Driving position memory^{* *}If equipped This feature automatically adjusts the driver’s seat, outside rear view mirrors and head-up display (if equipped) to make entering and exiting the vehicle easier or to suit your preferences. Up to 2 different driving positions can be recorded. Each electronic key can be registered to recall your preferred driving position. Recording a driving position into memory Check that the shift position is in P. Turn the engine switch to ON. Adjust the driver’s seat, outside rear view mirrors and head-up display (if equipped) to the desired positions. While pressing the “SET” button, or within 3 seconds after the “SET” button is pressed, press button “1” or “2” until the buzzer sounds. If the selected button has already been preset, the previously recorded position will be overwritten. Note: Seat positions that can be memorized (Front seats) The adjusted positions other than the position adjusted by lumbar support switch can be recorded. In order to correctly use the driving position memory function If a seat position is already in the furthest possible position and the seat is operated in the same direction, the recorded position may be slightly different when it is recalled. Warning: Seat adjustment caution Take care during seat adjustment so that the seat does not strike the rear passenger or squeeze your body against the steering wheel. Recalling a driving position Check that the shift position is in P. Turn the engine switch to ON. Press one of the buttons for the driving position you want to recall until the buzzer sounds. Note: To stop the position recall operation part-way through Perform any of the following operations: Press the “SET” button. Press button “1” or “2”. Operate any of the seat adjustment switches (only cancels seat position recall). Jam protection function While the driving position is recalled, if an object is stuck behind the front seat, the front seat will stop and then slightly move forward. When the jam protection function operates, the seat stops at a position other than the set seat position. Check the seat position. Operating the driving position memory after turning the engine switch off Recorded seat positions can be activated up to 180 seconds after the driver’s door is opened and another 60 seconds after it is closed again. When the recorded seat position cannot be recalled The seat position may not be recalled in some situations when the seat position is recorded in a certain range. For details, contact your Toyota dealer. Using the voice control system^{* *}If equipped The following operations can be performed using the voice control system: Driving position registration Driving position recall (only when the shift position is in P) For details, refer to the “MULTIMEDIA OWNER’S MANUAL” Driving position memory Memory recall function Driver’s seat position memory Memory recall function Front seats Memory recall function Registering/canceling/recall a driving position to an electronic key (memory recall function) Identifying a driver with the electronic key assigned and registered in My Settings The driving positions can be automatically recalled for each registered driver by registering electronic key assignments in My Settings. Driving position registration procedure When the shift position is shifted to P after driving the vehicle, the current driving position will be recorded. Driving position recall procedure Carry only the key that has been assigned and registered in My Settings, and then unlock and open the driver’s door using the smart key system or wireless remote control. The driving position other than the head-up display (if equipped) will move to the recorded position. If the driving position is in a position that has already been recorded, the driving position will not move. Turn the engine switch to ON. The head-up display (if equipped) will move to the recorded position. Memory recall function cancelation procedure Initialize the driver registered settings in My Settings. For information on initializing driver registered settings, refer to the “MULTIMEDIA OWNER’S MANUAL”. Identifying a driver with face information assigned and registered in My Settings The driving positions can be automatically recalled for each registered driver by registering face information in the face authentication system and registering the face information assignment in My Settings. Driving position registration procedure When the shift position is shifted to P after driving the vehicle, the current driving position will be recorded. Driving position recall procedure Turn the engine switch to ACC or ON. After face authentication is performed successfully, the seat, outside rear view mirrors and head-up display (if equipped) (only when the engine switch is turned on) will move to the registered driving position. They will not move if already in the registered driving position. Memory recall function cancelation procedure Delete face information from the face authentication system. For information on deleting fingerprint information, refer to the “MULTIMEDIA OWNER’S MANUAL”. Vehicles without a My Settings function Each electronic key can be registered to automatically recall your preferred driving position. Driving position registration procedure Record your driving position to button “1” or “2” before performing the following: Carry only the key you want to register, and then close the driver’s door. If 2 or more keys are in the vehicle, the driving position cannot be recorded properly. Check that the shift position is in P. Turn the engine switch to ON. Recall the driving position that you want to record. While pressing the recalled button, press and hold the door lock switch (either lock or unlock) until the buzzer sounds. If the button could not be registered, the buzzer sounds continuously for approximately 3 seconds. Driving position recall procedure Make sure that the doors are locked before recalling the driving position. Carry the electronic key that has been registered to the driving position, and then unlock and open the driver’s door using the smart key system or wireless remote control. The driving position will move to the recorded position (not including the head-up display [if equipped]). If the driving position is in a position that has already been recorded, the seat and outside rear view mirrors will not move. Turn the engine switch to ON. The head-up display (if equipped) will move to the recorded position. Memory recall function cancelation procedure Carry only the key you want to cancel and then close the driver’s door. If 2 or more keys are in the vehicle, the driving position cannot be canceled properly. Check that the shift position is in P. Turn the engine switch to ON. While pressing the “SET” button, press and hold the door lock switch (either lock or unlock) until the buzzer sounds twice. If it button could not be canceled, the buzzer sounds continuously for approximately 3 seconds. Note: Recalling the driving position using the memory recall function (vehicles with the My setting) Different driving positions can be registered for each electronic key. Therefore, the driving position that is recalled may be different depending on the key being carried. Recalling the driving position using the memory recall function (vehicles without the My setting) Different driving positions can be registered for each electronic key. Therefore, the driving position that is recalled may be different depending on the key being carried. If a door other than the driver’s door is unlocked with the smart key system, the driving position cannot be recalled. In this case, press the driving position button which has been set. Jam protection function While the driving position is recalled, if an object is stuck behind the front seat, the front seat will stop and then slightly move forward. When the jam protection function operates, the seat stops at a position other than the set seat position. Check the seat position. Customization Some functions can be customized. (Customizable features)