Multi-terrain Select*

Multi-terrain Select^*

If equipped

Multi-terrain Select is a system that improves drivability in off-road situations.

Select a mode that most closely matches the type of terrain on which you are driving from several modes.

Brake control, steering feel and drive force control can be optimized in accordance with the selected mode.

Warning:

When using the Multi-terrain Select

Observe the following precautions to avoid an accident that could result in death or serious injuries:

Check that the selected mode indicators are illuminated before driving. Multi-terrain Select will not operate when the indicators are off.

The road conditions listed (Switching modes) are for reference only. There is a chance that the function may not be the most appropriate in terms of road conditions such as pitch, slipperiness, undulation, etc. Thoroughly check the road conditions before driving.

Multi-terrain Select is not intended to expand the limits of the vehicle. Check the road conditions thoroughly beforehand, and drive safely and carefully.

Notice:

Precaution for use

The Multi-terrain Select is intended for use during off-road driving. Do not use the system at any other time.

Switches MTS switch

Switches Mode select switch System components

“ MTS” switch

Mode select switch

Multi-information display

Selected mode is displayed.

Switching modes

Press the “ MTS” switch.

The indicator on the switch will turn on.

Select the Multi-terrain Select modes on the multi-information display while turning the mode select switch left and right.

Depending on the positions of the front-wheel drive control switch, a mode can be selected from among the following modes.

Front-wheel drive control switch is in “ 4L”


Mode		Road Conditions
	“ MOGUL”	Suitable for bumpy roads with large inclines
	“ SAND”	Suitable for sandy roads and other slippery conditions
	“ MUD”	Suitable for muddy roads and other slippery conditions
	“ ROCK”	Suitable for rocky terrain

If the brake control has activated, the slip indicator light will flash.

Front-wheel drive control switch is in “ 4H”


Mode		Road Conditions
	“ DIRT”	Suitable for bumpy road conditions, such as dirt roads
	“ SAND”	Suitable for sandy roads and other slippery conditions
	“ MUD”	Suitable for muddy roads and other slippery conditions
	“ DEEP SNOW”	Suitable for deep snow roads

If the brake control has activated, the slip indicator light will flash.

When the vehicle is in “ SAND”, “ MUD” or “ DEEP SNOW” mode, VSC is automatically turned off. (VSC OFF indicator light come on.)

Note:

Multi-terrain Select

Multi-terrain Select controls the vehicle so that it can maximize the drive force and improve drivability on rough roads. As a result, fuel efficiency may diminish when compared to driving in normal mode.

Automatic system cancelation

In the following situations, Multi-terrain Select will be canceled automatically.

When the engine switch is turned off

When the front-wheel drive control switch is in “ 2H”

When “ TOW HAUL” mode and “ TOW+” mode is selected while the front-wheel drive control switch is in “ 4H”

When drive mode select is selected while the front-wheel drive control switch is in “ 4H”

Turning off Multi-terrain Select

Performing the following turns Multi-terrain Select off, and then the display on the multi-information display will disappear.

When the “ MTS” switch indicator is illuminated

Press the “ MTS” switch while the system is in operation.

When the “ MTS” switch indicator is not illuminated

Press the “ MTS” switch to turn the indicator on.

Press the “ MTS” switch again with the Multi-terrain Select indicator illuminated.

When the vehicle is stuck

Switching the transfer and differential For the operation of the following functions, refer to the following pages. (If equipped)

Four-wheel drive system (Four-wheel drive system*)

Rear differential lock (Rear differential lock system*)

Driving in Multi-terrain Select

The following types of situations may occur, but they are not malfunctions.

Vibrations may be felt throughout the vehicle or steering wheel.

Operating noise may be heard from the engine compartment.

When an inspection at your Toyota dealer is necessary

In the following situations, the system may be malfunctioning. Have the vehicle inspected by your Toyota dealer immediately.

When the slip indicator light illuminates.

When the indicator for each mode does not illuminate on the multi-information display even though Multi-terrain Select is selected.