Multi-information display (4.2-inch display)

Display and menu icons

Multi-information display Pop-up display Display

The multi-information display presents the driver with a variety of driving-related information.

Warning or suggestion/advice pop-up displays are also displayed in certain situations.

Multi-information display Menu icons

Menu iconsMenu icons

Select a menu icon to display its content.


	Driving information display (Driving information display)
	Driving support system information display (Driving support system information display)
	Audio system-linked display (Audio system-linked display)
	Vehicle information display (Vehicle information display)
	Settings display (Settings display)
	Warning message display (Warning message display)

Note:

Liquid crystal display

Small spots or light spots may appear on the display. This phenomenon is characteristic of liquid crystal displays, and there is no problem continuing to use the display.

Warning:

Caution for use while driving

When operating the multi-information display while driving, pay extra attention to the safety of the area around the vehicle.

Do not look continuously at the multi-information display while driving as you may fail to see pedestrians, objects on the road, etc. ahead of the vehicle.

The information display at low temperatures

Switches Meter control switches

Multi-information display Meter control switches

Meter Meter control switches

Steering wheel Meter control switches Changing the meter display

The multi-information display is operated using the meter control switches.

Scroll screens^*, change the displayed content^* and move the cursor

Press: Enter/SetPress and hold: Reset/Display customizable items

Return to the previous screen

Call sending/receiving and history display

Linked with the hands-free system, sending or receiving call is displayed. For details regarding the hands-free system, refer to the “ NAVIGATION AND MULTIMEDIA SYSTEM OWNER’S MANUAL”.

On screens where the screen can be scrolled and the display can be switched, a scroll bar or a round icon that shows the number of registered screens is displayed.

Multi-information display Driving information display

Driving information displayDriving information display ( )

Speedometer display/Driving range

Speedometer display

Displays the vehicle speed.

Driving range

Displays driving range with remaining fuel. Use the displayed values as a reference only.

This distance is computed based on your average fuel consumption. As a result, the actual distance that can be driven may differ from that displayed.

When only a small amount of fuel is added to the tank, the display may not be updated.When refueling, turn the power switch off. If the vehicle is refueled without turning the power switch off, the display may not be updated.

When “ Refuel” is displayed, the remaining fuel amount is low and the distance that can be driven with the remaining fuel cannot be calculated.Refuel immediately.

Multi-information display Fuel economy

Fuel economy

Current fuel consumption

Average fuel economy

Driving range

Fuel consumption Current fuel consumption

Fuel consumption Average fuel economy Fuel economy

Use the displayed values as a reference only.

Driving range

Displays driving range with remaining fuel.

This distance is computed based on your average fuel consumption. As a result, the actual distance that can be driven may differ from that displayed.

When “ Refuel” is displayed, the remaining fuel amount is low and the distance that can be driven with the remaining fuel cannot be calculated.Refuel immediately.

Current fuel economy

Displays the instantaneous current fuel Economy.

Average fuel economy

Displays the average fuel economy since the function was reset or the average fuel economy after starting or refueling.^{*1, 2, 3}

The average fuel economy display can be changed in . (Settings display)

^*1

Use the displayed fuel consumption as a reference only.

^*2

Average fuel economy since the function was reset can be reset by pressing and holding .

^*3

Average fuel economy after starting is reset each time the engine stops.

Multi-information display ECO Accelerator Guidance

ECO Accelerator Guidance

Multi-information display Eco score

Eco scoreECO Accelerator Guidance/Eco score

Displays a reference operation range for using the accelerator pedal according to driving conditions, and a score result that evaluates the current driving status.

ECO Accelerator Guidance

Eco score

ECO Accelerator Guidance

Eco area

Indicates that the vehicle is being driven in an Eco-friendly manner.

Power area

Indicates that the Eco-friendly driving range is being exceeded (during full power driving, etc.)

Current accelerator pedal operation

Displayed as a green bar when within the Eco area.

Eco-friendly acceleration can be achieved by keeping the accelerator pedal operation display within the range indicated by the blue bar. (ECO Accelerator Guidance (, ))

Zone of Eco acceleration

Displayed as a blue bar, and represents an estimated suitable accelerator pedal operation range for the current driving conditions, such as starting off or cruising.

This display changes according to situation, such as when starting off or cruising.

Eco score

The following 3 Eco driving methods are evaluated in 5 levels: Smooth start-off acceleration, driving without sudden acceleration, and smooth stopping. When the vehicle is stopped, an Eco score out of 100 points will be displayed.

Score result

Eco start status

Eco cruise status

Eco stop status

How to read the bar display

Not yet evaluated

Low

High

After the hybrid system is started, the Eco score will not be displayed until the vehicle speed exceeds approximately 12 mph (20 km/h).

The Eco score will be reset each time the hybrid system is started.

When the hybrid system is stopped, the total score of the current trip will be displayed.

Note:

The ECO Accelerator Guidance/Eco score will not operate when

The ECO Accelerator Guidance/Eco score will not operate in the following situations:

The Hybrid System Indicator is not operating.

The vehicle is being driven using the dynamic radar cruise control with full-speed range.

Multi-information display Driving support system information display

Driving support system information display

Multi-information display Navigation system-linked display

Navigation system-linked displayDriving support system information display ( )

Driving support system information

Select to display the operational status of the following systems:

LTA (Lane Tracing Assist) (LTA (Lane Tracing Assist))

RSA (Road Sign Assist) (if equipped) (RSA (Road Sign Assist)*)

Dynamic radar cruise control with full-speed range (Dynamic radar cruise control with full-speed range)

Multi-information display Audio system-linked display

Audio system-linked displayAudio system-linked display ( )

Select to enable selection of an audio source or track on the meter using the meter control switches.

This menu icon can be set to be displayed/not displayed in .

Multi-information display Vehicle information display

Drive information

Vehicle information display

Average vehicle speed

Elapsed time

Drive distanceVehicle information display ( )

Drive information

2 items that are selected using the “ Drive Info Items” setting (average speed, distance and total time) can be displayed vertically.

The displayed information changes according to the “ Drive Info Type” setting (since the system was started or between resets). (Settings display)

Use the displayed information as a reference only.

Following items will be displayed.

“ Trip”

“ Average Speed”: Displays the average vehicle speed since hybrid system start^*

“ Distance”: Displays the distance driven since hybrid system start^*

“ Total Time”: Displays the elapsed time since hybrid system start^*

These items are reset each time the engine stops.

“ Total”

“ Average Speed”: Displays the average vehicle speed since the display was reset^*

“ Distance”: Displays the distance driven since the display was reset^*

“ Total Time”: Displays the elapsed time since the display was reset^*

To reset, display the desired item and press and hold .

Multi-information display Energy monitor Energy monitor

Energy monitor/consumption screen

Multi-information display Tire pressure Tire pressure

Tire pressure warning system

Multi-information display AWD Control

AWD ControlAWD Control (if equipped)

Torque distribution display

Displays the drive status of each wheel in 6 steps from 0 to 5.

G-force display^*

Displays the size and direction of the G-force applied to the vehicle via changes to the position of the ball on the display.

Maximum G-force course^*

This item is linked with the G-force display and the course of the past movement of the ball is displayed. Press and hold to reset the record.

Wheel spin display

When a tire is spinning, its icon on the display changes its color and blinks.

This item is displayed only when driving mode is set to sport mode.

Note:

Tire pressure

It may take a few minutes to display the tire inflation pressure after the power switch is turned to ON. It may also take a few minutes to display the tire inflation pressure after inflation pressure has been adjusted.

“ ---” may be displayed if the tire position information cannot be determined due to unfavorable radio wave conditions.

Tire inflation pressure changes with temperature. The displayed values may also be different from the values measured using a tire pressure gauge.

Multi-information display Settings

Meter Settings

Language (multi-information display)Settings display ( )

Changing settings

Use the meter control switches on the steering wheel to change settings.

Press or of the meter control switch to select .

Press or of the meter control switch to select the desired item to be customized.

Press or press and hold .

The available settings will differ depending on if is pressed or pressed and held. Follow the instructions on the display.

Setting items

LTA (Lane Tracing Assist) (LTA (Lane Tracing Assist))

Press and hold to change the settings of the following items:

“ Lane Center”

Select to enable/disable the lane centering function.

“ Sensitivity”

Select to set the warning sensitivity.

“ Sway Warning”

Select to enable/disable the vehicle sway warning.

“ Sway Sensitivity”

Select to set the vehicle sway warning sensitivity.

PCS (Pre-Collision System) (PCS (Pre-Collision System))

Press to enable/disable the pre-collision system.

PCS (Pre-Collision System) on/off

Select to enable/disable the pre-collision system.

Press and hold to change the settings of the following item:

“ Sensitivity”

Select to change the pre-collision warning timing.

DRCC (Dynamic Radar Cruise Control with full-speed range) (Dynamic radar cruise control with full-speed range)

Press and hold to change the settings of the following items:

“ Curve Speed Reduction” (Curve speed reduction function)

Select to set the curve speed reduction function strength.

BSM (Blind Spot Monitor) (BSM (Blind Spot Monitor))

Press to enable/disable the Blind Spot Monitor function.

BSM (Blind Spot Monitor) on/off

Select to enable/disable the Blind Spot Monitor function.

Press and hold to change the settings of the following items:

“ Brightness”

Select to switch the brightness of the outside rear view mirror indicators. (System components)

“ Sensitivity”

Select to change the alert timing for an approaching vehicle.

RCTA (Rear Cross Traffic Alert) (RCTA (Rear Cross Traffic Alert) function)

Press to enable/disable the Rear Cross Traffic Alert function.

RCTA (Rear Cross Traffic Alert) on/off

Select to enable/disable the Rear Cross Traffic Alert function.

Press and hold to change the settings of the following item:

“ Volume”

Select to change the volume of the RCTA buzzer.

RSA (Road Sign Assist) (if equipped) (RSA (Road Sign Assist)*)

Press to enable/disable the Road Sign Assist.

RSA (Road Sign Assist) on/off

Select to enable/disable the Road Sign Assist.

Press and hold to change the settings of the following items:

“ Notification Method”

Select to change each notification method used to notify the driver when the system recognizes excess speed and no-entry sign.

“ Notification Level”

Select to change each notification level used to notify the driver when the system recognizes a speed limit sign.

Vehicle settings

Press and hold to change the settings of the following items:

PBD (Power Back Door) (Back door)

“ System Settings”

Select to enable/disable the power back door system.

“ Opening Adjustment”

Select the open position when power back door is fully open.

“ Volume”

Select to set the volume of the buzzer which sounds when the power back door system operates.

“ TPWS” (Tire Pressure Warning System) (Tire pressure warning system)

“ Set Pressure” (tire pressure warning system initialization)

Select to initialize the tire pressure warning system.

“ Change Wheel” (register tire pressure warning system sensor ID codes)

Select to register the ID codes of the tire pressure sensors to the tire pressure warning system.

“ Rear Seat Reminder” (Rear seat reminder function)

Select to enable/disable the rear seat reminder.

“ Scheduled Maintenance” (Resetting the message indicating maintenance is required)

Select to reset the scheduled maintenance information (maintenance required message and distance until maintenance necessary) after all maintenance is performed.

Meter settings

Press and hold to change the settings of the following items:

Language

Select to change the language displayed.

Units

Select to change the units of measure displayed.

EV indicator (EV drive mode)

Select to enable/disable the EV indicator.

Select to change the displayed content of the following:

Hybrid system indicator

Select to display/not display the Eco Accelerator Guidance. (Hybrid System Indicator)

Fuel economy display

Select to change the average fuel consumption display between after start/after reset. (Fuel economy)

Select to display/not display the audio system linked display.

Select to change the displayed content of the following:

Display contents

Select to display/not display the AWD control (if equipped) and energy monitor. (AWD Control (if equipped), Energy monitor/consumption screen)

Drive information type

Select to change the drive information type display between after start/after reset.

Drive information items

Select to set the first and second items of the drive information display to any of the following: average vehicle speed/distance/elapsed time.

Trip Summary

Select to turn the display of a trip summary display.

Pop-up display

Select to enable/disable pop-up displays for each relevant system.

Multi-information display off

Displays a blank screen.

Default setting

Select to reset the meter display settings to the default setting.

Vehicle functions and settings that can be changed

Customizable features

Note:

Suspension of the settings display

Some settings cannot be changed while driving. When changing settings, park the vehicle in a safe place.

If a warning message is displayed, operation of the settings display will be suspended.

Pop-up displays

Depending on the pop-up display, the currently displayed item in the message display area may be temporarily not displayed. The item will be displayed after the pop-up display is no longer displayed.

Warning:

Cautions during setting up the display

As the hybrid system needs to be operating during setting up the display, ensure that the vehicle is parked in a place with adequate ventilation. In a closed area such as a garage, exhaust gases including harmful carbon monoxide (CO) may collect and enter the vehicle. This may lead to death or a serious health hazard.

Notice:

During setting up the display

To prevent 12-volt battery discharge, ensure that the hybrid system is operating while setting up the display features.

Multi-information display Warning message

Warning messageWarning message display ( )

Select to display warning messages and measures to be taken if a malfunction is detected. (If a warning message is displayed)

Multi-information display Suggestion function

Suggestion functionSuggestion function

Displays suggestions to the driver in the following situations. To select a response to a displayed suggestion, use the meter control switches.

Suggestion to turn off the headlights

If the headlights are left on for a certain amount of time after the power switch has been turned off, if the headlight switch is in the “ AUTO” position, a suggestion message will be displayed asking if you wish to turn the headlights off.

To turn the headlights off, select “ Yes”.

If the driver's door is opened after the power switch is turned off, this suggestion message will not be displayed.

Note:

Customization

Some functions can be customized. (Customizable features)