Gauges and meters (with 7-inch multi-information display) The meters display various drive information. Meter Clock Engine Tachometer Meter display The display of the speedometer can be selected from two types, analog or digital. (Settings display) Analog speedometer The units used on the meter and display may differ depending on the target region. Tachometer Displays the engine speed in revolutions per minute Speedometer Displays the vehicle speed Clock Automatically adjusts the time by using the GPS time information (GPS clock). For details, refer to “ MULTIMEDIA OWNER’S MANUAL”. Fuel gauge Displays the quantity of fuel remaining in the tank. In the following situations, the actual quantity of fuel remaining in the tank may not be displayed correctly. Refer to Manually updating the fuel gauge and possible driving range if the actual quantity of fuel remaining in the tank is not displayed correctly. A small amount of fuel is added. Fuel is added with the fuel gauge near or at “ F”. The vehicle is stopped on an uneven surface, such as a slope. The vehicle is driven on a slope or around a curve. Engine coolant temperature gauge Displays the engine coolant temperature Odometer and trip meter Odometer:Displays the total distance that the vehicle has been driven Trip meter:Displays the distance the vehicle has been driven since the meter was last reset. Trip meters “A” and “B” can be used to record and display different distances independently. Outside temperature (Outside temperature display) Multi-information display Presents the driver with a variety of driving-related data (Multi-information display (with 7-inch multi-information display)) Displays warning messages if a malfunction occurs (If a warning message is displayed) Shift position and shift range indicator Displays the selected shift position or selected shift range (Automatic transmission) Digital speedometer The units used on the meter and display may differ depending on the target region. Tachometer Displays the engine speed in revolutions per minute Speedometer Displays the vehicle speed Clock Automatically adjusts the time by using the GPS time information (GPS clock). For details, refer to “ MULTIMEDIA OWNER’S MANUAL”. Fuel gauge Displays the quantity of fuel remaining in the tank. In the following situations, the actual quantity of fuel remaining in the tank may not be displayed correctly. Refer to Manually updating the fuel gauge and possible driving range if the actual quantity of fuel remaining in the tank is not displayed correctly. A small amount of fuel is added. Fuel is added with the fuel gauge near or at “ F”. The vehicle is stopped on an uneven surface, such as a slope. The vehicle is driven on a slope or around a curve. Engine coolant temperature gauge Displays the engine coolant temperature Odometer and trip meter Odometer:Displays the total distance that the vehicle has been driven Trip meter:Displays the distance the vehicle has been driven since the meter was last reset. Trip meters “A” and “B” can be used to record and display different distances independently. Outside temperature (Outside temperature display) Multi-information display Presents the driver with a variety of driving-related data (Multi-information display (with 7-inch multi-information display)) Displays warning messages if a malfunction occurs (If a warning message is displayed) Shift position and shift range indicator Displays the selected shift position or selected shift range (Automatic transmission) Note: The meters and display illuminate when The engine switch is in ON. When changing driving mode Speedometer color is changed following the selected driving mode. (Driving mode select switch) AWD models: Speedometer color is changed following the selected driving mode or Multi-terrain Select mode. (Driving mode select switch, Multi-terrain Select (AWD vehicles)) Manually updating the fuel gauge and possible driving range The fuel gauge and the possible driving range are linked. If the displays of the fuel gauge and possible driving range do not update after adding a small amount of fuel, the displays can be updated by performing the following procedure. Stop the vehicle on a level surface. Press the “ ODO TRIP” switch to change the odometer and trip meter display to odometer. Turn the engine switch off. While pressing and holding the “ ODO TRIP” switch, turn the engine switch to ON. Continue to hold the “ ODO TRIP” switch for approximately 5 seconds, and then release it once the odometer begins flashing. Updating is complete once the odometer flashes for approximately 5 seconds and then the display returns to normal. Outside temperature displayOutside temperature display In the following situations, the correct outside temperature may not be displayed, or the display may take longer than normal to change. When stopped, or driving at low speeds (less than 12 mph [20 km/h]) When the outside temperature has changed suddenly (at the entrance/exit of a garage, tunnel, etc.) When “ --” or “ E” is displayed, the system may be malfunctioning.Take your vehicle to your Toyota dealer. Displays the outside temperature within the range of -40°F (-40°C) to 122°F (50°C). When the outside temperature is approximately 37°F (3°C) or lower, the indicator will flash for approximately 10 seconds, then stay on. Liquid crystal display Liquid crystal display Customization Settings (e. g. meter display) can be changed on the screen of the multi-information display. (Settings display) Warning: The information display at low temperatures Allow the interior of the vehicle to warm up before using the liquid crystal information display. At extremely low temperatures, the display monitor may respond slowly, and display changes may be delayed. For example, there is a lag between the driver’s shifting and the new gear number appearing on the display. This lag could cause the driver to downshift again, causing rapid and excessive engine braking and possibly an accident resulting in death or injury. Notice: To prevent damage to the engine and its components Do not let the indicator needle of the tachometer enter the red zone, which indicates the maximum engine speed. The engine may be overheating if the engine coolant temperature gauge is in the red zone (“ H”). In this case, immediately stop the vehicle in a safe place, and check the engine after it has cooled completely. (If your vehicle overheats) Switches “ODO TRIP” switch Odometer and trip meter display “ODO TRIP” switch “ODO TRIP” switch Odometer and trip meter display Display items Using the “ODO TRIP” switch Switches the items of the odometer, trip meter A and trip meter B by pressing the “ODO TRIP” switch. When the trip meter is displayed, pressing and holding the switch will reset the trip meter. Meter Instrument panel light control Instrument panel light control Brightness control Instrument panel light control Switches Instrument panel light control switches Instrument panel light control The brightness of the instrument panel lights can be adjusted by turning the dial. Brighter Darker Note: Instrument panel brightness adjustment The instrument panel brightness levels when the tail lights are on and off can be adjusted individually. However, when the surroundings are bright (daytime, etc.), turning on the tail lights will not change the instrument panel brightness.