Multi-information display

The multi-information display is used to display fuel efficiency related information and various types of driving-related information. The multi-information display can also be used to change the display settings and other settings.

Display and menu icons

Display

4.2-inch display type

Driving support system status display area

Displays an image when the following systems are operating and a menu icon other than is selected:

LTA (Lane Tracing Assist) (if equipped) (LTA (Lane Tracing Assist)*)

Dynamic radar cruise control with full-speed range (if equipped) (Dynamic radar cruise control with full-speed range*)

RSA (Road Sign Assist) (if equipped) (RSA (Road Sign Assist)*)

Content display area

By selecting menu icons on the multi-information display, a variety of driving-related information can be displayed. The multi-information display can also be used to change display settings and other vehicle settings.

Warning or advice pop-up displays are also displayed in certain situations.

Full LCD type

Content display area

Warning or advice pop-up displays are also displayed in certain situations.

Driving support system status display area

LTA (Lane Tracing Assist) (LTA (Lane Tracing Assist)*)

Dynamic radar cruise control with full-speed range (Dynamic radar cruise control with full-speed range*)

RSA (Road Sign Assist) (if equipped) (RSA (Road Sign Assist)*)

Multi-information display Menu icons

Menu iconsMenu icons

The menu icons will be displayed by pressing the or meter control switch.

4.2-inch display type


	Driving information display (Content of driving information)
	Driving support system information display (Driving support system information display (4.2-inch display type only))
	Audio system-linked display (Audio system-linked display)
	Vehicle information display (Vehicle information display)
	Settings display (Settings display)
	Warning message display (Warning message display)

Full LCD type


	Driving information display (Content of driving information)
	Navigation system-linked display (Navigation system-linked display (full LCD type only))
	Audio system-linked display (Audio system-linked display)
	Vehicle information display (Vehicle information display)
	Settings display (Settings display)
	Warning message display (Warning message display)

Note:

Liquid crystal display

Small spots or light spots may appear on the display. This phenomenon is characteristic of liquid crystal displays, and there is no problem continuing to use the display.

Meter Meter control switches

Meter control switches

Multi-information display Changing the display

Multi-information display Meter control switches

Steering wheel Meter control switches

Switches Meter control switches Changing the display

The multi-information display is operated using the meter control switches.

Scroll the screen^*/switch the display^*/move the cursor

Press: Enter/SetPress and hold: Reset/Display customizable items

Return to the previous screen

Call sending/receiving and history display

Linked with the hands-free system, sending or receiving call is displayed. For details regarding the hands-free system, refer to the “ MULTIMEDIA OWNER’S MANUAL”.

On screens where the screen can be scrolled and the display can be switched, a scroll bar or a round icon that shows the number of registered screens is displayed.

Warning:

Caution for use while driving

For safety, avoid operating the meter control switch while driving as much as possible, and do not look continuously at the multi-information display while driving. Stop the vehicle and operate the meter control switch. Failure to do so may cause a steering wheel operation error, resulting in an unexpected accident.

Multi-information display Driving information display

Driving information displayContent of driving information

Select to display fuel consumption data in various forms.

Speedometer display/Distance to empty (4.2-inch display type only)

Speedometer display

Displays the vehicle speed.

Distance to empty

Displays the driving range with remaining fuel. (Distance to empty)

Multi-information display Fuel economy

Fuel economy

Current fuel consumption

Average fuel economy

Driving range

Fuel consumption Current fuel consumption

Fuel consumption Average fuel economy Fuel economy

Use the displayed values as a reference only.

Distance to empty

Displays the driving range with remaining fuel. (Distance to empty)

Current fuel consumption

Displays instantaneous current fuel consumption.

Average fuel economy (after reset)

To reset the average fuel economy display, press and hold the meter control switch.

The average fuel economy display can be changed in . (Settings display)

Average fuel economy (after start)

Displays the average fuel consumption since engine start.

Average fuel economy (after refuel)

Displays the average fuel consumption since the vehicle was refueled.

Multi-information display Eco Driving Indicator

Eco Driving IndicatorEco Driving Indicator/Distance to empty

Eco Driving Indicator

Eco Driving Indicator Zone Display

Suggests the Zone of Eco driving with current Eco driving ratio based on acceleration.

Eco driving ratio based on acceleration

If the acceleration exceeds the Zone of Eco driving, the right side of the Eco Driving Indicator Zone Display will illuminate.

Zone of Eco driving

Distance to empty

Displays the driving range with remaining fuel. (Distance to empty)

Note:

Distance to empty

This distance is computed based on your average fuel consumption. As a result, the actual distance that can be driven may differ from that displayed.

When only a small amount of fuel is added to the tank, the display may not be updated. When refueling, turn the engine switch to OFF. If the vehicle is refueled without turning the engine switch to OFF, the display may not be updated.

When “ Refuel” is displayed, the remaining fuel amount is low and the distance that can be driven with the remaining fuel cannot be calculated. Refuel immediately.

Multi-information display Driving support system information display

Driving support system information display

Multi-information display Navigation system-linked display

Navigation system-linked displayDriving support system information display (4.2-inch display type only)

Driving support system information

Select to display the operational status of the following systems:

LTA (Lane Tracing Assist) (if equipped) (LTA (Lane Tracing Assist)*)

Dynamic radar cruise control with full-speed range (if equipped) (Dynamic radar cruise control with full-speed range*)

Navigation system-linked display

Select to display the following navigation system-linked information:

Route guidance to destination

Compass display (heading-up display)

Multi-information display Navigation system-linked display

Navigation system-linked displayNavigation system-linked display (full LCD type only)

Select to display the following navigation system-linked information:

Route guidance to destination

Compass display (heading-up display)

Multi-information display Audio system-linked display

Audio system-linked displayAudio system-linked display

Select to enable selection of an audio source or track on the meter using the meter control switches.

This menu icon can be set to be displayed/not displayed in .

Multi-information display Vehicle information display

Drive information

Vehicle information display

Average vehicle speed

Elapsed time

Drive distance

Meter Pitch and roll gauges

Pitch and roll gaugesVehicle information display

Trailer brake

Displays trailer brake control status (Trailer brake controller*) and trailer type^*.

To select the trailer, press and hold the meter control switch. (Changing settings of the trailer type)

Trailer Mode BSM

Displays trailer length^* and trailer blind spot status (BSM (Blind Spot Monitor)*).

To select the trailer, press and hold the meter control switch. (Changing settings of the trailer type)

Pitch and roll gauges (4.2-inch display type only)

Displays the longitudinal and lateral inclination of the vehicle

Drive information

2 items that are selected using the “ Drive Info Items” setting (average speed, distance and total time) can be displayed vertically.

The displayed information changes according to the “ Drive Info Type” setting (since the system was started or between resets). (Settings display)

Use the displayed information as a reference only.

Following items will be displayed.

“ Trip”

“ Average Speed”: Displays the average vehicle speed since engine start^*

“ Distance”: Displays the distance driven since engine start^*

“ Total Time”: Displays the elapsed time since engine start^*

These items are reset each time the engine stops.

“ Total”

“ Average Speed”: Displays the average vehicle speed since the display was reset^*

“ Distance”: Displays the distance driven since the display was reset^*

“ Total Time”: Displays the elapsed time since the display was reset^*

To reset, display the desired item and press and hold the meter control switch.

Tire inflation pressure

Displays inflation pressure of each tire.

Multi-information display Settings

Meter Settings

Language (multi-information display)Settings display

Meter display settings that can be changed

Language

Select to change the language displayed.

Units

Select to change the units of measure displayed.

Meter Type (full LCD type only)

Select to change the main dial type to speedometer or tachometer.

/ (Driving information display settings)

Fuel economy display

Select to change the average fuel consumption display between after start/after reset/after refuel. (Fuel economy)

/ (Audio settings)

Select to display/not display the audio system linked display.

/ (Vehicle information display settings)

Select to change the displayed content of the following:

Drive information type

Select to change the drive information type display between after start/after reset.

Drive information items

Select to set the first and second items of the drive information display to any of the following: average vehicle speed/distance/elapsed time.

Pop-up display

Select to enable/disable pop-up displays for each relevant system.

Multi-information display off

Select to turn the multi-information display off.

To turn the multi-information display on again, press any of the meter control switches.

Default setting

Select to reset the meter display settings to the default setting.

Multi-information display Trailer settings

Trailer settings

Trailer towing Trailer settings

Towing Trailer settings

BSM (Blind Spot Monitor) Trailer settings

Blind Spot Monitor (BSM) Trailer settings

Trailer brake controller Trailer settings Changing settings of the trailer type

Trailer settings screen

Displays the name of the currently selected trailer or “ No Trailer Selected” if a trailer has not yet been selected

Add a new trailer or select an existing saved trailer

Maximum of 10 trailers can be saved.

Select the trailer name, length, hitch type, brake type and number of axles.

The parameters which can be set depend on which of the trailer systems are installed on the vehicle. (Trailer Brake Controller, Trailer Backup Guide and Trailer Mode BSM)

Deselect the currently selected trailer

Used when a 4-pin trailer connector has been disconnected. (4-pin trailer connector disconnection cannot be automatically detected by Trailer Brake Controller)

Edit the parameters of a saved trailer (name, length, hitch type, brake type and number of axles)

The parameters which can be edited depend on which of the trailer systems are installed on the vehicle (Trailer Brake Controller, Trailer Backup Guide and Trailer Mode BSM)

Delete a saved trailer

Trailer detail screen

Displays the name of the current trailer which is being added or edited.

Change the name of the trailer.

Change the hitch type of the trailer between ball hitch (conventional), gooseneck or fifth wheel. Note that gooseneck and fifth wheel trailers are not supported for some features (Trailer Backup Guide and Trailer Mode BSM)

Change the length of the trailer. If the exact length is not listed, round up the actual length of the trailer to the closest available value.

“ Auto” length detection can also be selected.

Change the number of axles.

Change the brake type (electric or electric over hydraulic) and weight of the trailer, or turn trailer brakes off for that trailer.

Save the trailer information

If there are any errors with the trailer values, re-select the value or delete and re-save the trailer. If the error continues, contact your Toyota dealer.

Vehicle functions and settings that can be changed

Customizable features

Note:

Suspension of the settings display

Some settings cannot be changed while driving. When changing settings, park the vehicle in a safe place.

If a warning message is displayed, operation of the settings display will be suspended.

Warning:

Cautions during setting up the display

If the engine is running when changing the display settings, ensure that the vehicle is parked in a place with adequate ventilation. In a closed area such as a garage, exhaust gases including harmful carbon monoxide (CO) may collect and enter the vehicle. This may lead to death or a serious health hazard.

Notice:

During setting up the display

To prevent battery discharge, ensure that the engine is running while setting up the display features.

Warning message display

Select to display warning messages and measures to be taken if a malfunction is detected. (If a warning message is displayed)

Multi-information display Stop & Start system information

Stop & Start system information display

Stop & Start system System information display Stop & Start system information

Stop & Start system operation time (after start)/status notification

Displays the current amount of time the engine has been stopped by the operation of the Stop & Start system.Also shows the status of the Stop & Start system with a pop-up display. (Multi-information display messages)

Stop & Start system settings

The length of time of the Stop & Start system will operate when the “ A/C” switch of the air conditioning system is on can be set to 2 different levels in of the multi-information display. (Changing the idling stop time with the air conditioning system on)