Multi-information display The multi-information display is used to display fuel efficiency related information and various types of driving-related information. The multi-information display can also be used to change the display settings and other settings. Display and menu icons Display Content display area By selecting menu icons on the multi-information display, a variety of driving-related information can be displayed. The multi-information display can also be used to change display settings and other vehicle settings. Warning or advice pop-up displays are also displayed in certain situations. Driving support system status display area LTA (Lane Tracing Assist) (LTA (Lane Tracing Assist)) Dynamic radar cruise control with full-speed range (Dynamic radar cruise control with full-speed range) RSA (Road Sign Assist) (if equipped) (RSA (Road Sign Assist)*) Multi-information display Menu icons Menu iconsMenu icons The menu icons will be displayed by pressing the or meter control switch.

	Driving information display (Content of driving information)
	Navigation system-linked display (Navigation system-linked display)
	Audio system-linked display (Audio system-linked display)
	Vehicle information display (Vehicle information display)
	Settings display (Settings display)
	Warning message display (Warning message display)

Note: Liquid crystal display Small spots or light spots may appear on the display. This phenomenon is characteristic of liquid crystal displays, and there is no problem continuing to use the display. Meter Meter control switches Meter control switches Multi-information display Changing the display Multi-information display Meter control switches Steering wheel Meter control switches Switches Meter control switches Changing the display The multi-information display is operated using the meter control switches. Scroll the screen^*/switch the display^*/move the cursor Press: Enter/SetPress and hold: Reset/Display customizable items Return to the previous screen Call sending/receiving and history display Linked with the hands-free system, sending or receiving call is displayed. For details regarding the hands-free system, refer to the “ MULTIMEDIA OWNER’S MANUAL”. ^*On screens where the screen can be scrolled and the display can be switched, a scroll bar or a round icon that shows the number of registered screens is displayed. Warning: Caution for use while driving For safety, avoid operating the meter control switch while driving as much as possible, and do not look continuously at the multi-information display while driving. Stop the vehicle and operate the meter control switch. Failure to do so may cause a steering wheel operation error, resulting in an unexpected accident. Multi-information display Driving information display Driving information displayContent of driving information Select to display fuel consumption data in various forms. Multi-information display Fuel economy Fuel economy Current fuel consumption Average fuel economy Driving range Fuel consumption Current fuel consumption Fuel consumption Average fuel economy Fuel economy Use the displayed values as a reference only. Distance to empty Displays the driving range with remaining fuel. (Distance to empty) Current fuel consumption Displays instantaneous current fuel consumption. Average fuel economy (after reset) To reset the average fuel economy display, press and hold the meter control switch. The average fuel economy display can be changed in . (Settings display) Average fuel economy (after start) Displays the average fuel consumption since hybrid system start. Average fuel economy (after refuel) Displays the average fuel consumption since the vehicle was refueled. Multi-information display Hybrid System Indicator Hybrid System IndicatorHybrid System Indicator/Distance to empty Hybrid System Indicator Hybrid Eco area Shows that gasoline engine power is not being used very often. The gasoline engine will automatically stop and restart under various conditions. Eco area Shows that the vehicle is being driven in an Eco-friendly manner. By keeping the indicator needle within the Eco area, more Eco-friendly driving can be achieved. Power area Shows that an Eco-friendly driving range is being exceeded (during full power driving etc.) Distance to empty Displays the driving range with remaining fuel. (Distance to empty) Note: Distance to empty This distance is computed based on your average fuel consumption. As a result, the actual distance that can be driven may differ from that displayed. When only a small amount of fuel is added to the tank, the display may not be updated. When refueling, turn the power switch to OFF. If the vehicle is refueled without turning the power switch to OFF, the display may not be updated. When “ Refuel” is displayed, the remaining fuel amount is low and the distance that can be driven with the remaining fuel cannot be calculated. Refuel immediately. Hybrid System Indicator The Hybrid System Indicator will not operate in the following situations: The “ READY” indicator is not illuminated. The shift lever is in a range other than D or S. Multi-information display Navigation system-linked display Navigation system-linked displayNavigation system-linked display Select to display the following navigation system-linked information: Route guidance to destination Compass display (heading-up display) Multi-information display Audio system-linked display Audio system-linked displayAudio system-linked display Select to enable selection of an audio source or track on the meter using the meter control switches. This menu icon can be set to be displayed/not displayed in . Multi-information display Vehicle information display Drive information Vehicle information display Average vehicle speed Elapsed time Drive distanceVehicle information display Trailer brake Displays trailer brake control status (Trailer brake controller*) and trailer type^*. ^*To select the trailer, press and hold the meter control switch. (Changing settings of the trailer type) Trailer Mode BSM Displays trailer length^* and trailer blind spot status (BSM (Blind Spot Monitor)). ^*To select the trailer, press and hold the meter control switch. (Changing settings of the trailer type) Drive information 2 items that are selected using the “ Drive Info Items” setting (average speed, distance and total time) can be displayed vertically. The displayed information changes according to the “ Drive Info Type” setting (since the system was started or between resets). (Settings display) Use the displayed information as a reference only. Following items will be displayed. “ Trip” “ Average Speed”: Displays the average vehicle speed since hybrid system start^* “ Distance”: Displays the distance driven since hybrid system start^* “ Total Time”: Displays the elapsed time since hybrid system start^{* *}These items are reset each time the hybrid system stops. “ Total” “ Average Speed”: Displays the average vehicle speed since the display was reset^* “ Distance”: Displays the distance driven since the display was reset^* “ Total Time”: Displays the elapsed time since the display was reset^{* *}To reset, display the desired item and press and hold the meter control switch. Tire inflation pressure Displays inflation pressure of each tire. Multi-information display Settings Meter Settings Language (multi-information display)Settings display Meter display settings that can be changed Language Select to change the language displayed. Units Select to change the units of measure displayed. Meter Type Select to change the main dial type to speedometer or tachometer. (Driving information display settings) Fuel economy display Select to change the average fuel consumption display between after start/after reset/after refuel. (Fuel economy) (Audio settings) Select to display/not display the audio system linked display. (Vehicle information display settings) Select to change the displayed content of the following: Drive information type Select to change the drive information type display between after start/after reset. Drive information items Select to set the first and second items of the drive information display to any of the following: average vehicle speed/distance/elapsed time. Pop-up display Select to enable/disable pop-up displays for each relevant system. Multi-information display off Select to turn the multi-information display off. To turn the multi-information display on again, press any of the meter control switches. Default setting Select to reset the meter display settings to the default setting. Multi-information display Trailer settings Trailer settings Trailer towing Trailer settings Towing Trailer settings BSM (Blind Spot Monitor) Trailer settings Blind Spot Monitor (BSM) Trailer settings Trailer brake controller Trailer settings Changing settings of the trailer type Trailer settings screen Displays the name of the currently selected trailer or “ No Trailer Selected” if a trailer has not yet been selected Add a new trailer or select an existing saved trailer Maximum of 10 trailers can be saved. Select the trailer name, length, hitch type, brake type and number of axles. The parameters which can be set depend on which of the trailer systems are installed on the vehicle. (Trailer Brake Controller, Trailer Backup Guide and Trailer Mode BSM) Deselect the currently selected trailer Used when a 4-pin trailer connector has been disconnected. (4-pin trailer connector disconnection cannot be automatically detected by Trailer Brake Controller) Edit the parameters of a saved trailer (name, length, hitch type, brake type and number of axles) The parameters which can be edited depend on which of the trailer systems are installed on the vehicle (Trailer Brake Controller, Trailer Backup Guide and Trailer Mode BSM) Delete a saved trailer Trailer detail screen Displays the name of the current trailer which is being added or edited. Change the name of the trailer. Change the hitch type of the trailer between ball hitch (conventional), gooseneck or fifth wheel. Note that gooseneck and fifth wheel trailers are not supported for some features (Trailer Backup Guide and Trailer Mode BSM) Change the length of the trailer. If the exact length is not listed, round up the actual length of the trailer to the closest available value. “ Auto” length detection can also be selected. Change the number of axles. Change the brake type (electric or electric over hydraulic) and weight of the trailer, or turn trailer brakes off for that trailer. Save the trailer information If there are any errors with the trailer values, re-select the value or delete and re-save the trailer. If the error continues, contact your Toyota dealer. Vehicle functions and settings that can be changed Customizable features Note: Suspension of the settings display Some settings cannot be changed while driving. When changing settings, park the vehicle in a safe place. If a warning message is displayed, operation of the settings display will be suspended. Warning: Cautions during setting up the display If the hybrid system is operating when changing the display settings, ensure that the vehicle is parked in a place with adequate ventilation. In a closed area such as a garage, exhaust gases including harmful carbon monoxide (CO) may collect and enter the vehicle. This may lead to death or a serious health hazard. Notice: During setting up the display To prevent 12-volt battery discharge, ensure that the hybrid system is operating while setting up the display features. Warning message display Select to display warning messages and measures to be taken if a malfunction is detected. (If a warning message is displayed)