Parking Support Brake function (moving vehicles rear of the vehicle)* ^*If equipped If a rear side radar sensor detects a vehicle or bicycle approaching from the right or left at the rear of the vehicle and the system determines that the possibility of a collision is high, this function will perform brake control to reduce the likelihood of an impact with the approaching vehicle or bicycle. Examples of the function operation This function will operate in situations such as the following if a vehicle or bicycle is detected in the traveling direction of the vehicle. When reversing, a vehicle or bicycle is approaching and the brake pedal is not depressed, or is depressed late Types of sensors To ensure the system can operate properly Warning: To ensure the system can operate properly To ensure the system can operate properly If the Parking Support Brake function (moving vehicles rear of the vehicle) operates unnecessarily Depress the brake pedal immediately after the Parking Support Brake function (moving vehicles rear of the vehicle) operates. (Operation of the function is canceled by depressing the brake pedal.) Note: The Parking Support Brake function (moving vehicles rear of the vehicle) will operate when The function will operate when the PKSB OFF indicator is not illuminated (Warning lights and indicators) and all of the following conditions are met: Hybrid system output restriction control The Parking Support Brake is enabled. The vehicle speed is approximately 9 mph (15 km/h) or less. Vehicles or bicycles are approaching from the right or left at the rear of the vehicle at a traveling speed of approximately 5 mph (8 km/h) or more. The shift position is in R. The Parking Support Brake determines that a stronger than normal brake operation is necessary to avoid a collision with an approaching vehicle or bicycle from the rear side. Brake control Hybrid system output restriction control is operating. The Parking Support Brake determined that an emergency brake operation was necessary to avoid a collision with a vehicle or bicycle approaching from the rear side. The Parking Support Brake function (moving vehicles rear of the vehicle) will stop operating when The function will stop operating if any of the following conditions are met: Hybrid system output restriction control The Parking Support Brake is disabled. The collision becomes avoidable with normal brake operation. A vehicle or bicycle is no longer approaching from the right or left at the rear of the vehicle. Brake control The Parking Support Brake is disabled. Approximately 2 seconds have elapsed since the vehicle was stopped by brake control. The brake pedal is depressed after the vehicle is stopped by brake control. Situations in which the system may not operate properly Situations in which the system may not operate properly Situations in which the system may operate even if there is no possibility of a collision Situations in which the system may operate even if there is no possibility of a collision