Using the power outlets (120VAC 1500W)* ^*If equipped This system allows the use of electrical devices with a total power consumption of 1500W at 120 VAC in the vehicle. Supplying power to electrical devices outside the vehicle is not recommended, as it may violate the laws and regulations of the country or region where it is used. When supplying power to electrical devices outside the vehicle, check the laws and regulations with the relevant local government of each country or region in advance. Also, be careful not to drag electrical devices and cords when moving the vehicle. Note: Power outlets With these power outlets, use devices which operate on 120 VAC and have a combined maximum power consumption of 1500 W or less. If a device is connected and the power consumption is exceeded, a protection circuit may be activated and the power supply function may be stopped. Some of the devices that consume a large amount of power, such as an electric grille, may require the exclusive use of the power outlets. When such a device is connected, do not connect other device(s) to the power outlets. When multiple devices are connected, depending on the device, a connected device may not operate properly. For such a device, use exclusively the power outlets. When a power outlet is being used, depending on the device to be used, the current flow may be high and the initial peak wattage may exceed 1500 W.In this situation, the protection function may activate and stop the power supply function. When a power outlet is being used, depending on the device to be used, it may cause interference with TV and radio broadcasts. While a power outlet is being used, a cooling fan sound may be heard from near a luggage compartment. This does not indicate a malfunction. Devices which may not operate correctly The following devices may not operate properly even if the combined power consumption is 1500 W or less: Devices with high initial peak wattage Devices requiring larger amount of power supply than the power consumption specified in its instruction manual Measuring devices that process precise data Devices that require an extremely stable power supply Devices that require a constant power supply from the power outlet, such as a device with a timer. Idling stop regulations The engine starts automatically and charging is performed when the remaining charge of the hybrid battery (traction battery) decreases, etc. Some local governments have regulations against starting the engine while parked or stopped. Use the power outlets appropriately after checking the regulations of the applicable local government. When the power outlets are used while the vehicle is parked or stopped The doors cannot be locked/unlocked using the smart key system. The doors cannot be locked/unlocked using an electronic key. The doors can only be locked/unlocked using a mechanical key. When a door is opened/closed, a buzzer may sound or “ Key Not Detected Check Key Location” may be displayed on the multi-information display. Check that an electronic key is carried with you. When the vehicle’s surroundings become dark while supplying power, the headlights etc. turn on automatically. Refer to Headlight switch for information about the lights. Warning: For safe use Observe the following precautions. Failure to do so may lead to an accident, resulting in death or serious injury. Do not allow children or other people not used to the operation to perform the power supply by themselves. Do not disconnect the plug of a device while your hands are wet or insert a pin or other object into the power outlet. Also, if a liquid or snow is on the power outlet, dry the outlet before using it. Do not attempt to modify, disassemble or repair a power outlet. For information on repairs, contact your Toyota dealer. Keep the power outlets free of dust and foreign matter. Also, make sure to clean the power outlets periodically. Hold the plug body to plug in/out of a power outlet. Do not touch the plug blades. Do not pull on a cord for unplugging, as otherwise the plug or cord may be damaged. Stop the use immediately if abnormal heat is observed on a cord or power outlet. To prevent the cord or power outlet from becoming hot, observe the following precautions: Do not connect 2 or more multi-point outlet adapters, such as dual adapters. When an extension cord reel is used, make sure to draw the whole cord out of the reel. If the device to be used has a ground wire, use a conversion adapter available on the market and connect the ground wire to the ground terminal of the conversion adapter. If the plug of a device fits loosely in a power outlet, even though it is fully inserted, replace the power outlet. For information on replacement, contact your Toyota dealer. Devices to be connected Make sure to read any instruction manual which came with a device and observe any warnings on the device. Do not connect a device to a power outlet if the device is malfunctioning or its plug is damaged. Otherwise, the device may be further malfunctioning, especially when the outside temperature is high or low. Devices requiring to be installed on a level place may not operate properly. Do not use devices, other than waterproof devices, in a place where water, such as rain, is splashed over or where it is humid. Do not use a device that has been or likely to have been merged in water or absorbed water within. Do not connect a medical device, as depending on the vehicle condition, the power supply function may be temporarily stopped. When the power outlets are used while the vehicle is parked or stopped The power outlets are designed to be connected to electric devices, such as lighting devices. Do not use them as a generator that supplies power to a house, etc. Also, when they are to be used on an emergency power supply device for homes, such as an exclusive device having connection to an external power source, or a device whose power supply circuit for external power source is separate from electric wiring of power companies, consult with the manufacturer or a retailer of the device. When using a power outlet, make sure to securely engage the parking brake and shift the shift position to P. Otherwise, the vehicle may move, possibly leading to an accident. When using a power outlet, do not move away from the vehicle. Do not perform power supply during weather when lightning may occur. Stop supplying power if lightning is observed during power supply. Do not use the power outlet if the vehicle has a vehicle cover installed. Do not use a power outlet when the vehicle is parked on a slanted place or a slope. When a power outlet is being used, do not move the vehicle or cause it to be inclined. Observe the following precautions when a connected cord is to be brought outside the vehicle: Take due care for not allowing rain to enter. If the power outlet is wet with raindrops, dry it before use. Prevent the cord from being caught in the window or door. Allow slack in a connected cord. Do not cause it to be extraordinary tense. Do not start off the vehicle by mistake. Do not refuel or wash the vehicle when using a power outlet. Make sure that the hood is closed. As the engine will start automatically depending on the condition of the vehicle, make sure that nothing is left near or contacting the exhaust pipes. Also, do not put your head or hands anywhere inside the engine compartment, as the cooling fan may operate suddenly. Keep hands and clothing (especially a tie, scarf, etc.) away from the fan as they may get caught in a fan. Do not stop the vehicle near objects which burn easily. If the exhaust system is extremely hot, it may cause a fire. Do not use in places where corrosive gases or fluids are generated. The gasoline engine starts automatically when the remaining charge of the hybrid battery (traction battery) decreases. When using a power outlet in an area with poor ventilation or an enclosed area, such as a garage or a place where snow has piled up, properly use an air intake and exhaust device to prevent lack of oxygen and fullness of exhaust gas. If such device cannot be used, do not use the power outlet. Use of a power outlet while driving In situations such as the following, do not use an electric device while driving. Also, do not use a device if it cannot be secured within the vehicle. When a device is likely to distract the driver and be a hindrance to safe driving, such as a TV, video/DVD player, etc. When an inadequately secured device is likely to fall over in case of sudden braking or an accident When a device is likely to cause fire if it falls or generates heat When a device is likely to cause burns, such as a toaster, microwave, electric heater, electric kettle, coffee maker, etc. When a device is likely to fall under the pedals and prevent the brake pedal from being depressed, such as a hair dryer, AC adapter, mouse, etc. Do not use devices which produce steam while the windows are closed. Doing so may cause the windows to fog up, reducing visibility and making it difficult to drive safely. Also, the steam may damage or negatively affect other devices. If the device must be used, stop the vehicle and open the windows before use. Notice: To avoid short circuit or malfunction Observe the following precautions. Failure to do so may lead to the power outlets not operating correctly or damage to the vehicle or a connected device. Do not set a toaster or other device which generates heat near the interior components or on a seat. Heat may cause these parts to melt or burn. Do not use devices which are sensitive to vibration or heat in the vehicle. These devices may malfunction due to vibration while driving or heat while the vehicle is parked in the sun. When not using a power outlet, make sure to close the lid. If foreign matter or a liquid enters the power outlet, it may cause a malfunction or short circuit. Using the power outlet while parked or stopped Water may leak from the exhaust pipe while the engine running if the power outlet is used for a long time. However, this is not a malfunction. At extremely low temperatures, water may freeze in the exhaust pipe and make it difficult to start the engine, or an odor may come from the exhaust pipe. In this case, stop using the power outlet, and then drive the vehicle for 15 to 30 minutes. Precautions for using the power outlets while parked Observe the following precautions before starting the power supply: Park the vehicle in a well-ventilated area, avoiding locations with poor ventilation such as garages, as the engine may start while the system is operating. Park the vehicle on a solid and level place. Block the wheels as needed. Check that the hood is closed. Check that the parking brake is engaged. Check that the shift position is in P. Check that the power switch is off. Note that the alarm system cannot be enabled during the Power supply. For theft prevention, do not leave valuable items, etc. in the cabin or luggage compartment. Names of parts AC 120 V switch Power switch (Power (ignition) switch) Power outlet Using the power outlets (1500 W) Check that the parking brake is engaged, securely depress the brake pedal and press the power switch (Starting the hybrid system). Check that the READY indicator is illuminated, and display the quick control screen. For details about quick control screen, refer to “ MULTIMEDIA OWNER’S MANUAL”. Touch “ AC 120V” switch. The power outlet is turned on/off each time “ AC 120V” is touched. Open the lid, and fully and securely insert the plug of the device into the power outlet. (Connecting a device) Stopping the use of the power outlets (1500 W) Follow the procedure described below: Turn the connected devices off. Display the quick control screen. For details about quick control screen, refer to “ MULTIMEDIA OWNER’S MANUAL”. Touch “ AC 120V” switch to turn it off. Disconnect each plug from the power outlet. Close the lid of the power outlet. Connecting a device When connecting a device Make sure to read the instruction manual which came with a device and observe warnings on the device. Before connecting the plug to the power outlet, check that the power of the electrical device is turned off. Open the lid, and fully and securely insert the plug of the device into the power outlet. Do not leave the plug halfway inserted. In the following situations, use cable extension, etc. and connect the plug securely to the power outlet: When the plug of a device is too large to allow it to be inserted fully and securely into the power outlet. When the plug of a device is heavy, possibly causing it to come off the power outlet. If the device to be used has a ground wire, use a conversion adapter available on the market and connect the ground wire to the ground terminal of the conversion adapter.