Head restraints Head restraints are provided for all seats. Warning: Head restraint precautions Observe the following precautions regarding the head restraints. Failure to do so may result in death or serious injury. Use the head restraints designed for each respective seat. Adjust the head restraints to the correct position at all times. After adjusting the head restraints, push down on them and make sure they are locked in position. Do not drive with the head restraints removed. Adjusting a head restraint Front seats Up Pull the head restraints up. Down Push the head restraint down while pressing the lock release button . Second seats Up Pull the head restraints up. Down Push the head restraint down while pressing the lock release button . Third center seat Up Pull the head restraints up. Down Push the head restraint down while pressing the lock release button . Note: Adjusting the height of the head restraints Make sure that the head restraints are adjusted so that the center of the head restraint is closest to the top of your ears. Adjusting the third center seat head restraint Always raise the head restraint one level from the stowed position when using. When using the outboard third seats If a head restraint is folded forward, make sure to return it to the upright position. (Returning the third seats) Removing the head restraints Pull the head restraint up while pressing the lock release button . If the head restraint touches the ceiling, making the removal difficult, change the seat height or angle. (Front seats, Rear seats) Front seats Second seats Third center seat Installing the head restraints Align the head restraint with the installation holes and push it down to the lock position. Press and hold the lock release button when lowering the head restraint. Front seats Second seats Third center seat