Multi-information display (with 12.3-inch multi-information display) The multi-information display is used to display fuel efficiency related information and various types of driving-related information. The multi-information display can also be used to change the display settings and other settings. Multi-information display Display contents Display contents Following information is displayed on the multi-information display. Content display area (left) Content display area (center) Content display area (right) Driving support system information display area When driving information support system is displayed on the content display area, the system operating state will not be displayed in this area. RSA (Road Sign Assist) display area (if equipped) (RSA (Road Sign Assist)*) Content display area (center) Driving support system information display (Driving support system information display) Settings display (Settings display) Warning message display Content display area (center) Fuel Economy (Fuel Economy) Eco Driving Indicator (Eco Driving Indicator) Driving support system information display (Driving support system information display) Navigation system-linked information display (if equipped) (Navigation system-linked display (if equipped)) Audio system-linked display (Audio system-linked display) Drive information (Driving information display) AWD operation status display (if equipped) (AWD system display (AWD models)) Note: The multi-information display is displayed when The engine switch is in ON. When changing driving mode Background color of the multi-information display is changed following the selected driving mode. (Driving mode select switch) Liquid crystal display Small spots or light spots may appear on the display. This phenomenon is characteristic of liquid crystal displays, and there is no problem continuing to use the display. Warning: Caution for use while driving When operating the multi-information display while driving, pay extra attention to the safety of the area around the vehicle. Do not look continuously at the multi-information display while driving as you may fail to see pedestrians, objects on the road, etc. ahead of the vehicle. The information display at low temperatures The information display at low temperatures Switches Meter control switches Steering wheel Meter control switches Multi-information display Meter control switches Meter control switches Meter Meter control switches Meter control switches / : Change the screen and move the cursor / : Change displayed content and scroll up/down the screen Press: Enter/SetPress and hold: Reset/Display customizable items/Display the cursor Move the main meter and return to the previous screen Call sending/receiving and history display Linked with the hands-free system, sending or receiving call is displayed. For details regarding the hands-free system, refer to the “ MULTIMEDIA OWNER’S MANUAL”. Multi-information display Changing the display Changing the display The multi-information display is operated using the meter control switches. Changing the meter display type setting The meter display type setting can be changed on . (Settings display) Changing the screen Select items from the combination of 3 screens to display on each 3 content display areas.Press or of the meter control switches to scroll the screen. Changing the display contents Switches items displayed on each contents display area (left/center/right). Press and hold to display the cursor on the content display area (center). Press or to move the cursor and select the content display area. Press or to select the items. Items displayed in the content display area Select to enable/disable items on the content display area (left/right). Press and hold to display the cursor on the content display area (center). Press or to move the cursor and select the content display area. Contents display area (left): Press to display contents list.Contents display area (right): Press to display contents list. Press or to select the items. Press to select enable/disable items. Warning: Caution for use while driving For safety, avoid operating the meter control switches while driving as much as possible, and do not look continuously at the multi-information display while driving. Stop the vehicle and operate the meter control switches. Failure to do so may cause a steering wheel operation error, resulting in an unexpected accident. Multi-information display Eco Driving Indicator Fuel consumption information Average fuel economy Current fuel economy Average fuel economyFuel Economy Current fuel economy Displays the driving range with remaining fuel. Average fuel economy Displays the average fuel economy since the function was reset or the average fuel economy after starting or refueling.^{*1, 2, 3}The average fuel economy selected by “ Fuel Economy” on the screen is displayed. ^*1Use the displayed fuel consumption as a reference only. ^*2Average fuel economy after starting is reset each time the engine stops. ^*3Average fuel economy since the function was reset can be reset by pressing and holding . Eco Driving Indicator Light Eco Driving IndicatorEco Driving Indicator Eco Driving Indicator Light During Eco-friendly acceleration operation (Eco driving), the Eco Driving Indicator Light will turn on. When the acceleration exceeds Zone of Eco driving, or when the vehicle is stopped, the light turns off. Eco Driving Indicator Zone Display Suggests the Zone of Eco driving with current Eco driving ratio based on acceleration. Eco driving ratio based on acceleration If the acceleration exceeds Zone of Eco driving, the right side of Eco Driving Indicator Zone Display will illuminate.At this time, the Eco Driving Indicator Light will turn off. Zone of Eco driving Note: The ECO Driving indicator will not operate when Eco Driving Indicator will not operate in the following conditions: The shift lever is in any position other than D. Neither normal mode nor Eco drive mode is selected. The vehicle speed is approximately 80 mph (130 km/h) or higher. Multi-information display Driving support system information display Driving support system information displayDriving support system information display Select to display the operational status of the following systems: LTA (Lane Tracing Assist) (LTA (Lane Tracing Assist)) RSA (Road Sign Assist)^* (RSA (Road Sign Assist)*) Dynamic radar cruise control with full-speed range (Dynamic radar cruise control with full-speed range) ^*If equipped Navigation system-linked display (if equipped) Select to display the following navigation system-linked information. Route guidance to destination Street name Compass Audio system-linked display Select to enable selection of an audio source or track on the meter Multi-information display Driving information display Driving information display Display Driving information Driving information display Drive information 2 items that are selected using the “ Drive Info Items” setting (average speed and distance) can be displayed vertically. Use the displayed information as a reference only. “ Average Speed”: Displays the average vehicle speed since engine start^* “ Distance”: Displays the distance driven since engine start^* “ Total Time”: Displays elapsed time since engine start^{* *}These items are reset each time the engine stops. Trip information 2 items that are selected using the “ TRIP A Items” or “ TRIP B Items” setting (average speed and distance) can be displayed vertically. Use the displayed information as a reference only. “ Average Speed”: Displays the average vehicle speed since the display was reset^* “ Distance”: Displays the distance driven since the display was reset^* “ Total Time”: Displays elapsed time since the display was reset^{* *}To reset, display the desired item and press and hold . AWD system display (AWD models) Torque distribution display Displays the drive status of each wheel in 6 steps from 0 to 5. The illustration used is intended as an example, and may differ from the image that is actually displayed on the multi-information display. Settings display Vehicle settings and the content displayed on the screen can be changed by using the meter control switches. Setting procedure Press and hold to display the cursor on the content display area (center). Press or with the cursor on the content display area (center) to select and then press . Press or of the meter control switches and move the cursor to select the item for changing settings. If the function is turned on and off or the volume, etc. is changed on the setting screen, the setting is changed each time is pressed .For functions that allow operation contents, display contents, etc., of function to be selected, the setting screen is displayed by pressing and holding . When the setting screen is displayed, select the setting or desired value (time, etc.) with . After changing the settings, press of the meter control switches. LTA (Lane Tracing Assist) (LTA (Lane Tracing Assist)) Select to set up the following items. “ Lane Center” Select to enable/disable the lane centering function. “ Sensitivity” Select to set the lane departure alert sensitivity. “ Sway Warning” Select to enable/disable the vehicle sway warning. “ Sway Sensitivity” Select to set the vehicle sway warning sensitivity. BSM (Blind Spot Monitor) (if equipped) (BSM (Blind Spot Monitor)*) Select to set up the following items. BSM (Blind Spot Monitor) on/offSelect to enable/disable the BSM system. “ Sensitivity”Select to change the alert timing for an approaching vehicle. “ Brightness”Select to switch the brightness of the outside rear view mirror indicators. (System components) PCS (Pre-Collision System) (PCS (Pre-Collision System)) Select to set up the following items. PCS on/offSelect to enable/disable the pre-collision system. “ Sensitivity”Select to change the pre-collision warning timing. (Intuitive parking assist) (if equipped) (Intuitive parking assist*) Select to set up the following items. Intuitive parking assist on/offSelect to enable/disable the Intuitive parking assist. “ Volume”Select to set the volume of the buzzer which sounds when the Intuitive parking assist is operated. RCTA (Rear Cross Traffic Alert) (if equipped) (RCTA (Rear Cross Traffic Alert) function*) Select to set up the following items. RCTA (Rear Cross Traffic Alert) on/offSelect to enable/disable the RCTA system. “ Volume”Select to set the volume of the buzzer which sounds when the RCTA system is operated. PKSB (Parking Support Brake System) (if equipped) (PKSB (Parking Support Brake)*) Select to enable/disable the Parking Support Brake function. RSA (Road Sign Assist) (if equipped) (RSA (Road Sign Assist)*) Select to set up the following items. Road Sign Assist on/offSelect to enable/disable the RSA system. “ Notification Method”Select to change each notification method used to notify the driver when the system recognizes excess speed and Do Not Enter sign. “ Notification Level”Select to change each notification level used to notify the driver when the system recognizes a speed limit sign. Vehicle Settings PBD (Power Back Door) (if equipped) (Changing settings of the power back door system (vehicles with power back door)) Select to set up the following items. System settingsSelect to enable/disable the power back door system. “ Hands Free”^*Select to enable/disable the Hands Free Power Back Door. “ Opening Adjustment”Select the open position when power back door is fully open. “ Volume”Select to set the volume of the buzzer which sounds when the power back door system operates. ^*Vehicles with Hands Free Power Back Door Stop & Start system (if equipped) (Stop & Start system*) Select to set the length of time the Stop & Start system will operate when the “ A/C” switch of the air conditioning system is on. “ Scheduled Maintenance” (Resetting the message indicating maintenance is required (with 7-inch display)) Select to reset the scheduled maintenance information (message indicating maintenance is required and distance until the next maintenance) after all maintenance is performed. Rear Seat Reminder (Resetting the message indicating maintenance is required (with 7-inch display))Select to enable/disable the rear seat reminder function. “ TPWS” (Tire Pressure Warning System) (Initializing the tire pressure warning system (if equipped)) “ Set Pressure”Select to initialize the tire pressure warning system. “ Change Wheel”Select to change the tire pressure warning system sensor ID code set. To enable this function, a second set of tire pressure warning system sensor ID codes must be registered by a Toyota dealer. For information regarding changing the registered ID code set, contact your Toyota dealer. Settings “ Language”Select to change the language on the multi-information display. “ Units”Select to change the unit of measure for fuel consumption. Meter TypeSelect to change the meter type setting. Meter StyleSelect to change the meter style. Dial TypeSelect to change dial type. (Locations of gauges and metersType 1/Type 2Type 3) (Eco Driving Indicator Light) (Eco Driving Indicator/Distance to emptyDisplay contentsEco Driving Indicator) Select to activate/deactivate the Eco Driving Indicator Light. Fuel EconomySelect to change the display on Fuel Economy. (Multi-information display (with 12.3-inch multi-information display)) Drive InfoSelect to change displayed items on drive information display. (Driving information display) Pop-Up DisplaySelect to enable/disable the pop-up displays, which may appear in some situations. Default SettingsSelect to reset the meter display settings. Note: Suspension of the settings display In the following situations, operation of the settings display will be temporarily suspended. When a warning message appears on the multi-information display When the vehicle begins to move Settings for functions not equipped to the vehicle are not displayed. When a function is turned off, the related settings for that function are not selectable. Warning: Cautions during setting up the display As the engine needs to be running during setting up the display, ensure that the vehicle is parked in a place with adequate ventilation. In a closed area such as a garage, exhaust gases including harmful carbon monoxide (CO) may collect and enter the vehicle. This may lead to death or a serious health hazard. Notice: During setting up the display To prevent battery discharge, ensure that the engine is running while setting up the display features. Meter Warning messages Warning message display Select to display warning messages and measures to be taken if a malfunction is detected. (If a warning message is displayed) Convenience Services (Suggestion function) Displays suggestions to the driver in the following situations. To select a response to a displayed suggestion, use the meter control switches. Suggestion to turn off the headlights If the headlights are left on for a certain amount of time after the engine switch has been turned off, a suggestion message will be displayed. When the headlight switch is in the AUTO position: The message asking if you wish to turn the headlights off is displayed. To turn the headlights off, select “ Yes”. If the driver’s door is opened after the engine switch is turned off, this suggestion message will not be displayed. Note: Customization Convenience Services (Suggestion function) can be turned on/off. (Customizable features: Customizing vehicle features)