Customizable features Your vehicle includes a variety of electronic features that can be personalized to suit your preferences. The settings of these features can be changed using the multi-information display, the navigation/multimedia system, or at your Toyota dealer. Customizing vehicle features Changing by using the navigation/multimedia system Press the “ MENU” button. Select “ Setup” on the “ Menu” screen. Select “ General” or “ Vehicle” on the “ Setup” screen. Various setting can be changed. Refer to the list of settings that can be changed for details. Changing by using the meter control switches 4.2-inch display Press or of the meter control switch to select . Press or of the meter control switch to select the desired item to be customized. Press or press and hold . The available settings will differ depending on if is pressed or pressed and held. Follow the instructions on the display. 7-inch display Press or of the meter control switch to select . Press or of the meter control switch to select the desired item to be customized. Press or press and hold . The available settings will differ depending on if is pressed or pressed and held. Follow the instructions on the display. Note: When customizing using the navigation/multimedia system Stop the vehicle in a safe place, apply the parking brake, and shift the shift lever to P. Also, to prevent 12-volt battery discharge, leave the hybrid system operating while customizing the features. Warning: During customization As the hybrid system needs to be operating during customization, ensure that the vehicle is parked in a place with adequate ventilation. In a closed area such as a garage, exhaust gases including harmful carbon monoxide (CO) may collect and enter the vehicle. This may lead to death or a serious health hazard. Notice: During customization To prevent 12-volt battery discharge, ensure that the hybrid system is operating while customizing features. Customizable Features Some function settings are changed simultaneously with other functions being customized. Contact your Toyota dealer for further details. Settings that can be changed using the navigation/multimedia system screen Settings that can be changed using the meter control switches Settings that can be changed by your Toyota dealer Definition of symbols: O = Available, — = Not available Predictive efficient drive^*1 (Predictive efficient drive (vehicles with a navigation system)*)

Function	Default setting	Customized setting
Predictive efficient drive	On	Off	O	—	—

^*1Vehicles with navigation system^{*2 *2}This function can only be used in the mainland U.S.A. It cannot be used in other states and territories, including Alaska and Hawaii. Gauges, meters and multi-information display (Warning lights and indicators, Gauges and meters, Multi-information display (4.2-inch display), Multi-information display (7-inch display))

Function*1	Default setting	Customized setting
Language	English	French	O	O	—
		Spanish
Units*2	miles (MPG)	km (km/L)	O	O	—
		km (L/100 km)
		miles (MPG Imperial)
EV indicator	On	Off	—	O	—
Eco Accelerator Guidance*3	On	Off	—	O	—
Fuel economy display*3	Total average (Average fuel consumption [after reset])	Trip average (Average fuel consumption [after start])	—	O	—
		Tank average (Average fuel consumption [after refuel])
Audio system linked display*3	On	Off	—	O	—
Energy monitor*3	On	Off	—	O	—
AWD system display*3, 4	On	Off	—	O	—
Drive information type*3	After start	After reset	—	O	—
Drive information items (First item)*3	Distance	Average vehicle speed	—	O	—
		Elapsed time
Drive information items (Second item)*3	Elapsed time	Average vehicle speed	—	O	—
		Distance
Current trip result display*3	Eco score	Drive information	—	O	—
Speedometer display*5	On	Off	—	O	—
Gadget content*5	Off	Average vehicle speed	—	O	—
		Distance
		Elapsed time
Fuel economy type*5	Trip (after reset)	Total (after start)*6	—	O	—
		Tank (after refuel)*7
Pop-up display	On	Off	—	O	—
Rear seat reminder function	On	Off	—	O	—
Suggestion function	On	On (when the vehicle is stopped)	O	—	O
		Off

^*1For details about each function: Settings display - Meter settings, Settings display - Meter settings ^*2The default setting varies according to country. ^*34.2-inch display ^*4AWD models ^*57-inch display ^*6Selecting this item will only change the gadget. ^*7Selecting this item will turn the display of the gadget off. Head-up Display^* (Head-up display*)

Function	Default setting	Customized setting
Head-up display	On	Off	—	O	—
Gauge information	Hybrid System Indicator	Tachometer	—	O	—
		No content
Route guidance to destination/street name	On	Off	—	O	—
Driving support system display	On	Off	—	O	—
Compass	On	Off	—	O	—
Audio system operation status	On	Off	—	O	—

^*If equipped Door lock (Side doors, If the electronic key does not operate properly)

Function	Default setting	Customized setting
Unlocking using a mechanical key	Driver’s door unlocked in one step, all doors unlocked in two step	All doors unlocked in one step	—	—	O
Automatic door locking function	Shift position linked door locking operation	Off	O	—	O
		Speed linked door locking operation
Automatic door unlocking function	Shift position linked door unlocking operation	Off	O	—	O
		Driver’s door linked door unlocking operation

Smart key system and wireless remote control (Side doors, Smart key system)

Function	Default setting	Customized setting
Operation buzzer volume	5	Off	O	—	O
		1 to 7
Operation signal (emergency flashers)	On	Off	O	—	O
Time elapsed before automatic door lock function is activated if door is not opened after being unlocked	60 seconds	Off	O	—	O
		30 seconds
		120 seconds
Open door reminder buzzer (when locking the vehicle)	On	Off	—	—	O

Smart key system (Side doors, Smart key system)

Function	Default setting	Customized setting
Smart key system	On	Off	—	—	O
Smart door unlocking	Driver’s door	All the doors	O	—	O
Number of consecutive door lock operations	2 times	As many as desired	—	—	O
Time elapsed before unlocking all the door when gripping and holding the driver’s door handle*	2 seconds	Off	—	—	O
		1.5 seconds
		2.5 seconds

^*This setting can be changed when the smart door unlocking setting is set to driver’s door. Wireless remote control (Wireless remote control, Side doors, Back door)

Function	Default setting	Customized setting
Wireless remote control	On	Off	—	—	O
Unlocking operation	Driver’s door unlocked in one step, all doors unlocked in two step	All doors unlocked in one step	O	—	O
Theft deterrent panic mode	On	Off	—	—	O
Locking operation when door opened	On	Off	O	—	O

Power back door (Back door)

Function	Default setting	Customized setting
Power back door	On	Off	—	O	—
Kick sensor*1	On	Off	—	O	—
Power back door opening position	5	1 to 4	—	O	—
		User setting*2
Buzzer volume	Level 3	Level 1	—	O	—
		Level 2
Opening/closing of the back door using the power back door switch on the instrument panel	Press and hold	One short press	—	—	O
Opening/closing of the power back door using the switch of the wireless remote control	Press and hold	One short press	—	—	O
		Push twice
		Off
Operation buzzer while the back door is operating*3	Off	On	—	—	O
Power back door open operation when the back door opener switch is pressed	On	Off	—	—	O

^*1If equipped ^*2The open position is set by the power back door switch. (Settings display - Vehicle settings, Settings display - Vehicle settings) ^*3The operation buzzer that sounds when the back door begins to operate cannot be turned off. Driving position memory^* (Driving position memory*)

Function	Default setting	Customized setting
Selecting doors linked to the memory recall function	Driver’s door	All doors	—	—	O

^*If equipped Power windows and moon roof^* (Power windows, Moon roof*)

Function	Default setting	Customized setting
Mechanical key linked operation	Off	On	—	—	O
Wireless remote control linked operation	Off	On (open only)	—	—	O
Wireless remote control linked operation signal (buzzer)	On	Off	—	—	O

^*If equipped Moon roof^* (Moon roof*)

Function	Default setting	Customized setting
Linked operation of components when mechanical key is used (open only)	Slide only	Tilt only	—	—	O
Linked operation of components when wireless remote control is used	Slide only	Tilt only	—	—	O

^*If equipped Automatic light control system (Headlight switch)

Function	Default setting	Customized setting
Light sensor sensitivity	Standard	-2 to 2	O	—	O
Time elapsed before headlights automatically turn off after doors are closed	30 seconds	Off	O	—	O
		60 seconds
		90 seconds
Windshield wiper linked headlight illumination	On	Off	—	—	O

Lights (Headlight switch)

Function	Default setting	Customized setting
Daytime running lights	On	Off*1	O	—	O
Welcome lighting	On	Off	—	—	O
AFS (Adaptive Front-lighting System)*2	On	Off	—	—	O

^*1Except for Canada ^*2If equipped Rear window wiper (Rear windshield wiper and washer)

Function	Default setting	Customized setting
Back door opening linked rear window wiper stop function	Off	On	—	—	O
Washer linked rear window wiper operation	On	Off	—	—	O
Shift position linked rear window wiper operation (Reverse-linked rear window wiper function)	Only once	Off	—	—	O
		Continuous

PCS (Pre-Collision System) (PCS (Pre-Collision System))

Function	Default setting	Customized setting
PCS (Pre-Collision System)	On	Off	—	O	—
Adjust alert timing	Middle	Early	—	O	—
		Late

LTA (Lane Tracing Assist) (LTA (Lane Tracing Assist))

Function	Default setting	Customized setting
Lane centering function	On	Off	—	O	—
Alert sensitivity	High	Standard	—	O	—
Vehicle sway warning function	On	Off	—	O	—
Vehicle sway warning sensitivity	Standard	High	—	O	—
		Low

RSA (Road Sign Assist)^* (RSA (Road Sign Assist)*)

Function	Default setting	Customized setting
RSA (Road Sign Assist)	On	Off	—	O	—
Excess speed notification method	Display only	No notification	—	O	—
		Display and buzzer
Excess speed notification level	1 mph (2 km/h)	3 mph (5 km/h)	—	O	—
		5 mph (10 km/h)
Other notifications method (no-entry notification)	Display only	No notification	—	O	—
		Display and buzzer

^*If equipped Dynamic radar cruise control with full-speed range (Dynamic radar cruise control with full-speed range)

Function	Default setting	Customized setting
Curve speed reduction function strength	High	Low	—	O	—
		Off

BSM (Blind Spot Monitor) (BSM (Blind Spot Monitor))

Function	Default setting	Customized setting
BSM (Blind Spot Monitor)	On	Off	—	O	—
Outside rear view mirror indicator brightness	Bright	Dim	—	O	—
Alert timing for presence of approaching vehicle (sensitivity)	Intermediate	Early	—	O	—
		Late
		Only when vehicle detected in blind spot

Intuitive parking assist^* (Intuitive parking assist*)

Function	Default setting	Customized setting
Intuitive parking assist	On	Off	—	O	—
Buzzer volume	Level 2	Level 1	—	O	—
		Level 3

^*If equipped RCTA (Rear Cross Traffic Alert) function (RCTA (Rear Cross Traffic Alert) function)

Function	Default setting	Customized setting
RCTA (Rear Cross Traffic Alert) function	On	Off	—	O	—
Buzzer volume	Level 2	Level 1	—	O	—
		Level 3

PKSB (Parking Support Brake)^* (PKSB (Parking Support Brake)*)

Function	Default setting	Customized setting
PKSB (Parking Support Brake) function	On	Off	—	O	—

^*If equipped Front automatic air conditioning system (Front automatic air conditioning system)

Function	Default setting	Customized setting
A/C auto switch operation	On	Off	O	—	O

Illumination (Interior lights list)

Function	Default setting	Customized setting
Time elapsed before the interior lights turn off	15 seconds	Off	O	—	O
		7.5 seconds
		30 seconds
Operation after the power switch is turned off	On	Off	—	—	O
Operation when the doors are unlocked	On	Off	—	—	O
Operation when you approach the vehicle with the electronic key on your person	On	Off	—	—	O
Instrument panel ornament light* and door trim ornament lights*	On	Off	—	—	O
Time elapsed before the outer foot lights* turn off	15 seconds	Off	O	—	O
		7.5 seconds
		30 seconds
Operation of the outer foot lights* when you approach the vehicle with the electronic key on your person	On	Off	—	—	O
Operation of the outer foot lights* when the doors are unlocked with the power door lock switch	On	Off	—	—	O

^*If equipped Note: Vehicle customization When the smart key system is off, smart door unlocking cannot be customized. When the doors remain closed after unlocking the doors and the timer activated automatic door lock function activates, signals will be generated in accordance with the operation buzzer volume and operational signal (emergency flashers) function settings.