If the electronic key does not operate properly If communication between the electronic key and vehicle is interrupted (Conditions affecting operation) or the electronic key cannot be used because the battery is depleted, the smart key system and wireless remote control cannot be used. In such cases, the doors can be opened and the engine can be started by following the procedure below. Note: When the electronic key does not work properly Make sure that the smart key system has not been deactivated in the customization setting. If it is off, turn the function on. (Customizable features: Customizable features) Check if battery-saving mode is set. If it is set, cancel the function. (Battery-saving function) The electronic key function may be suspended. (Electronic key battery depletion) Notice: In case of a smart key system malfunction or other key-related problems Take your vehicle with all the electronic keys provided with your vehicle to your Toyota dealer. Locking and unlocking the doors Use the mechanical key (Using the mechanical key) in order to perform the following operations: Locks all the doors Unlocks all the doors Turning the key unlocks the driver’s door. Turning the key again unlocks the other doors. Note: Key linked functions Closes the windows and the panoramic moon roof^* (turn and hold) Opens the windows and the panoramic moon roof^* (turn and hold) These settings must be customized at your Toyota dealer. ^*If equipped Warning: When using the mechanical key and operating the power windows or the panoramic moon roof^{* *}If equipped Operate the power window or the panoramic moon roof after checking to make sure that there is no possibility of any passenger having any of their body parts caught in the window or the panoramic moon roof.Also, do not allow children to operate the mechanical key. It is possible for children and other passengers to get caught in the power window or the panoramic moon roof. Starting the engine Ensure that the shift position is in P and depress the brake pedal. Touch the electronic key to the engine switch. When the electronic key is detected, a buzzer sounds and the engine switch will turn to ON. When the smart key system is deactivated in customization setting, the engine switch will turn to ACC. Firmly depress the brake pedal and check that is shown on the multi-information display. Press the engine switch shortly and firmly. In the event that the engine still cannot be started, contact your Toyota dealer. Note: Stopping the engine Change the shift position to P, set the parking brake, and press the engine switch as you normally do when stopping the engine. Replacing the key battery As the above procedure is a temporary measure, it is recommended that the electronic key battery be replaced immediately when the battery is depleted. (Electronic key battery) If a door is unlocked using the mechanical key when the alarm system is set, the alarm may be triggered. (Triggering of the alarm) Changing engine switch modes Release the brake pedal and press the engine switch in step 3 above. The engine does not start and modes will be changed each time the switch is pressed. (Changing engine switch modes)