Command list Command list overview Recognizable voice commands and their actions are shown below. Frequently used commands are listed in the following tables. For devices that are not installed to the vehicle, commands relating to that device may not be displayed on the screen. Also, depending on other conditions, such as compatibility, some commands may not be displayed on the screen. The functions available may vary according to the system installed. Voice recognition language can be changed. (Displaying the general settings screen) Command list Common
Command Action
“ Help” Displays examples of some of the available commands
“ Go back” Returns to the previous screen
“ Cancel” Cancels the voice command system
“ Start over” Returns to top menu screen
“ Pause” Temporarily pauses a voice session until it is resumed by pressing the talk switch again.
Top menu
Command Action
“ Show command examples for <menu>” Displays the command list of the selected menu
“ More commands” Displays more commonly used commands
“ Voice settings” Displays Voice Setting screen
“ Train my voice” Displays Train Voice Recognition screen*
*Vehicle must be parked Phone*1
Command Action
“ Call <contact>”*2 Places a call to the specified contact from the phone book
“ Call <contact> <phone type>”*2 Places a call to the specified phone type of the contact from the phone book
“ Dial <phone number>” Places a call to the specified phone number
“ Redial” Places a call to the phone number of the latest outgoing call
“ Call back” Places a call to the phone number of latest incoming call
“ Show recent calls” Displays the call history screen
“ Send a message to <contact>” Sends a text message to specified contact from the phone book
*1When an Apple CarPlay connection is established, this voice commands will be unavailable. *2If the system does not recognize the name of a contact, create a voice tag. (Contacts/Call history settings screen) The name of a contact can also be recognized by adding a voice tag. While in a phone call*
Command Action
“ Send <digits>” Sends DTMF tones has specified
“ Mute” Mutes the microphone (far side cannot hear the conversation)
“ Unmute” Unmutes the microphone
*When an Apple CarPlay connection is established, this voice commands will be unavailable. While incoming message notification is displayed*1, 2
Command Action
“ Read message” Reads the incoming message over the vehicle speakers
“ Ignore” Ignores the incoming message notification
“ Reply” Initiates sending a reply to the incoming message
“ Call” Places a call to the phone number of incoming message
*1Full screen message notification must be turned on within the phone settings (Setup) *2When an Apple CarPlay connection is established, this voice commands will be unavailable. Radio
Command Action
“ Tune to <frequency> AM” Changes the radio to the specified AM frequency
“ Tune to <frequency> FM” Changes the radio to the specified FM frequency
“ Play a <genre> station” Changes the radio to an FM station of the specified genre*
“ Tune to preset <1-36>” Changes the radio to the specified preset radio station
*0A station list must be built first using the radio screen (AM/FM radio) Audio*1
Command Action
“ Play Playlist <name>”*2 Plays tracks from the selected playlist
“ Play Artist <name>”*2 Plays tracks from the selected artist
“ Play Song <name>”*2 Plays the selected track
“ Play Album <name>”*2 Plays tracks from the selected album
“ Play Genre <name>”*2 Plays tracks from the selected genre
“ Play Composer <name>”*2 Plays tracks from the selected composer
“ Play Podcast <name>”*2 Plays tracks from the selected podcast
“ Play Audiobook <name>”*2 Plays tracks from the selected audiobook
“ Audio On” Turns the audio/visual system on
“ Audio Off” Turns the audio/visual system off
“ Change the audio source to <source name>” Sets the source to the specified audio mode
*1The audio device must be connected via a USB cable to use the functionality in this section *2When an Apple CarPlay connection is established, this voice commands will be unavailable. Apps*1
Command Action
“ Launch <application name>”*2 Activates the Toyota Entune App Suite Connect application
*1When an Apple CarPlay connection is established, this voice command will be unavailable. *2When an application is opened and is in full screen mode, pressing the talk switch will start the voice command system and commands for the currently displayed application will be available Note: Commands relating to operation of the audio/visual system can only be performed when the audio/visual system is turned on.