Multi-information display (7-inch display) Display and menu icons Multi-information display Pop-up display Display The multi-information display presents the driver with a variety of driving-related information. Warning or suggestion/advice pop-up displays are also displayed in certain situations. Multi-information display Menu icons Menu iconsMenu icons Select a menu icon to display its content.

	Driving information display (Driving information display)
	Driving support system information display (Driving support system information display)
	Audio system-linked display (Audio system-linked display)
	Vehicle information display (Vehicle information display)
	Settings display (Settings display)
	Warning message display (Warning message display)

Note: Liquid crystal display Small spots or light spots may appear on the display. This phenomenon is characteristic of liquid crystal displays, and there is no problem continuing to use the display. Warning: Caution for use while driving When operating the multi-information display while driving, pay extra attention to the safety of the area around the vehicle. Do not look continuously at the multi-information display while driving as you may fail to see pedestrians, objects on the road, etc. ahead of the vehicle. The information display at low temperatures The information display at low temperatures Switches Meter control switches Multi-information display Meter control switches Meter Meter control switches Steering wheel Meter control switches Changing the meter display The multi-information display is operated using the meter control switches. Scroll screens^*, change the displayed content^* and move the cursor Press: Enter/SetPress and hold: Reset/Display customizable items Return to the previous screen Call sending/receiving and history display Linked with the hands-free system, sending or receiving call is displayed. For details regarding the hands-free system, refer to the “ NAVIGATION AND MULTIMEDIA SYSTEM OWNER’S MANUAL”. ^*On screens where the screen can be scrolled and the display can be switched, a scroll bar or a round icon that shows the number of registered screens is displayed. Multi-information display Driving information display Driving information displayDriving information display ( ) Multi-information display Fuel economy Fuel economy Current fuel consumption Average fuel economy Driving range Fuel consumption Current fuel consumption Fuel consumption Average fuel economy Fuel economy Use the displayed values as a reference only. Current fuel consumption Displays the instantaneous current fuel consumption. Average fuel economy (after start) Displays the average fuel consumption since hybrid system start.^*1 Driving range Displays the driving range with remaining fuel. This distance is computed based on your average fuel consumption. As a result, the actual distance that can be driven may differ from that displayed. When only a small amount of fuel is added to the tank, the display may not be updated.When refueling, turn the power switch off. If the vehicle is refueled without turning the power switch off, the display may not be updated. When “ Refuel” is displayed, the remaining fuel amount is low and the distance that can be driven with the remaining fuel cannot be calculated.Refuel immediately. Gadget^*2 The following items can be displayed by changing the settings for gadget content and fuel economy type on . (Settings display) Other Blank: No item Average vehicle speed After start: Displays average vehicle speed since hybrid system start After reset: Displays average vehicle speed since the display was reset^*3 Distance After start: Displays the distance driven since vehicle start. After reset: Displays the distance driven since the display was reset^*3 Elapsed time After start: Displays elapsed time since hybrid system start After reset: Displays elapsed time since the display was reset^*3 Average fuel economy Displayed item (listed below) can be changed on the fuel economy type screen of . (Settings display) Total (after reset) Displays the average fuel consumption since the display was reset.^{*1, 3} Tank (after refuel) Displays the average fuel consumption since the vehicle was refueled.^*1 When only a small amount of fuel is added to the tank, the display may not be updated.When refueling, turn the power switch off. If the vehicle is refueled without turning the power switch off, the display may not be updated. ^*1Use the displayed fuel consumption as a reference only. ^*2The default setting is no display. ^*3This display can be reset by pressing and holding while it is displayed. Multi-information display ECO Accelerator Guidance ECO Accelerator Guidance Multi-information display Eco score Eco scoreECO Accelerator Guidance/Eco score Displays a reference operation range for using the accelerator pedal according to driving conditions, and a score result that evaluates the current driving status. ECO Accelerator Guidance Eco score ECO Accelerator Guidance Eco area Indicates that the vehicle is being driven in an Eco-friendly manner. Power area Indicates that the Eco-friendly driving range is being exceeded (during full power driving, etc.) Current accelerator pedal operation Displayed as a green bar when within the Eco area. Eco-friendly acceleration can be achieved by keeping the accelerator pedal operation display within the range indicated by the blue bar. (ECO Accelerator Guidance (, )) Zone of Eco acceleration Displayed as a blue bar, and represents an estimated suitable accelerator pedal operation range for the current driving conditions, such as starting off or cruising. This display changes according to situation, such as when starting off or cruising. Eco score The following 3 Eco driving methods are evaluated in 5 levels: Smooth start-off acceleration, driving without sudden acceleration, and smooth stopping. When the vehicle is stopped, an Eco score out of 100 points will be displayed. Eco start status Eco cruise status Eco stop status Score result How to read the bar display Not yet evaluated Low High After the hybrid system is started, the Eco score will not be displayed until the vehicle speed exceeds approximately 12 mph (20 km/h). The Eco score will be reset each time the hybrid system is started. When the hybrid system is stopped, the total score of the current trip will be displayed. Speedometer display (digital speed)/Driving range Speedometer display (digital speed) Meter settings Driving range Displays driving range with remaining fuel. Use the displayed values as a reference only. This distance is computed based on your average fuel consumption. As a result, the actual distance that can be driven may differ from that displayed. When only a small amount of fuel is added to the tank, the display may not be updated.When refueling, turn the power switch off. If the vehicle is refueled without turning the power switch off, the display may not be updated. When “ Refuel” is displayed, the remaining fuel amount is low and the distance that can be driven with the remaining fuel cannot be calculated.Refuel immediately. Note: The ECO Accelerator Guidance/Eco score will not operate when The ECO Accelerator Guidance/Eco score will not operate in the following situations: The Hybrid System Indicator is not operating. The vehicle is being driven using the dynamic radar cruise control with full-speed range. Multi-information display Driving support system information display Driving support system information display Multi-information display Navigation system-linked display Navigation system-linked displayDriving support system information display ( ) Driving support system information Select to display the operational status of the following systems: LTA (Lane Tracing Assist) (LTA (Lane Tracing Assist)) RSA (Road Sign Assist) (if equipped) (RSA (Road Sign Assist)*) Dynamic radar cruise control with full-speed range (Dynamic radar cruise control with full-speed range) Navigation system-linked display (if equipped) Select to display the following navigation system-linked information: Route guidance to destination Compass display (heading-up display) Note: Route guidance to destination display When the route guidance to destination display is enabled on the head-up display, it will not be displayed on the multi-information display. (Changing the head-up display settings) Multi-information display Audio system-linked display Audio system-linked displayAudio system-linked display ( ) Select to enable selection of an audio source or track on the meter using the meter control switches. This menu icon can be set to be displayed/not displayed in . Multi-information display Vehicle information display Drive information Vehicle information display Average vehicle speed Elapsed time Drive distanceVehicle information display ( ) Multi-information display Energy monitor Energy monitor Energy monitor/consumption screen Multi-information display Tire pressure Tire pressure Tire pressure warning system Multi-information display AWD Control AWD ControlAWD Control (if equipped) Torque distribution display Displays the drive status of each wheel in 6 steps from 0 to 5. G-force display^* Displays the size and direction of the G-force applied to the vehicle via changes to the position of the ball on the display. Maximum G-force course^* This item is linked with the G-force display and the course of the past movement of the ball is displayed. Press and hold to reset the record. Wheel spin display When a tire is spinning, its icon on the display changes its color and blinks. ^*This item is displayed only when driving mode is set to sport mode. Multi-information display Driving support system Safety system status Enable/Disable the following systems: PCS (Pre-Collision system) (PCS (Pre-Collision System)) Intuitive parking assist (if equipped) (Intuitive parking assist*) BSM (Blind Spot Monitor) (BSM (Blind Spot Monitor)) RCTA (Rear Cross Traffic Alert) (RCTA (Rear Cross Traffic Alert) function) Note: Tire pressure It may take a few minutes to display the tire inflation pressure after the power switch is turned to ON. It may also take a few minutes to display the tire inflation pressure after inflation pressure has been adjusted. “ ---” may be displayed if the tire position information cannot be determined due to unfavorable radio wave conditions. Tire inflation pressure changes with temperature. The displayed values may also be different from the values measured using a tire pressure gauge. Multi-information display Settings Meter Settings Language (multi-information display)Settings display ( ) Changing settings Use the meter control switches on the steering wheel to change settings. Press or of the meter control switch to select . Press or of the meter control switch to select the desired item to be customized. Press or press and hold . The available settings will differ depending on if is pressed or pressed and held. Follow the instructions on the display. Setting items LTA (Lane Tracing Assist) (LTA (Lane Tracing Assist)) Press and hold to change the settings of the following items: “ Lane Center” Select to enable/disable the lane centering function. “ Sensitivity” Select to set the warning sensitivity. “ Sway Warning” Select to enable/disable the vehicle sway warning. “ Sway Sensitivity” Select to set the vehicle sway warning sensitivity. PCS (Pre-Collision System) (PCS (Pre-Collision System)) Press to enable/disable the pre-collision system. PCS (Pre-Collision System) on/off Select to enable/disable the pre-collision system. Press and hold to change the settings of the following item: “ Sensitivity” Select to change the pre-collision warning timing. DRCC (Dynamic Radar Cruise Control with full-speed range) (Dynamic radar cruise control with full-speed range) Press and hold to change the settings of the following items: “ Curve Speed Reduction” (Curve speed reduction function) Select to set the curve speed reduction function strength. BSM (Blind Spot Monitor) (BSM (Blind Spot Monitor)) Press to enable/disable the Blind Spot Monitor function. BSM (Blind Spot Monitor) on/off Select to enable/disable the Blind Spot Monitor function. Press and hold to change the settings of the following items: “ Brightness” Select to switch the brightness of the outside rear view mirror indicators. (System components) “ Sensitivity” Select to change the alert timing for an approaching vehicle. Intuitive parking assist (if equipped) (Intuitive parking assist*) Press to enable/disable the Intuitive parking assist. Intuitive parking assist on/off Select to enable/disable the Intuitive parking assist. Press and hold to change the settings of the following item: “ Volume” Select to set the volume of the buzzer which sounds when the Intuitive parking assist is operated. RCTA (Rear Cross Traffic Alert) (RCTA (Rear Cross Traffic Alert) function) Press to enable/disable the Rear Cross Traffic Alert function. RCTA (Rear Cross Traffic Alert) on/off Select to enable/disable the Rear Cross Traffic Alert function. Press and hold to change the settings of the following item: “ Volume” Select to change the volume of the RCTA buzzer. PKSB (Parking Support Brake) (if equipped) (PKSB (Parking Support Brake)*) Press to enable/disable the Parking Support Brake function. HUD (Head-up display) (if equipped) (Head-up display*) Press to enable/disable the head-up display. HUD (Head-up display) on/off Select to enable/disable the head-up display. Press and hold to change the settings of the following items: “ HUD Brightness/Position” Select to adjust the brightness/position of the head-up display. “ HUD Driving Support” Select to change the displayed head-up display driving support item. “ HUD Rotation” Select to adjust the angle of the head-up display. RSA (Road Sign Assist) (if equipped) (RSA (Road Sign Assist)*) Press to enable/disable the Road Sign Assist. RSA (Road Sign Assist) on/off Select to enable/disable the Road Sign Assist. Press and hold to change the settings of the following items: “ Notification Method” Select to change each notification method used to notify the driver when the system recognizes excess speed and no-entry sign. “ Notification Level” Select to change each notification level used to notify the driver when the system recognizes a speed limit sign. Vehicle settings Press and hold to change the settings of the following items: PBD (Power Back Door) (Back door) “ System Settings” Select to enable/disable the power back door system. “ Kick Sensor”^* Select to enable/disable the kick sensor. “ Opening Adjustment” Select the open position when power back door is fully open. “ Volume” Select to set the volume of the buzzer which sounds when the power back door system operates. ^*Vehicles with a hands free power back door “ TPWS” (Tire Pressure Warning System) (Tire pressure warning system) “ Set Pressure” (tire pressure warning system initialization) Select to initialize the tire pressure warning system. “ Change Wheel” (register tire pressure warning system sensor ID codes) Select to register the ID codes of the tire pressure sensors to the tire pressure warning system. “ Rear Seat Reminder” (Rear seat reminder function) Select to enable/disable the rear seat reminder. “ Scheduled Maintenance” (Resetting the message indicating maintenance is required) Select to reset the scheduled maintenance information (maintenance required message and distance until maintenance necessary) after all maintenance is performed. Meter settings Press and hold to change the settings of the following items: Language Select to change the language displayed. Units Select to change the units of measure displayed. EV indicator (EV drive mode) Select to enable/disable the EV indicator. Speedometer display (digital speed) Select to enable/disable the speedometer display. Gadget content Select to turn the display of a gadget. Fuel economy type Select to change the average fuel consumption display and an item to be displayed as gadget. Pop-up display Select to enable/disable pop-up displays for each relevant system. Multi-information display off Displays a blank screen. Default setting Select to reset the meter display settings to the default setting. Vehicle functions and settings that can be changed Customizable features Note: Background color of the indicator/shift position display area The background color of the indicator/shift position display area is changed according to the driving mode as follows (Driving mode select switch): Eco drive mode: Blue Sport mode: Red Suspension of the settings display Some settings cannot be changed while driving. When changing settings, park the vehicle in a safe place. If a warning message is displayed, operation of the settings display will be suspended. Pop-up displays Depending on the pop-up display, the currently displayed item in the message display area may be temporarily not displayed. The item will be displayed after the pop-up display is no longer displayed. Warning: Cautions during setting up the display As the hybrid system needs to be operating during setting up the display, ensure that the vehicle is parked in a place with adequate ventilation. In a closed area such as a garage, exhaust gases including harmful carbon monoxide (CO) may collect and enter the vehicle. This may lead to death or a serious health hazard. Notice: During setting up the display To prevent 12-volt battery discharge, ensure that the hybrid system is operating while setting up the display features. Multi-information display Warning message Warning messageWarning message display ( ) Select to display warning messages and measures to be taken if a malfunction is detected. (If a warning message is displayed) Multi-information display Suggestion function Suggestion functionSuggestion function Displays suggestions to the driver in the following situations. To select a response to a displayed suggestion, use the meter control switches. Suggestion to turn off the headlights If the headlights are left on for a certain amount of time after the power switch has been turned off, if the headlight switch is in the “ AUTO” position, a suggestion message will be displayed asking if you wish to turn the headlights off. To turn the headlights off, select “ Yes”. If the driver's door is opened after the power switch is turned off, this suggestion message will not be displayed. Note: Customization Some functions can be customized. (Customizable features)