Outside rear view mirrors The rear view mirror’s position can be adjusted to change the rear view. Note: When using the outside rear view mirrors in a cold weather When it is cold and the outside rear view mirrors are frozen, it may not be possible to fold/extend them or adjust the mirror surface. Remove the ice, snow, etc. covering the outside rear view mirrors. Warning: Important points while driving Observe the following precautions while driving.Failure to do so may result in loss of control of the vehicle and cause an accident, resulting in death or serious injury. Do not adjust the mirrors while driving. Do not drive with the mirrors folded. Both the driver and passenger side mirrors must be unfolded and properly adjusted before driving. Outside rear view mirrors Adjustment Side mirrors Adjustment Adjustment procedure Type A To select a mirror to adjust, turn the switch. Left Right To adjust the mirror, operate the switch. Up Right Down Left Type B Upper part mirror: To select a mirror to adjust, turn the switch. Left Right To adjust the mirror, operate the switch. Up Right Down Left Lower part mirror: Adjust the mirror up and down, in or out by pushing the mirror surface. Note: Mirror angle can be adjusted when The engine switch is in ACC or ON. Defogging the mirrors The outside rear view mirrors can be cleared using the mirror defoggers. Turn on the rear window defogger to turn on the outside rear view mirror defoggers. (Defogging the rear window and outside rear view mirrors) Automatic adjustment of the mirror angle (if equipped) A desired mirror face angle can be entered to memory and recalled automatically by the driving position memory. (Driving position memory*) Auto anti-glare function^* (if equipped) ^*Standard type mirror has auto anti-glare function (left side only).Extending type mirrors have auto anti-glare function (left and right side). When the anti-glare inside rear view mirror is set to automatic mode, the outside rear view mirrors will activate in conjunction with the anti-glare inside rear view mirror to reduce reflected light. (Anti-glare function) Warning: When the mirror defoggers are operating Do not touch the rear view mirror surfaces, as they can become very hot and burn you. Outside rear view mirrors Folding Side mirrors Folding Folding and unfolding the mirrors From outside Push the mirror back in the direction of the vehicle’s rear. From inside (if equipped) Folds the mirrors Unfolds the mirrors Putting the switch in the neutral position sets the mirrors to automatic mode. Automatic mode allows the folding or unfolding of the mirrors to be linked to locking/unlocking of the doors. Note: Using automatic mode in cold weather When automatic mode is used in cold weather, the door mirror could freeze up and automatic stowing and return may not be possible. In this case, remove any ice and snow from the door mirror, then either operate the mirror using manual mode or move the mirror by hand. Customization Some functions can be customized. (Customizable features) Warning: When a mirror is moving To avoid personal injury and mirror malfunction, be careful not to get your hand caught by the moving mirror. Switches Outer mirror extend switch Extending the mirrors (if equipped) The mirror can be deployed to the outer side in order to improve rear visibility when towing a wide trailer. Press the switch and extend the mirror. Press the switch again to return the mirror to the original position. Note: Using the extending mirrors in cold weather The door mirror extending & retracting functions could freeze up and extending or retracting may not be possible. In this case, remove any ice and snow from the mirror, then either operate the mirror by pressing the extend or retract switch or move the mirror by hand. Recommended mirror angle when towing a trailer (vehicles with extending mirrors) Power adjust the upper part of the mirror until an appropriate view is obtained. It is recommended that the outer 2/3 of the upper mirror be filled with images other than the vehicle and trailer. Manually adjust the lower part of the mirror until an appropriate view of the towed object is obtained. It is recommended that the outer 2/3 of the lower mirror be filled with images other than the trailer. Linked mirror function when reversing (if equipped) When either “ L” or “ R” of the mirror select switch is selected, the outside rear view mirrors will automatically angle downwards when the vehicle is reversing in order to give a better view of the ground.To disable this function, select neither “ L” nor “ R”. Adjusting the mirror angle when the vehicle is reversing With the shift lever in R, adjust the mirror angle at a desired position.The adjusted angle will be memorized and the mirror will automatically tilt to the memorized angle whenever the shift lever is shifted to R from next time. The memorized downward tilt position of the mirror is linked to the normal position (angle adjusted with the shift position in other than R). Therefore, if the normal position is changed after adjustment, the tilt position will also change.When the normal position is changed, readjust the angle in reversing. Switches Trailering light switch Lights Trailering light Trailering light (if equipped) Improves reverse operation for trailer parking by turning on the outer mirror lights at night. These lights can be used as work lights. When the shift lever is in P or R, press the switch. Note: Automatic light off system The lights will automatically turn off when any of the following conditions are satisfied: When the shift lever is in N or D When the outer mirror is folded (Folding and unfolding the mirrors)