Outside rear view mirrors The rear view mirror’s position can be adjusted to enable sufficient confirmation of the rear view. Warning: Important points while driving Observe the following precautions while driving.Failing to do so may result in loss of control of the vehicle and cause an accident, resulting in death or serious injury. Do not adjust the mirrors while driving. Do not drive with the mirrors folded. Both the driver and passenger side mirrors must be extended and properly adjusted before driving. Outside rear view mirrors Adjustment Side mirrors Adjustment Adjustment procedure To select a mirror to adjust, turn the switch. Left Right To adjust the mirror, operate the switch. Up Right Down Left Note: Mirror angle can be adjusted when The power switch is in ACC or ON. When the mirrors are fogged up The outside rear view mirrors can be cleared using the mirror defoggers. Turn on the rear window defogger to turn on the outside rear view mirror defoggers. (Defogging the rear window and outside rear view mirrors) Automatic adjustment of the mirror angle (if equipped) A desired mirror face angle can be entered to memory and recalled automatically by the driving position memory. (Driving position memory*) Outside rear view mirrors Linked mirror function when reversing Side mirrors Linked mirror function when reversing Linked mirror function when reversing (if equipped) When either “ L” or “ R” of the mirror select switch is selected, the outside rear view mirrors will automatically angle downwards when the vehicle is reversing in order to give a better view of the ground. To disable this function, select neither “ L” nor “ R”. To set the mirror angle used when the vehicle is reversing, adjust the mirror angle at a desired position with the shift lever in R. The adjusted angle will be memorized and the mirror will automatically tilt to the memorized angle whenever the shift lever is shifted to R from next time. The memorized downward tilt position of the mirror is linked to the normal position (angle adjusted with the shift lever in other than R). Therefore, if the normal position is changed after adjustment, the tilt position will also change. When the normal position is changed, readjust the angle in reversing. Warning: When the mirror defoggers are operating Do not touch the rear view mirror surfaces, as they can become very hot and burn you. Folding the mirrors Push the mirror back in the direction of the vehicle’s rear.