12-volt battery dischargeDo not leave the lights on longer than necessary when the hybrid system is not operating.Turning on the high beam headlightsWith the headlights on, push the lever forward to turn on the high beams.Pull the lever back to the center position to turn the high beams off.Pull the lever toward you and release it to flash the high beams once.You can flash the high beams with the headlights on or off.Manual headlight leveling dialManual headlight leveling dialThe vehicle is equipped with manual leveling of the headlamps. The aim of the headlamps
can be adjusted by adjusting the dial settings based on your vehicle loading condition.It is recommended that the headlamps remain adjusted as close to “
0” position so not to interfere with other road users.Raises the level of the headlightsLowers the level of the headlightsGuide to dial settingsSingle projection lamp
