PKSB (Parking Support Brake)^{* *}If equipped The Parking Support Brake system consists of the following functions that operate when driving at a low speed or backing up, such as when parking. When the system determines that the possibility of a collision with a detected object is high, a warning operates to urge the driver to take evasive action. If the system determines that the possibility of a collision with a detected object is extremely high, the brakes are automatically applied to help avoid the collision or help reduce the impact of the collision. PKSB (Parking Support Brake) system Parking Support Brake function (static objects) (if equipped) Ultrasonic sensors are used to detect static objects, such as a wall, in the detection area when driving at a low speed or backing up. (Parking Support Brake function (static objects)*) Parking Support Brake function (rear-crossing vehicles) (if equipped) Rear radar sensors are used to detect approaching vehicles in the detection area behind the vehicle when backing up. (Parking Support Brake function (rear-crossing vehicles)*) Warning: Limitations of the Parking Support Brake system Do not overly rely on the system, as doing so may lead to an accident. The driver is solely responsible for safe driving. Always drive carefully, taking care to observe your surroundings. The Parking Support Brake system is designed to provide support to lessen the severity of collisions. However, it may not operate in some situations. The Parking Support Brake system is not designed to stop the vehicle completely. Additionally, even if the system has stopped the vehicle, it is necessary to depress the brake pedal immediately as brake control will be canceled after approximately 2 seconds. Notice: If “ PKSB Unavailable” is displayed on the multi-information display and the PKSB OFF indicator is flashing If this message is displayed immediately after the power switch is changed to ON, operate the vehicle carefully, paying attention to your surroundings. It may be necessary to drive the vehicle for a certain amount of time before the system returns to normal. (If the system is not return to normal after driving for a while, clean the sensors and their surrounding area on the bumpers.) Switches PKSB (Parking Support Brake) switch Enabling/Disabling the Parking Support Brake The Parking Support Brake can be enabled/disabled on the multi-information display. All of the Parking Support Brake functions (static objects and rear-crossing vehicles) are enabled/disabled simultaneously. Use the meter control switches to enable/disable the parking support brake. (Settings display) Press or to select . Press or to select and then press . When the Parking Support Brake is disabled, the PKSB OFF indicator (Indicators) illuminates on the instrument cluster. To re-enable the system when it was disabled, select on the multi-information display, select and turn it on. If the system is disabled, it will remain off even if the power switch is turned to ON after the power switch has been turned off. Displays and buzzers for hybrid system output restriction control and brake control If the hybrid system output restriction control or brake control operates, a buzzer will sound and a message will be displayed on the audio system screen and multi-information display, to alert the driver. Depending on the situation, hybrid system output restriction control will operate to either limit acceleration or restrict output as much as possible. Hybrid system output restriction control is operating (acceleration restriction) Acceleration greater than a certain amount is restricted by the system. Audio system screen (Panoramic view monitor) (if equipped): No warning displayed Multi-information display: “ Object Detected Acceleration Reduced” PKSB OFF indicator: Not illuminated Buzzer: Does not sound Hybrid system output restriction control is operating (output restricted as much as possible) The system has determined that stronger-than-normal brake operation is necessary. Audio system screen (Panoramic view monitor) (if equipped): “ BRAKE!” Multi-information display/Head-up display (if equipped): “ BRAKE!” PKSB OFF indicator: Not illuminated Buzzer: Short beep Brake control is operating The system determined that emergency braking is necessary. Audio system screen (Panoramic view monitor) (if equipped): “ BRAKE!” Multi-information display/Head-up display (if equipped): “ BRAKE!” PKSB OFF indicator: Not illuminated Buzzer: Short beep Vehicle stopped by system operation The vehicle has been stopped by brake control operation. Audio system screen (Panoramic view monitor) (if equipped): “ Press Brake Pedal” Multi-information display/Head-up display (if equipped): “ Switch to Brake” (If the accelerator pedal is not depressed, “ Press Brake Pedal” will be displayed.) PKSB OFF indicator: Illuminated Buzzer: Short beep System overview If the Parking Support Brake determines that a collision with a detected object is possible, the hybrid system output will be restricted to restrain any increase in the vehicle speed. (Hybrid system output restriction control: See figure 2.)Additionally, if the accelerator pedal continues to be depressed, the brakes will be applied automatically to reduce the vehicle speed. (Brake control: See figure 3.) Figure 1 When the PKSB (Parking Support Brake) is disabled Hybrid system output Braking force Time Figure 2 When hybrid system output restriction control operates Hybrid system output Braking force Time Hybrid system output restriction control begins operating System determines that possibility of collision with detected object is high Hybrid system output reduced Example: Multi-information display: “ BRAKE!” Figure 3 When brake control operates Hybrid system output Braking force Time Hybrid system output restriction control begins operating System determines that possibility of collision with detected object is high Hybrid system output reduced System determines that possibility of collision with detected object is extremely high Brake control begins operating Brake control strength increased Example: Multi-information display: “ BRAKE!” Example: Multi-information display: “ Switch to Brake” Note: If the Parking Support Brake has operated If the vehicle is stopped due to operation of the Parking Support Brake, the Parking Support Brake will be disabled and the PKSB OFF indicator will illuminate. If the Parking Support Brake operates unnecessarily, brake control can be canceled by depressing the brake pedal or waiting for approximately 2 seconds for it to automatically be canceled. Then, the vehicle can be operated by depressing the accelerator pedal. Re-enabling the Parking Support Brake To re-enable the Parking Support Brake when it has been disabled due to system operation perform any of the following operations. At this time, the PKSB OFF indicator will turn off. (Indicators) Turn the PKSB (Parking Support Brake) on (Enabling/Disabling the Parking Support Brake) The shift lever is in P. Drive with no operation targets in the traveling direction of the vehicle Change the traveling direction of the vehicle PKSB (Parking Support Brake) Warning message If “ PKSB Unavailable” is displayed on the multi-information display and the PKSB OFF indicator is flashing If this message is displayed only when the shift lever is in any position other than R, a sensor on the front or rear bumper may be dirty. Clean the sensors and their surrounding area on the bumpers. Initialization may not have been performed after a 12-volt battery terminal was disconnected and reconnected. Initialize the system. (If a 12-volt battery terminal has been disconnected and reconnected)If this message continues to be displayed even after initialization, have the vehicle inspected by your Toyota dealer. PKSB (Parking Support Brake) Warning message If “ Parking Assist Unavailable” and “ Parking Assist Unavailable Clean Parking Assist Sensor” is displayed on the multi-information display and the PKSB OFF indicator is flashing A sensor may be covered with ice, snow, dirt, etc. Remove the ice, snow, dirt, etc., from the sensor to return the system to normal.If this message is shown even after removing dirt from the sensor, or shown when the sensor was not dirty to begin with, have the vehicle inspected by your Toyota dealer. A sensor may be frozen. Once the ice melts, the system will return to normal. Water may be continuously flowing over the sensor surface, such as in a heavy rain. When the system determines that it is normal, the system will return to normal. If a 12-volt battery terminal has been disconnected and reconnected The system needs to be initialized. To initialize the system, drive the vehicle straight ahead for 5 seconds or more at a speed of approximately 22 mph (35 km/h) or more.