Gauges and meters The meters display various drive information. Engine coolant temperature Fuel Fuel gauge Fuel gauge Odometer Speedometer Trip meters Meter Meters Meter display Tachometer Engine Tachometer Clock Meter Clock Outside temperature Engine coolant temperature Fuel Fuel gauge Fuel gauge SpeedometerLocations of gauges and meters The display type can be selected. (Settings display) Simple/1 dial/Navigation/Driving support system information/ECO The units of measure may differ depending on the intended destination of the vehicle. Multi-information display Presents the driver with a variety of vehicle data (Multi-information display)Displays warning messages if a malfunction occurs (Warning message display) Outside temperature (Outside temperature display) Analog meter (1 dial only) The dial type of analog meter can be changed on of the multi-information display. (Settings display) Analog speedometer: Displays the vehicle speed. Hybrid System Indicator: Displays the Hybrid System Indicator. (Hybrid System Indicator) Shift position and shift range^* (Driving - Shift position purpose and functions, Driving - Shift position purpose and functions) Digital speed meter^* Displays the vehicle speed Clock Automatically adjusts the time by using the GPS time information (GPS clock). For details, refer to “ MULTIMEDIA OWNER’S MANUAL”. Widget (Fuel Economy) Displays fuel economy information. (Fuel Economy) While list of items for content display area (Display contents) is displayed, widget will not be displayed. Distance to empty Displays driving range with remaining fuel. (Distance to empty) Fuel gauge Displays the quantity of fuel remaining in the tank. In the following situations, the actual quantity of fuel remaining in the tank may not be displayed correctly. Refer to Manually updating the fuel gauge and possible driving range if the actual quantity of fuel remaining in the tank is not displayed correctly. A small amount of fuel is added. Fuel is added with the fuel gauge near or at “ F”. The vehicle is stopped on an uneven surface, such as a slope. The vehicle is driven on a slope or around a curve. Engine coolant temperature gauge Displays the engine coolant temperature Odometer Displays the total distance the vehicle has been driven. Widget (Audio system-linked display) Displays the selected audio source or track on the meter. (Audio system-linked display) While list of items for content display area (Display contents) is displayed, widget will not be displayed. ^*The positions where information is displayed may vary depending on the selected screen, whether or not pop-up displays are shown, or other display conditions. 2 dials Hybrid System Indicator Displays the Hybrid System Indicator. (Hybrid System Indicator) Multi-information display Presents the driver with a variety of vehicle data (Multi-information display) Displays warning messages if a malfunction occurs (Warning message display) Outside temperature (Outside temperature display) Shift position and shift range^* (Driving - Shift position purpose and functions, Driving - Shift position purpose and functions) Digital speed meter^* Displays the vehicle speed. Clock Automatically adjusts the time by using the GPS time information (GPS clock). For details, refer to “ MULTIMEDIA OWNER’S MANUAL”. Analog speedometer Displays the vehicle speed. Distance to empty Displays driving range with remaining fuel. (Distance to empty) Fuel gauge Displays the quantity of fuel remaining in the tank. In the following situations, the actual quantity of fuel remaining in the tank may not be displayed correctly. Refer to Manually updating the fuel gauge and possible driving range if the actual quantity of fuel remaining in the tank is not displayed correctly. A small amount of fuel is added. Fuel is added with the fuel gauge near or at “ F”. The vehicle is stopped on an uneven surface, such as a slope. The vehicle is driven on a slope or around a curve. Engine coolant temperature gauge Displays the engine coolant temperature Odometer Displays the total distance the vehicle has been driven. ^*The positions where information is displayed may vary depending on the selected screen, whether or not pop-up displays are shown, or other display conditions. Note: The meters and display illuminate when The power switch is in ON. Meter Hybrid System Indicator Hybrid System IndicatorHybrid System Indicator Charge area Shows regeneration^* status. Regenerated energy will be used to charge the hybrid battery (traction battery). Eco area Shows that the vehicle is being driven in an Eco-friendly manner. By keeping the bar display within Eco area, more Eco-friendly driving can be achieved. Power area Shows that an Eco-friendly driving range is being exceeded (during full power driving etc.) Hybrid Eco area Shows that gasoline engine power is not being used very often. The gasoline engine will automatically stop and restart under various conditions. ^*When used in this manual, regeneration refers to the conversion of energy created by the movement of the vehicle into electrical energy. Hybrid System Indicator is displayed when The Hybrid System Indicator is displayed in the following situations: The shift position is in D or S. The hybrid system is started. Distance to empty This distance is computed based on your average fuel consumption. As a result, the actual distance that can be driven may differ from that displayed. When only a small amount of fuel is added to the tank, the display may not be updated. When refueling, turn the power switch off. If the vehicle is refueled without turning the power switch off, the display may not be updated. When “ Refuel” is displayed, the remaining fuel amount is low and the distance that can be driven with the remaining fuel cannot be calculated. Refuel immediately. Manually updating the fuel gauge and possible driving range The fuel gauge and the possible driving range are linked. If the displays of the fuel gauge and possible driving range do not update after adding a small amount of fuel, the displays can be updated by performing the following procedure. Stop the vehicle on a level surface. Turn the power switch off. While pressing and holding the switch, turn the power switch to ON. Continue to hold the switch for approximately 5 seconds, and then release it once the odometer begins flashing. Updating is complete once the odometer flashes for approximately 5 seconds and then the display returns to normal. Low outside temperature indicatorOutside temperature display Displays the outside temperature within the range of -40°F (-40°C) to 122°F (50°C). When the outside temperature is approximately 37°F (3°C) or lower, the indicator will flash for approximately 10 seconds, then stay on. In the following situations, the correct outside temperature may not be displayed, or the display may take longer than normal to change: When stopped, or driving at low speeds (less than 12 mph [20 km/h]) When the outside temperature has changed suddenly (at the entrance/exit of a garage, tunnel, etc.) When “ --” or “ E” is displayed, the system may be malfunctioning. Take your vehicle to your Toyota dealer. Liquid crystal display Liquid crystal display Customization The gauges and meters can be customized on of the multi-information display. (Settings display) Warning: The information display at low temperatures Allow the interior of the vehicle to warm up before using the liquid crystal information display. At extremely low temperatures, the information display monitor may respond slowly, and display changes may be delayed. For example, there is a lag between the driver’s shifting and the new gear number appearing on the display. This lag could cause the driver to downshift again, causing rapid and excessive engine braking and possibly an accident resulting in death or injury. Notice: To prevent damage to the engine and its components The engine may be overheating if the engine coolant temperature gauge is in the red zone (H). In this case, immediately stop the vehicle in a safe place, and check the engine after it has cooled completely. (If your vehicle overheats) Switches Instrument panel light control switches Meter Instrument panel light control Instrument panel light control Brightness control Instrument panel light control Changing the instrument panel light brightness The brightness of the instrument panel lights can be adjusted. Brighter Darker Note: Brightness of the meter lights (day mode and night mode) The brightness of the meter lights can be adjusted individually. In the following situations, the meters changes between day mode and night mode. Day mode: When the tail lights are off or when the tail lights are on but the surrounding area is bright Night mode: When the tail lights are on and the surrounding area is dark