Multi-information display (12.3-inch display) Display Content display area A variety of driving-related information can be displayed. The multi-information display can also be used to change display settings and other vehicle settings. Warning or advice pop-up displays are also displayed in certain situations. Driving support system status display area Displays a contracted display of the driving support system status when not selected for the multi-information display, while any of the following systems are operating: PCS (Pre-Collision System) (PCS (Pre-Collision System)) LTA (Lane Tracing Assist) (LTA (Lane Tracing Assist)) LDA (Lane Departure Alert) (LDA (Lane Departure Alert)) LCA (Lane Change Assist) (if equipped) (LCA (Lane Change Assist)*) Dynamic radar cruise control (Dynamic radar cruise control) Cruise control (Cruise control) PDA (Proactive Driving Assist) (PDA (Proactive driving assist)) Note: Liquid crystal display Small spots or light spots may appear on the display. This phenomenon is characteristic of liquid crystal displays, and there is no problem continuing to use the display. Warning: Caution for use while driving When operating the multi-information display while driving, pay extra attention to the safety of the area around the vehicle. Do not look continuously at the multi-information display while driving as you may fail to see pedestrians, objects on the road, etc. ahead of the vehicle. The information display at low temperatures The information display at low temperatures Switches Meter control switches Multi-information display Meter control switches Meter Meter control switches Steering wheel Meter control switches Changing the meter display Meter control switch The multi-information display is operated using the meter control switches. / : Select multi-information display / : Change displayed content, scroll up/down the screen and move the cursor up/down Press: Enter/SetPress and hold: Reset/Display customizable items Return to the previous screen Call sending/receiving and history display Linked with the hands-free system, sending or receiving call is displayed. For details regarding the hands-free system, refer to the “MULTIMEDIA OWNER’S MANUAL”. Changing meter pages Press the or meter control switch to change the meter page. Content of multi-information display (Center) Display contents Driving support system information display Navigation system-linked display Settings Warning message (If a warning message is displayed) Blank Changing contents in a page Select the desired content on the page’s setting mode display. Press the or meter control switch to select a page. To enable page edit, press and hold the meter control switch. Press the or meter control switch to select a display to be changed. Press or meter control switch to select a content. When the setting is complete, press . Multi-information display Driving support system information display Driving support system information display Multi-information display Navigation system-linked display Navigation system-linked displayDriving support system information display Select to display the operational status of the following systems: PCS (Pre-Collision System) (PCS (Pre-Collision System)) LTA (Lane Tracing Assist) (LTA (Lane Tracing Assist)) LDA (Lane Departure Alert) (LDA (Lane Departure Alert)) LCA (Lane Change Assist) (if equipped) (LCA (Lane Change Assist)*) Dynamic radar cruise control (Dynamic radar cruise control) Cruise control (Cruise control) PDA (Proactive Driving Assist) (PDA (Proactive driving assist)) Navigation system-linked display Select to display the following navigation system-linked information: Route guidance to destination Street name Settings The meter display settings can be changed in . Stop light indicator Select to enable/disable the stop light indicator. Language Select to change the language displayed. Units Select to change the units of measure displayed. Meter Type Select to change the meter type. Meter Style Select to change the meter style. Dial Type 1 dial: Select to change the display of the speedometer or tachometer. Eco Driving Indicator Light Select to enable/disable the Eco Driving Indicator Light. Fuel Economy Select to set the display of the fuel economy. Drive Info Items Select to change the display of the drive information. TRIP A/B Items Select to change the display of the drive information of TRIP A/B. Pop-up display Select to enable/disable pop-up displays for each relevant system. Default settings Select to reset the meter display settings to the default setting. Vehicle functions and settings that can be changed in Customizable features Note: Street name display Only street names which are included in the map data will be displayed. Suspension of the settings display Some settings cannot be changed while driving. When changing settings, park the vehicle in a safe place. If a warning message is displayed, operation of the settings display will be suspended. Warning: Cautions during setting up the display If the engine is running when changing the display settings, ensure that the vehicle is parked in a place with adequate ventilation. In a closed area such as a garage, exhaust gases including harmful carbon monoxide (CO) may collect and enter the vehicle. This may lead to death or a serious health hazard. Notice: During setting up the display To prevent battery discharge, ensure that the engine is running while setting up the display features. Content of multi-information display (Side) Display contents (Side) Blank Fuel economy Eco Driving Indicator Driving support system information display (Driving support system information display) Navigation system-linked display Audio system-linked display Drive information Drive information of Trip A/B Tire Pressure (Tire pressure warning system) AWD operation status display (AWD models) Changing contents in a page Changing contents in a page Changing contents to be displayed on the side multi-information displays Press the or meter control switch to select a page. To enable page edit, press and hold the meter control switch. Press the or meter control switch to select the desired side multi-information display to be changed. Press the or meter control switch for the side that is displayed to move to a content list screen that enables to select display/not display each items. Press or meter control switch to select a content and select to set for display/not display the item. Multi-information display Fuel economy Fuel economy Current fuel consumption Average fuel economy Driving range Fuel consumption Current fuel consumption Fuel consumption Average fuel economy Fuel economy Use the displayed values as a reference only. Current fuel consumption Displays instantaneous current fuel consumption. Average fuel economy The average fuel economy display can be changed in . (Settings) Average fuel economy (after start) Displays the average fuel consumption since engine start. Average fuel economy (after reset) Displays average fuel consumption since display was reset. To reset the average fuel economy display, press and hold the meter control switch. Multi-information display Eco Driving Indicator Eco Driving Indicator Eco Driving Indicator LightEco Driving Indicator Eco Driving Indicator Light During Eco-friendly acceleration (Eco driving), the Eco Driving Indicator Light will turn on. When the acceleration exceeds the Zone of Eco driving, or when the vehicle is stopped, the light turns off. Eco Driving Indicator Zone Display Suggests the Zone of Eco driving with current Eco driving ratio based on acceleration. Eco driving ratio based on acceleration If the acceleration exceeds the Zone of Eco driving, the right side of the Eco Driving Indicator Zone Display will illuminate. At this time, the Eco Driving Indicator Light will turn off. Zone of Eco driving Navigation system-linked display Select to display the following navigation system-linked information: Route guidance to destination Compass display Multi-information display Audio system-linked display Audio system-linked displayAudio system-linked display Displays the audio source or track. Drive information Drive information 1 Drive information 2 Displays the following depending on which drive information type and drive information items were selected in . (Settings) Average speed: Displays the average vehicle speed since engine start Trip distance: Displays the distance driven since engine start Trip time: Displays the elapsed time since engine start Drive information of TRIP A/B Drive information of trip A/B 1 Drive information of trip A/B 2 Displays the following depending on which drive information type and drive information items were selected in . (Settings) Average speed: Displays the average vehicle speed of trip A/B Trip distance: Displays the distance driven of trip A/B Trip time: Displays the elapsed time of trip A/B AWD operation status display (AWD models) The illustration used is intended as an example, and may differ from the image that is actually displayed on the multi-information display. Torque distribution display Displays the drive status of each wheel in 6 steps from 0 to 5. Note: Eco Driving Indicator Eco Driving Indicator will not operate under the following conditions: The shift lever is in any position other than D. The driving mode is set to sport mode. The vehicle speed is approximately 80 mph (130 km/h) or higher. Multi-information display Suggestion function Suggestion functionSuggestion function Displays suggestions to the driver in the following situations. To select a response to a displayed suggestion, use the meter control switches. Suggestion to enable the power back door If the power back door system is disabled (setting on the multi-information display set to off) and the power back door switch on the instrument panel is operated, a suggestion message will be displayed asking if you wish to enable the power back door system. To enable the power back door system, select “Yes”. After enabling the power back door system, press the power back door switch again to open or close the power back door. Note: Customization Some functions can be customized. (Customizable features)