Parking Support Brake function (static objects)^{* *}If equipped If the sensors detect a static object, such as a wall, in the traveling direction of the vehicle and the system determines that a collision may occur due to the vehicle suddenly moving forward due to an accidental accelerator pedal operation, the vehicle moving the unintended direction due to the wrong shift position being selected, or while parking or traveling at low speeds, the system will operate to lessen the impact with the detected static object and reduce the resulting damage. Examples of function operation This function will operate in situations such as the following if an object is detected in the traveling direction of the vehicle. When traveling at a low speed and the brake pedal is not depressed, or is depressed late When the accelerator pedal is depressed excessively When the vehicle moves in the unintended direction due to the wrong shift position being selected Types of sensors System components Warning: To ensure the system can operate properly To ensure the system can operate properly If the Parking Support Brake function (static objects) operates unnecessarily, such as at a railroad crossing If the Parking Support Brake has operated Notes when washing the vehicle Notes when washing the vehicle Note: The Parking Support Brake function (static object) will operate when The function will operate when the PKSB OFF indicator is not illuminated or flashing (Warning lights, Indicators) and all of the following conditions are met: Hybrid system output restriction control The Parking Support Brake is enabled. The vehicle speed is approximately 9 mph (15 km/h) or less. There is a static object in the traveling direction of the vehicle and approximately 6 to 13 ft. (2 to 4 m) away. The Parking Support Brake determines that a stronger-than-normal brake operation is necessary to avoid a collision. Brake control Hybrid system output restriction control is operating The Parking Support Brake determines that an immediate brake operation is necessary to avoid a collision. The Parking Support Brake function (static objects) will stop operating when The function will stop operating if any of the following conditions are met: Hybrid system output restriction control The Parking Support Brake is disabled. The system determines that the collision has become avoidable with normal brake operation. The static object is no longer approximately 6 to 13 ft. (2 to 4 m) away from the vehicle or in the traveling direction of the vehicle. Brake control The Parking Support Brake is disabled. Approximately 2 seconds have elapsed since the vehicle was stopped by brake control. The brake pedal is depressed after the vehicle is stopped by brake control. The static object is no longer approximately 6 to 13 ft. (2 to 4 m) away from the vehicle or in the traveling direction of the vehicle. Detection range of the Parking Support Brake function (static objects) The detection range of the Parking Support Brake function (static objects) differs from the detection range of the intuitive parking assist. (Sensor detection display, object distance) Therefore, even if the intuitive parking assist detects an object and provides a warning, the Parking Support Brake function (static objects) may not start operating. Situations in which the Parking Support Brake function (static objects) may not operate When the shift lever is in N Situations in which the system may not operate properly Situations in which the system may not operate properly Situations in which the system may operate even if there is no possibility of a collision Situations in which the system may operate even if there is no possibility of a collision