Gauges and meters (with 12.3-inch multi-information display) The meters display various drive information. Meter display Tachometer Engine Tachometer Outside temperature Meter Clock Clock Speedometer Fuel gauge Fuel Fuel gauge Engine coolant temperatureLocations of gauges and meters The meter type can be changed on of the multi-information display. (Settings display) Type 1/Type 2 The units of measure may differ depending on the intended destination of the vehicle. Multi-information display Presents the driver with a variety of vehicle data (Multi-information display (with 12.3-inch multi-information display))Displays warning messages if a malfunction occurs (If a warning message is displayed) Outside temperature (Outside temperature display) Analog meter (Type 2 only) The dial type of analog meter can be changed on of the multi-information display. (Settings display) Analog speedometer: Displays the vehicle speed. Hybrid System Indicator: Displays the Hybrid System Indicator. (Hybrid System Indicator) Digital speedometer Displays the vehicle speed Shift position and shift range Displays the selected shift position or selected shift range (Hybrid transmission) Clock Automatically adjusts the time by using the GPS time information (GPS clock). For details, refer to “ MULTIMEDIAOWNER’S MANUAL”. Widget (Audio system-linked display) Displays selection of an audio source or track on the meter. (Audio system-linked display) If contents list is displayed on the multi-information display, widget will not be displayed. (Items displayed in the content display area) Distance to empty Displays driving range with remaining fuel. (Distance to empty) Fuel gauge Displays the quantity of fuel remaining in the tank. In the following situations, the actual quantity of fuel remaining in the tank may not be displayed correctly. Refer to Manually updating the fuel gauge and possible driving range if the actual quantity of fuel remaining in the tank is not displayed correctly. A small amount of fuel is added. Fuel is added with the fuel gauge near or at “ F”. The vehicle is stopped on an uneven surface, such as a slope. The vehicle is driven on a slope or around a curve. Widget (Fuel Economy) Displays fuel economy information. (Fuel Economy) If contents list is displayed on the multi-information display, widget will not be displayed. (Items displayed in the content display area) Engine coolant temperature gauge Displays the engine coolant temperature Odometer and trip meter display (Odometer and trip meter display) Type 3 Hybrid System Indicator Displays the Hybrid System Indicator. (Hybrid System Indicator) Multi-information display Presents the driver with a variety of vehicle data (Multi-information display (with 12.3-inch multi-information display)) Displays warning messages if a malfunction occurs (If a warning message is displayed) Outside temperature (Outside temperature display) Digital speedometer Displays the vehicle speed Shift position and shift range Displays the selected shift position or selected shift range (Hybrid transmission) Clock Automatically adjusts the time by using the GPS time information (GPS clock). For details, refer to “ MULTIMEDIAOWNER’S MANUAL”. Analog speedometer Displays the vehicle speed. Distance to empty Displays driving range with remaining fuel. (Distance to empty) Fuel gauge Displays the quantity of fuel remaining in the tank. In the following situations, the actual quantity of fuel remaining in the tank may not be displayed correctly. Refer to Manually updating the fuel gauge and possible driving range if the actual quantity of fuel remaining in the tank is not displayed correctly. A small amount of fuel is added. Fuel is added with the fuel gauge near or at “ F”. The vehicle is stopped on an uneven surface, such as a slope. The vehicle is driven on a slope or around a curve. Engine coolant temperature gauge Displays the engine coolant temperature Odometer and trip meter display (Odometer and trip meter display) Note: The meters and display illuminate when The power switch is in ON. Engine speed On hybrid vehicles, engine speed is precisely controlled in order to help improve fuel efficiency and reduce exhaust emissions etc.There are times when the engine speed that is displayed may differ even when vehicle operation and driving conditions are the same. Meter Hybrid System Indicator Hybrid System IndicatorHybrid System Indicator Charge area Shows regeneration^* status. Regenerated energy will be used to charge the hybrid battery (traction battery). Eco area Shows that the vehicle is being driven in an Eco-friendly manner. By keeping the bar display within Eco area, more Eco-friendly driving can be achieved. Power area Shows that an Eco-friendly driving range is being exceeded (during full power driving etc.) Hybrid Eco area Shows that gasoline engine power is not being used very often. The gasoline engine will automatically stop and restart under various conditions. ^*When used in this manual, regeneration refers to the conversion of energy created by the movement of the vehicle into electrical energy. Hybrid System Indicator is displayed when The Hybrid System Indicator is displayed in the following situations: The shift position is in D or S. The hybrid system is started. Distance to empty This distance is computed based on your average fuel consumption. As a result, the actual distance that can be driven may differ from that displayed. When only a small amount of fuel is added to the tank, the display may not be updated. When refueling, turn the power switch off. If the vehicle is refueled without turning the power switch off, the display may not be updated. When “ Refuel” is displayed, the remaining fuel amount is low and the distance that can be driven with the remaining fuel cannot be calculated. Refuel immediately. Manually updating the fuel gauge and possible driving range The fuel gauge and the possible driving range are linked. If the displays of the fuel gauge and possible driving range do not update after adding a small amount of fuel, the displays can be updated by performing the following procedure. Stop the vehicle on a level surface. Press the “ ODO TRIP” switch to change the odometer and trip meter display to odometer. Turn the power switch off. While pressing and holding the “ ODO TRIP” switch, turn the power switch to ON. Continue to hold the “ ODO TRIP” switch for approximately 5 seconds, and then release it once the odometer begins flashing. Updating is complete once the odometer flashes for approximately 5 seconds and then the display returns to normal. Outside temperature display Displays the outside temperature within the range of -40°F (-40°C) to 122°F (50°C). When the outside temperature is approximately 37°F (3°C) or lower, the indicator will flash for approximately 10 seconds, then stay on. In the following situations, the correct outside temperature may not be displayed, or the display may take longer than normal to change: When stopped, or driving at low speeds (less than 12 mph [20 km/h]) When the outside temperature has changed suddenly (at the entrance/exit of a garage, tunnel, etc.) When “ --” or “ E” is displayed, the system may be malfunctioning. Take your vehicle to your Toyota dealer. Free/Open Source Software Information This product contains Free/Open Source Software (FOSS). The license information and/or the source code of such FOSS can be found at the following URL. https://www.denso.com/global/en/opens ource/meter/toyota/ Liquid crystal display Liquid crystal display Customization The gauges and meters can be customized on of the multi-information display. (Setting procedure) Warning: The information display at low temperatures Allow the interior of the vehicle to warm up before using the liquid crystal information display. At extremely low temperatures, the information display monitor may respond slowly, and display changes may be delayed. For example, there is a lag between the driver’s shifting and the new gear number appearing on the display. This lag could cause the driver to downshift again, causing rapid and excessive engine braking and possibly an accident resulting in death or injury. Notice: To prevent damage to the engine and its components The engine may be overheating if the engine coolant temperature gauge is in the red zone (H). In this case, immediately stop the vehicle in a safe place, and check the engine after it has cooled completely. (If your vehicle overheats) Trip meters OdometerOdometer and trip meter display Odometer and trip meter display Display items Display items Odometer Displays the total distance the vehicle has been driven. Trip meter A/trip meter B Displays the distance the vehicle has been driven since the meter was last reset. Trip meters A and B can be used to record and display different distances independently. Distance until next engine oil change Displays the distance the vehicle can be driven until an oil change is necessary. Switches “ODO TRIP” switch Odometer and trip meter display “ODO TRIP” switch “ODO TRIP” switchChanging the display Each time the “ ODO TRIP” switch is pressed, the displayed item will be changed. When the trip meter is displayed, pressing and holding the switch will reset the trip meter. Switches Instrument panel light control switches Meter Instrument panel light control Instrument panel light control Brightness control Instrument panel light control Changing the instrument panel light brightness The brightness of the instrument panel lights can be adjusted. Brighter Darker Note: Brightness of the meter lights (day mode and night mode) The brightness of the meter lights can be adjusted individually. In the following situations, the meters changes between day mode and night mode. Day mode: When the tail lights are off or when the tail lights are on but the surrounding area is bright Night mode: When the tail lights are on and the surrounding area is dark