Gauges and meters (4.2-inch display type) The meters display various drive information. Outside temperature Speedometer Meter Clock Clock Fuel Fuel gauge Fuel gauge Engine coolant temperature gauge Meter Voltmeter Voltmeter Meter Engine oil pressure gauge Engine oil pressure gaugeMeter display The units used on the meter and display may differ depending on the target region. Tachometer Displays the engine speed in revolutions per minute Engine oil pressure gauge Displays the engine oil pressure Outside temperature (Outside temperature display) Clock (Clock settings screen) Time displayed is linked to the multimedia system. For details, refer to “ MULTIMEDIA OWNER’S MANUAL”. Voltmeter Displays the charge state Speedometer Displays the vehicle speed Fuel gauge Displays the quantity of fuel remaining in the tank Odometer and trip meter (Odometer and trip meter display) Shift position and shift range display Displays the selected shift position or selected shift range (Shift position purpose and functions) Multi-information display Presents the driver with a variety of driving-related data (Multi-information display) Displays warning messages if a malfunction occurs (If a warning message is displayed) Engine coolant temperature gauge Displays the engine coolant temperature Note: The meters and display illuminate when The engine switch is in ON. Clock settings screen If clock setting item is displayed when is selected on the multi-information display, the system may be malfunctioning. Have the vehicle inspected by your Toyota dealer. Outside temperature display In the following situations, the correct outside temperature may not be displayed, or the display may take longer than normal to change. When stopped, or driving at low speeds (less than 12 mph [20 km/h]) When the outside temperature has changed suddenly (at the entrance/exit of a garage, tunnel, etc.) When “ --” or “ E” is displayed, the system may be malfunctioning.Take your vehicle to your Toyota dealer. Displays the outside temperature within the range of -40°F (-40°C) to 122°F (50°C). When the outside temperature is approximately 37°F (3°C) or lower, the indicator will flash for approximately 10 seconds, then stay on. Liquid crystal display Liquid crystal display Customization Settings (e. g. meter display) can be changed on screen of the multi-information display. (Settings display) Warning: The information display at low temperatures Allow the interior of the vehicle to warm up before using the liquid crystal information display. At extremely low temperatures, the information display monitor may respond slowly, and display changes may be delayed. For example, there is a lag between the driver’s shifting and the new gear number appearing on the display. This lag could cause the driver to downshift again, causing rapid and excessive engine braking and possibly an accident resulting in death or injury. Notice: To prevent damage to the engine and its components Do not let the indicator needle of the tachometer enter the red zone, which indicates the maximum engine speed. The engine may be overheating if the engine coolant temperature gauge is in the red zone (H). In this case, immediately stop the vehicle in a safe place, and check the engine after it has cooled completely. (If your vehicle overheats) Voltmeter When the voltmeter indicates 19 V or higher or 9 V or lower while the engine is running, there may be a battery or charging system malfunction. Have the vehicle inspected at your Toyota dealer. Engine oil pressure gauge When the value of the engine oil pressure gauge drops while the engine is running, stop the vehicle in a safe place immediately and check the amount of engine oil. (Checking the engine oil) When the oil pressure drops even though the engine oil amount has not decreased, or if the oil pressure does not increase when engine oil is added, contact your Toyota dealer, as there may be a problem with the lubrication system. Odometer Trip metersOdometer and trip meter display Odometer and trip meter display Display items Distance until next engine oil changeDisplay items Odometer Displays the total distance the vehicle has been driven. Trip meter A/Trip meter B Displays the distance the vehicle has been driven since the meter was last reset. Trip meters A and B can be used to record and display different distances independently. Distance until next engine oil change Displays the distance the vehicle can be driven until an oil change is necessary. Switches Display change button Display change button Odometer and trip meter display Display change button Changing the display Each time the “ ODO TRIP” switch is pressed, the displayed item will be changed. When the trip meter is displayed, pressing and holding the switch will reset the trip meter. Pop-up display In some situations the following will be temporarily displayed: Distance until next engine oil change Displays the distance until the next engine oil change. This display will be displayed in the following situations: When the engine switch is turned to ON. When a warning message indicating that oil maintenance should be performed soon or is required is displayed. Brightness control Instrument panel light control Instrument panel light control Meter Instrument panel light control Instrument panel light control The brightness of the instrument panel lights can be adjusted. Pressing the button will adjust brightness of the instrument panel light. The brightness of the instrument panel lights can be adjusted by pressing the button. Short press: 1 step change of brightness level. Long press: continues change of brightness level until released. Note: Instrument cluster brightness adjustment The instrument cluster brightness levels when the tail lights are on and off can be adjusted individually. However, when the surroundings are bright (daytime, etc.), turning on the tail lights will not change the instrument cluster brightness.