Driving position memory^{* *}If equipped This feature automatically adjusts the driver’s seat, outside rear view mirrors and head-up display (if equipped) to suit your preferences. Two different driving positions can be recorded into memory. Each electronic key can be registered to recall your preferred driving position. Recording a driving position into memory Check that the shift lever is in P. Turn the power switch to ON. Adjust the driver’s seat, outside rear view mirrors and head-up display (if equipped) to the desired positions. While pressing the “ SET” button, or within 3 seconds after the “ SET” button is pressed, press button “ 1” or “ 2” until the buzzer sounds. If the selected button has already been preset, the previously recorded position will be overwritten. Note: Seat positions that can be memorized The adjusted positions other than the position adjusted by lumbar support switch can be recorded. In order to correctly use the driving position memory function If a seat position is already in the furthest possible position and the seat is operated in the same direction, the recorded position may be slightly different when it is recalled. Warning: Seat adjustment caution Take care during seat adjustment so that the seat does not strike the rear passenger or squeeze your body against the steering wheel. Recalling a driving position Check that the shift lever is in P. Turn the power switch to ON. Press one of the buttons for the driving position you want to recall until the buzzer sounds. Note: To stop the position recall operation part-way through Perform any of the following operations: Press the “ SET” button. Press button “ 1” or “ 2”. Operate any of the seat adjustment switches (only cancels seat position recall). Operating the driving position memory after turning the power switch off Recorded seat positions can be activated up to 180 seconds after the driver’s door is opened and another 60 seconds after it is closed again. When the recorded seat position cannot be recalled The seat position may not be recalled in some situations when the seat position is recorded in a certain range. For details, contact your Toyota dealer. Driving position memory Memory recall function Driver’s seat position memory Memory recall function Front seats Memory recall function Registering/canceling/recall a driving position to an electronic key (memory recall function) Registering procedure Record your driving position to button “ 1” or “ 2” before performing the following: Carry only the key you want to register, and then close the driver’s door. If 2 or more keys are in the vehicle, the driving position cannot be recorded properly. Check that the shift lever is in P. Turn the power switch to ON. Recall the driving position that you want to record. While pressing the recalled button, press and hold the door lock switch (either lock or unlock) until the buzzer sounds. If the button could not be registered, the buzzer sounds continuously for approximately 3 seconds. Cancelation procedure Carry only the key you want to cancel and then close the driver’s door. If 2 or more keys are in the vehicle, the driving position cannot be canceled properly. Turn the power switch to ON. While pressing the “ SET” button, press and hold the door lock switch (either lock or unlock) until the buzzer sounds twice. If the button could not be canceled, the buzzer sounds continuously for approximately 3 seconds. Recall procedure Make sure that the doors are locked before recalling the driving position. Carry the electronic key that has been registered to the driving position, and then unlock and open the driver’s door using the smart key system or wireless remote control. The driving position will move to the recorded position. If the driving position is in a position that has already been recorded, the seat and outside rear view mirrors will not move. Note: Recalling the driving position using the memory recall function Different driving positions can be registered for each electronic key. Therefore, the driving position that is recalled may be different depending on the key being carried. If a door other than the driver’s door is unlocked with the smart key system, the driving position cannot be recalled. In this case, press the driving position button which has been set. Customization Some functions can be customized. (Customizable features)