Power (ignition) switch

Performing the following operations when carrying the electronic key on your person starts the hybrid system or changes power switch modes.

Smart key system Starting the hybrid system

Power switch Starting the hybrid system

Ignition switch (power switch) Starting the hybrid system

Hybrid system How to start the hybrid system

Hybrid system Starting the hybrid system

Smart key system indicator

“READY” indicatorStarting the hybrid system

Pull the parking brake switch to check that the parking brake is set. (Using the manual modeExcept for vehicles with electronically controlled type shift leverFor vehicles with electronically controlled type shift lever)

The parking brake indicator will come on.

Except for vehicles with electronically controlled type shift lever: Check that the shift position is set in P.

Firmly depress the brake pedal.

and a message will be displayed on the multi-information display.If it is not displayed, the hybrid system cannot be started.

Vehicles with electronically controlled type shift lever: When the shift position is N, the hybrid system cannot start. Shift the shift position to P when starting the hybrid system. (Shift position display and how to change the shift position)

Press the power switch shortly and firmly.

When operating the power switch, one short, firm press is enough. It is not necessary to press and hold the switch.

If the “ READY” indicator turns on, the hybrid system will operate normally.

Continue depressing the brake pedal until the “ READY” indicator is illuminated.

The hybrid system can be started from any power switch mode.

Check that the “ READY” indicator is illuminated.

The vehicle will not move when the “ READY” indicator is off.

Note:

Power switch illumination

According to the situation, the power switch illumination operates as follows.

When driver’s door or front passenger’s door is opened, the power switch illumination illuminates.

When the power switch is in OFF and depressing the brake pedal with carrying the electronic key on your person, the power switch illumination blinks.

When the power switch is in ACC or ON, the power switch illumination illuminates.

When the power switch mode is changed from ACC or ON to OFF, the power switch illumination illuminates for a certain amount of time.

If the hybrid system does not start

The immobilizer system may not have been deactivated. (Immobilizer system)Contact your Toyota dealer.

If a message related to start-up is shown on the multi-information display, read the message and follow the instructions.

If the door is unlocked with the mechanical key, the hybrid system cannot be started using the smart key system. Refer to Starting the hybrid system to start the hybrid system. However, if the electronic key is carried inside the vehicle and the doors are locked (Unlocking and locking the doors from the inside), the hybrid system can be started.

When the ambient temperature is low, such as during winter driving conditions

When starting the hybrid system, the flashing time of the “ READY” indicator may be long. Leave the vehicle as it is until the “ READY” indicator is steady on, as steady means the vehicle is able to move.

When the hybrid battery (traction battery) is extremely cold (below approximately -22°F [-30°C]) under the influence of the outside temperature, it may not be possible to start the hybrid system. In this case, try to start the hybrid system again after the temperature of the hybrid battery increases due to the outside temperature increase etc.

Sounds and vibrations specific to a Hybrid Electric Vehicle

If the 12-volt battery is discharged

The hybrid system cannot be started using the smart key system. Refer to Restarting the hybrid system to restart the hybrid system.

Electronic key battery depletion

Conditions affecting operation

Note for the entry function

When “ Smart key System Malfunction” is displayed on the multi-information display

The system may be malfunctioning. Have the vehicle inspected by your Toyota dealer immediately.

If the “ READY” indicator does not come on

In the event that the “ READY” indicator does not come on even after performing the proper procedures for starting the vehicle, contact your Toyota dealer immediately.

When “ Check Fuel Cap” is displayed on the multi-information display

When “Check Fuel Cap” is displayed on the multi-information display

If the hybrid system is malfunctioning

Hybrid warning message

Electronic key battery

Operation of the power switch

If the switch is not pressed shortly and firmly, the power switch mode may not change or the hybrid system may not start.

If attempting to restart the hybrid system immediately after turning the power switch to OFF, the hybrid system may not start in some cases. After turning the power switch to OFF, please wait a few seconds before restarting the hybrid system.

Customization

If the smart key system has been deactivated in a customized setting, refer to Customizable features.

Warning:

When starting the hybrid system

Always start the hybrid system while sitting in the driver’s seat. Do not depress the accelerator pedal while starting the hybrid system under any circumstances. Doing so may cause an accident resulting in death or serious injury.

Notice:

When starting the hybrid system

If the hybrid system becomes difficult to start, have your vehicle checked by your Toyota dealer immediately.

Symptoms indicating a malfunction with the power switch

If the power switch seems to be operating somewhat differently than usual, such as the switch sticking slightly, there may be a malfunction. Contact your Toyota dealer immediately.

Stopping the hybrid system

Except for vehicles with electronically controlled type shift lever

Stop the vehicle completely.

If the parking brake is in manual mode, set the parking brake. (Using the manual modeExcept for vehicles with electronically controlled type shift leverFor vehicles with electronically controlled type shift lever)

Check the parking brake indicator is illuminated.

Shift the shift position to P.

Do not press the shift release button after shifting the shift lever to P.

Press the power switch shortly and firmly.

The hybrid system will stop, and the meter display will be extinguished.

Release the brake pedal and check that “ ACCESSORY” or “ POWER ON” is not shown on the multi-information display.

Vehicles with electronically controlled type shift lever

Stop the vehicle completely.

Press the P position switch. (Shift position display and how to change the shift position)

Check that the shift position indicator shows P and the parking brake indicator is illuminated.

Press the power switch shortly and firmly.

The hybrid system will stop, and the meter display will be extinguished (the shift position indicator will be extinguished a few seconds after the meter display).

Release the brake pedal and check that “ ACCESSORY” or “ POWER ON” is not shown on the multi-information display.

Note:

When the shift control system malfunctions (Vehicles with electronically controlled type shift lever)

If the shift control system is malfunctioning, when attempting to turn the power switch off, it may not be able to be turned off. In this situation, it may be possible to turn the power switch off by applying the parking brake and then operating the power switch.

If there is a malfunction in the system, have the vehicle inspected by your Toyota dealer immediately.

Automatic hybrid system shut off feature

The vehicle is equipped with a feature that automatically shuts off the hybrid system when the shift lever is in P with the hybrid system operating for an extended period.

The hybrid system will automatically shut off after approximately 1 hour if it has been left running while the shift lever is in P.

The timer for the automatic hybrid system shut off feature will reset if the brake pedal is depressed or if the shift lever is in a position other than P.

After the vehicle is parked, if the door is locked with the door lock switch (Using the door lock switch) from the inside or the mechanical key (Locking and unlocking the doors) from the outside, the automatic hybrid system shut off feature will be disabled. The timer for the automatic hybrid system shut off feature will be re-enabled if the driver’s door is opened.

Warning:

Stopping the hybrid system in an emergency

If you want to stop the hybrid system in an emergency while driving the vehicle, press and hold the power switch for more than 2 seconds, or press it briefly 3 times or more in succession. (If your vehicle has to be stopped in an emergency)However, do not touch the power switch while driving except in an emergency. Turning the hybrid system off while driving will not cause a loss of steering or braking control. However, power assist for the steering wheel may be lost making it difficult to steer smoothly before stopping the vehicle depending on the remaining charge in the 12-volt battery or usage conditions. In this situation, you should pull over and stop the vehicle as soon as it is safe to do so.

If the power switch is operated while the vehicle is running, a warning message will be shown on the multi-information display and a buzzer sounds.

Except for vehicles with electronically controlled type shift lever: When restarting the hybrid system after an emergency shutdown, shift the shift position to N and press the power switch shortly and firmly.

Vehicles with electronically controlled type shift lever: When restarting the hybrid system after an emergency shutdown, shift the shift position in N and press the power switch shortly and firmly.

When parking

Exhaust gases include harmful carbon monoxide (CO), which is colorless and odorless. Observe the following precautions.

Failure to do so may cause exhaust gases to enter the vehicle and may lead to an accident caused by light-headedness, or may lead to death or a serious health hazard.

If the vehicle is in a poorly ventilated area or a closed area, such as a garage, stop the hybrid system.

Do not leave the vehicle with the hybrid system operating for a long time. If such a situation cannot be avoided, park the vehicle in an open space and ensure that exhaust fumes do not enter the vehicle interior.

Do not leave the hybrid system operating in an area with snow build-up, or where it is snowing. If snowbanks build up around the vehicle while the hybrid system is operating, exhaust gases may collect and enter the vehicle.

Power switch Changing the power switch modes

Ignition switch (power switch) Changing the power switch modes Changing power switch modes

Modes can be changed by pressing the power switch with the brake pedal released. (The mode changes each time the switch is pressed.)

“ ACCESSORY”

“ POWER ON”

OFF^*1

The emergency flashers can be used.

ACC^*2

Some electrical components such as the audio system can be used.

“ ACCESSORY” will be displayed on the multi-information display.

All electrical components can be used.

“ POWER ON” will be displayed on the multi-information display.

^*1

Except for vehicles with electronically controlled type shift lever: If the shift lever is in a position other than P or the shift release button is pressed when turning off the hybrid system, the power switch will remain ON, will not turn to OFF.

^*2

ACC mode can be enabled/disabled on the customize menu. (Customizable features)

Note:

When ACC customization is in on

With the power switch turned off, the multimedia system can still be used for a certain time until the battery saving function starts operating.

When the safe exit assist is operating, a buzzer will sound and a voice guidance will be given.

Power switch Auto power off function

Ignition switch (power switch) Auto power off function Auto power off function

Except for vehicles with electronically controlled type shift lever

If the vehicle is left in ACC or ON (the hybrid system is not operating) for more than 20 minutes with the shift lever is in P or the shift release button is not pressed, the power switch will automatically turn to OFF.

If the 12-volt battery is low with the shift lever is in P or the shift release button is not pressed, and the power switch is in ACC or ON (the hybrid system is not operating), a buzzer sounds and a message will be displayed on the multi-information display. If this continues, the power switch is automatically turn to OFF.

However, this function cannot entirely prevent the 12-volt battery discharge. Do not leave the vehicle with the power switch in ACC or ON for long periods of time when the hybrid system is not operating.

Vehicles with electronically controlled type shift lever

If the vehicle is left in ACC or ON (the hybrid system is not operating) for more than 20 minutes with the shift position in P, the power switch will automatically turn to OFF.

If the 12-volt battery is low with the shift position is in P and the power switch is in ACC or ON (the hybrid system is not operating), a buzzer sounds and a message will be displayed on the multi-information display. If this continues, the power switch is automatically turn to OFF.

Notice:

To prevent 12-volt battery discharge

Do not leave the power switch in ACC or ON for long periods of time without the hybrid system on.

If “ ACCESSORY” or “ POWER ON” is displayed on the multi-information display, the power switch is not in OFF. Exit the vehicle after turning the power switch to OFF.

When stopping the hybrid system with the shift lever in a position other than P (Except for vehicles with electronically controlled type shift lever)

If the hybrid system is stopped when the shift lever is in a position other than P or the shift release button is pressed, the power switch will not be turned to OFF. Perform the following procedure to turn the switch to OFF:

Check that the parking brake is set.

Shift the shift lever to P.

Do not press the shift release button after shifting the shift lever to P.

Check that “ POWER ON” is displayed on the multi-information display and press the power switch shortly and firmly.

Check that “ POWER ON” on the multi-information display is off.

Notice:

To prevent 12-volt battery discharge

Do not stop the hybrid system with the shift lever in a position other than P or the shift release button pressed. If the hybrid system is stopped with the shift lever in a position other than P or the shift release button pressed, the power switch will not be turned to OFF but instead remain ON. If the vehicle is left in ON, 12-volt battery discharge may occur.