Customizable features Your vehicle includes a variety of electronic features that can be personalized to suit your preferences. The settings of these features can be changed using the multi-information display, navigation/multimedia system, or at your Toyota dealer. Some function settings are changed simultaneously with other functions being customized. Contact your Toyota dealer for further details. Customizing vehicle features Changing using the navigation/multimedia system Press the “MENU” button. Select “ Setup” on the menu screen and select “ Vehicle”. Select “ Vehicle Customization”. Various setting can be changed. Refer to the list of settings that can be changed for details. Changing using the multi-information display Press or of the meter control switches and select . Press or of the meter control switches, select the item. To switch the function on and off, press to switch to the desired setting. To perform detailed setting of functions that support detailed settings, press and hold and display the setting screen. The method of performing detailed setting differs for each screen. Please refer to the advice sentence displayed on the screen. To go back to the previous screen or exit the customize mode, press . Note: When customizing using the navigation/multimedia system or multi-information display Stop the vehicle in a safe place, apply the parking brake, and shift the shift lever to P. Also, to prevent battery discharge, leave the engine running while customizing the features. Warning: During customization As the engine needs to be operating during customization, ensure that the vehicle is parked in a place with adequate ventilation. In a closed area such as a garage, exhaust gases including harmful carbon monoxide (CO) may collect and enter the vehicle. This may lead to death or a serious health hazard. Notice: During customization To prevent battery discharge, ensure that the engine is running while customizing features. Multi-information display Settings Meter Settings Customizable Features Some function settings are changed simultaneously with other functions being customized. Contact your Toyota dealer for further details. Vehicles with navigation system or multimedia system: Settings that can be changed using the navigation system or multimedia system Settings that can be changed using the multi-information display Settings that can be changed by your Toyota dealer Definition of symbols: O = Available, – =Not available Multi-information display Units Multi-information display Language Meter Units Language (multi-information display)Gauges, meters and multi-information display (Gauges and meters (with 4.2-inch display), Gauges and meters (with 7-inch display), Multi-information display)

Function*1	Default setting	Customized setting
Language*2	English	French	O	O	–
		Spanish
Units*2	miles (MPG US)	km (km/L)	O	O	–
		km (L/100 km)
		miles (MPG Imperial)
Speedometer display*3	Analog	Digital	–	O	–
Eco Driving Indicator Light	On	Off	–	O	–
“ Fuel Economy”	“ Total Average”	“ Trip Average”	–	O	–
		“ Tank Average”
Audio system linked display	On	Off	–	O	–
AWD system display*4	On	Off	–	O	–
Drive information type	Trip	Total	–	O	–
Drive information items (first item)	Distance	Average Speed	–	O	–
		Total Time
Drive information items (second item)	Total Time	Average Speed	–	O	–
		Distance
Pop-up display	On	Off	–	O	–
Multi-Information display off	Off	On	–	O	–
Suggestion function	On	On (when the vehicle is stopped)	O	–	O
		Off

^*1For details about each function: Settings display ^*2The default setting varies according to country. ^*3Vehicles with 7-inch display only ^*4AWD models Door lock (Side doors, If the electronic key does not operate properly (vehicles with smart key system))

Function	Defaultsetting	Customizedsetting
Unlocking using a key	Driver’s door unlocked in first step, all doors unlocked in second step	All doors unlocked in first step	–	–	O
Automatic door locking function	Shift position linked door locking operation	Off	O	–	O
		Speed linked door locking operation
Automatic door unlocking function	Shift position linked door unlocking operation	Off	O	–	O
		Driver’s door linked door unlocking operation

Smart key system^* and wireless remote control (Wireless remote control, Smart key system*)

Function	Default setting	Customized setting
Operation signal (emergency flashers)	On	Off	O	–	O
Operation buzzer volume	5	Off	O	–	O
		1 to 7
Time elapsed before the automatic door lock function is activated if a door is not opened after being unlocked	60 seconds	Off	O	–	O
		30 seconds
		120 seconds
Open door reminder buzzer (When locking the vehicle)	On	Off	–	–	O

^*If equipped Smart key system^*1 (Smart key system*)

Function	Default setting	Customized setting
Smart key system	On	Off	–	–	O
Smart door unlocking	Driver’s door	All the doors	O	–	O
Number of consecutive door lock operations	2 times	As many as desired	–	–	O
Time elapsed before unlocking all the door when gripping and holding the driver’s door handle*2	2 seconds	Off	–	–	O
		1.5 seconds
		2.5 seconds

^*1If equipped ^*2This setting can be changed when the smart door unlocking setting is set to “Driver’s door”. Wireless remote control (Wireless remote control)

Function	Default setting	Customized setting
Wireless remote control	On	Off	–	–	O
Unlocking operation	Driver’s door unlocked in first step, all doors unlocked in second step	All doors unlocked in first step	O	–	O
Theft deterrent panic mode	On	Off	–	–	O
Locking operation when door opened	On	Off	O	–	O
The function that activates the switch of the wireless remote control when locking the door* (Using the wireless remote control)	On (Unlocking all the door)	Off	–	–	O
		On (Unlocking back door only)

^*If equipped Power back door^*1 (Opening/closing the back door (vehicles with power back door))

Function	Default setting	Customized setting
Power back door operations	On	Off	–	O	–
Back door opener switch operations	Press and hold	One short press	–	–	O
switch of the wireless remote control operation	Press and hold	One short press	–	–	O
		Push twice
		Off
Operation buzzer volume	3	1	–	O	–
		2
Operation buzzer while the back door is operating*2	Off	On	–	–	O
Opening angle	5	1 to 4	–	O	–
		User setting*3
Power back door open operation when the opener switch is pressed with the back door fully closed	On	Off	–	–	O
Kick Sensor*1, 4	On	Off	–	O	O

^*1If equipped ^*2The operation buzzer that sounds when the back door begins to operate cannot be turned off. ^*3The open position is set by the power back door switch. (Adjusting the open position of the back door (vehicles with power back door)) ^*4When the towing hitch is installed, kick sensor does not work. Driving position memory^* (Driving position memory*)

Function	Default setting	Customized setting
Selection the door linking driving position memory with door unlock operation	Driver’s door	All doors	–	–	O
Function to prevent contact between the head restraint and ceiling (while moving to memory location)	On	Off	–	–	O

^*If equipped Power windows, and moon roof^* or panoramic moon roof^* (Power windows, Moon roof*, Panoramic moon roof*)

Function	Default setting	Customized setting
Key linked operation (open)	Off	On	–	–	O
Key linked operation (close)	Off	On	–	–	O
Wireless remote control linked operation (open)	Off	On	–	–	O
Wireless remote control linked operation signal (buzzer)	On	Off	–	–	O
Side windows open warning function	On	Off	–	–	O
Sliding roof open warning function	On	Off	–	–	O

^*If equipped Turn signal lever (Turn signal lever)

Function	Defaultsetting	Customized setting
The number of times the turn signal lights flash automatically when the turn signal lever is moved to the first position during a lane change	3	4	–	–	O
		5
		6
		7
		Off

Lights (Headlight switch)

Function	Default setting	Customized setting
Daytime Running Lights*	On	Off	O	–	O
Light reminder buzzer	On	Off	–	–	O

^*Except for Canada Automatic light control system^* (Headlight switch)

Function	Default setting	Customized setting
Light sensor sensitivity	Standard	–2 to 2	O	–	O
Time elapsed before headlights automatically turn off after doors are closed	30 seconds	Off	O	–	O
		60 seconds
		90 seconds
Windshield wiper linked headlight illumination	On	Off	–	–	O

^*If equipped Rear window wiper (Rear window wiper and washer)

Function	Default setting	Customized setting
Back door opening linked rear window wiper stop function	Off	On	–	–	O
Washer linked rear window wiper	On	Off	–	–	O
Shift position linked rear window wiper (Reverse-linked rear window wiper function)	Only once	Off	–	–	O
		Continuous

PCS (Pre-Collision System) (PCS (Pre-Collision System))

Function	Default setting	Customized setting
PCS (Pre-Collision System)	On	Off	–	O	–
Adjust alert timing	Middle	Far	–	O	–
		Near

LTA (Lane Tracing Assist) (LTA (Lane Tracing Assist))

Function	Default setting	Customized setting
Lane centering function	Off	On	–	O	–
Steering assist function	On	Off	–	O	–
Alert sensitivity	Standard	High	–	O	–
Vehicle sway warning function	On	Off	–	O	–
Vehicle sway warning sensitivity	Standard	Low	–	O	–
		High

RSA (Road Sign Assist)^* (RSA (Road Sign Assist)*)

Function	Default setting	Customized setting
RSA (Road Sign Assist)	On	Off	–	O	–
Excess speed notification method	Display only	No notification	–	O	–
		Display and buzzer
No-overtaking notification method	Display only	No notification	–	O	–
		Display and buzzer
Other notifications method (No-entry notification)	Display only	No notification	–	O	–
		Display and buzzer
Excess speed notification level	2 km/h (1 mph)	5 km/h (3 mph)	–	O	–
		10 km/h (5 mph)

^*If equipped Dynamic radar cruise control with full-speed range (Dynamic radar cruise control with full-speed range)

Function	Default setting	Customized setting
Dynamic Radar Cruise Control with Road Sign Assist*	On	Off	–	O	–

^*If equipped BSM (Blind Spot Monitor)^* (BSM (Blind Spot Monitor)*)

Function	Default setting	Customized setting
BSM (Blind Spot Monitor)	On	Off	–	O	–
Outside rear view mirror indicator brightness	Bright	Dim	–	O	–
Alert timing for presence of approaching vehicle (sensitivity)	Intermediate	Early	–	O	–
		Late
		Only when vehicle detected in blind spot

^*If equipped RCTA (Rear cross traffic alert) function^*1 (BSM (Blind Spot Monitor)*)

Function	Default setting	Customized setting
RCTA (Rear cross traffic alert) function	On	Off	–	O	–
Buzzer volume*2	Level 2	Level 1	–	O	–
		Level 3

^*1If equipped ^*2This setting is linked with the buzzer volume of the intuitive parking assist. Intuitive parking assist^*1 (Intuitive parking assist*)

Function	Default setting	Customized setting
Display setting (When Intuitive parking assist is operating)	On	Off	–	O	O
Buzzer volume*2	2	1	–	O	O
		3

^*1If equipped ^*2This setting is linked with the buzzer volume of the RCTA (Rear cross traffic alert) function. PKSB (Parking Support Brake)^* (PKSB (Parking Support Brake)*)

Function	Default setting	Customized setting
PKSB (Parking Support Brake) function	On	Off	–	O	–

^*If equipped Stop & Start system^* (Stop & Start system*)

Function	Default setting	Customized setting
Change the Stop & Start system duration when the A/C is on	Standard	Extended	–	O	–

^*If equipped Automatic air conditioning system^* (Automatic air conditioning system)

Function	Default setting	Customized setting
A/C Auto switch operation	On	Off	O	–	O
Switching to the outside air mode when the vehicle is parked	On	Off	–	–	O

^*If equipped Illumination (Interior lights list)

Function	Default setting	Customized setting
Time elapsed before the interior lights turn off	15 seconds	Off	O	–	O
		7.5 seconds
		30 seconds
Operation after the engine switch is turned off	On	Off	–	–	O
Operation when the doors are unlocked	On	Off	–	–	O
Operation when you approach the vehicle with the electronic key on your person*1	On	Off	–	–	O
Footwell lighting*2	On	Off	–	–	O

^*1Vehicles with smart key system only ^*2If equipped Note: Vehicle customization When the speed linked door locking function and shift position linked door locking function are both on, the door lock operates as follows. If the vehicle is started with all the doors locked, the speed linked door locking function would not operate. If the vehicle is started with any door unlocked, the speed linked door locking function will operate. When shifting the shift lever to any position other than P, all the doors will be locked. When the smart key system is off, the selecting door to unlock cannot be customized. When the doors remain closed after unlocking the doors and the automatic door lock function is activated, the signals will be generated in accordance with the Operation signal (buzzer) and the Operation signal (emergency flashers) settings.