Back door The back door can be locked/unlocked and opened/closed by the following procedures. Warning: Observe the following precautions. Failure to do so may result in death or serious injury. Child safety Back door precautions Before driving the vehicle Before driving the vehicle, make sure that the back door is fully closed. If the back door is not fully closed, it may open unexpectedly while driving, causing an accident. Caution while driving Keep the back door closed while driving. If the back door is left open, it may hit near-by objects while driving or luggage may be unexpectedly thrown out, causing an accident. In addition, exhaust gases may enter the vehicle, causing death or a serious health hazard. Make sure to close the back door before driving. Never let anyone sit in the luggage compartment. In the event of sudden braking, sudden swerving or a collision, they are susceptible to death or serious injury. When children are in the vehicle Do not allow children to play in the luggage compartment. If a child is accidentally locked in the luggage compartment, they could have heat exhaustion or other injuries. Do not allow a child to open or close the back door. Doing so may cause the back door to move unexpectedly, or cause the child’s hands, arms, head, or neck to be caught by the closing back door. Operating the back door Observe the following precautions. Failure to do so may cause parts of the body to be caught, resulting in death or serious injury. Remove any heavy loads, such as snow and ice, from the back door before opening it. Failure to do so may cause the back door to suddenly shut again after it is opened. When opening or closing the back door, thoroughly check to make sure the surrounding area is safe. If anyone is in the vicinity, make sure they are safe and let them know that the back door is about to open or close. Use caution when opening or closing the back door in windy weather as it may move abruptly in strong wind. Vehicles without a power back door: The back door may suddenly shut if it is not opened fully. It is more difficult to open or close the back door on an incline than on a level surface, so beware of the back door unexpectedly opening or closing by itself. Make sure that the back door is fully open and secure before using the luggage compartment. Vehicles with a power back door: The back door may suddenly shut if it is not opened fully while on a steep incline. Make sure that the back door is secured before using the luggage compartment. When closing the back door, take extra care to prevent your fingers, etc., from being caught. When closing the back door, make sure to press it lightly on its outer surface. If the back door handle is used to fully close the back door, it may result in hands or arms being caught. Do not pull on the back door damper stay (vehicles without a power back door) (Back door damper stays) or back door spindle (vehicles with a power back door) (Back door spindles) to close the back door, and do not hang on the back door damper stay (vehicles without a power back door) or back door spindle (vehicles with a power back door). Doing so may cause hands to be caught or the back door damper stay (vehicles without a power back door) or back door spindle (vehicles with a power back door) to break, causing an accident. If a heavy object is attached to the back door, it may suddenly shut again after being opened, causing someone’s hands, arms, head or neck to be caught and injured. Do not attach any accessories other than genuine Toyota parts to the back door. Keys Keyless entry Unlocking and locking the back door from the outside Smart key system Entry functions Smart key system (if equipped) Carry the electronic key to enable this function. Unlocks all the doors The doors cannot be unlocked for 3 seconds after the doors are locked. Locks all the doors Check that the door is securely locked. Wireless remote control Wireless remote controlVehicles without a smart key systemVehicles with a smart key system Key KeyVehicles without a smart key systemVehicles with a smart key system Note: Lights Luggage compartment light Luggage compartment light The luggage compartment light turns on when the back door is opened. If the luggage compartment light is left on when the engine switch is turned off, the light will go off automatically after 20 minutes. Operation signals Operation signals Unlocking and locking the back door from the inside Door lock switches Unlocking and locking the doors from the inside Opener Back door Opening/closing the back door (vehicles without a power back door) Opening the back door Raise the back door while pushing up the back door opener switch. Closing the back door Lower the back door using a back door handle, and then push the back door from the outside to close it. Be careful not to pull the back door sideways when using a handle. Note: Open door warning buzzer Open door warning buzzer Notice: Back door damper stays The back door is equipped with damper stays that hold the back door in place. Observe the following precautions. Failure to do so may cause damage to the back door damper stay, resulting in malfunction. Do not attach any foreign objects, such as stickers, plastic sheets, or adhesives to the damper stay rod. Do not touch the damper stay rod with gloves or other fabric items. Do not attach any accessories other than genuine Toyota parts to the back door. Do not place your hand on the damper stay or apply lateral forces to it. Opener Back door Opening/closing the back door (vehicles with a power back door) Opening/closing the back door using the wireless remote control Press and hold the switch. Unlock the back door before operating. Pressing the switch while the back door is opening/closing will stop the operation. Pressing and holding the switch again will operate the back door in the opposite direction. Opening/closing the back door using the power back door switch on the instrument panel Press and hold the switch. Unlock the back door before operating. Pressing the switch while the back door is opening/closing will stop the operation. Pressing and holding the switch again will operate the back door in the opposite direction. Opening the back door using the back door opener switch When the back door is unlocked: Press the back door opener switch. When the back door is locked: While carrying the electronic key on your person, press the back door opener switch. Pressing the switch while the back door is opening/closing will stop the operation. Pressing the switch again will open the back door. Opening/closing the back door using the power back door switch on the back door Press the switch. Pressing the switch while the back door is opening/closing will stop the operation. Pressing the switch again will operate the back door in the opposite direction. Closing the back door and locking all of the doors using the lock switch on the back door Press the switch. A different buzzer than the one for a normal power back door closing operation will sound and the back door will begin closing automatically. When the back door is closed, all of the doors will lock simultaneously and operation signals will indicate that all of the doors have been locked. If the switch is pressed while the power back door is closing, the operation will stop. Closing the back door using the back door handle Lower the back door using the back door handle, then a buzzer sounds and the back door automatically closes. Note: Back door closer In the event that the back door is left slightly open, the back door closer will automatically close it to the fully closed position. The back door closer can function when the engine switch is in any mode. The back door can be opened using the back door opener switch even if the back door closer is operating. Power back door operating conditions If the following conditions are met, the power back door can be opened and closed automatically. When the power back door system is enabled. (Customizable features) When the engine switch is in ON, one of the following conditions must be met in addition to the above conditions: The parking brake is engaged. The brake pedal is depressed. The shift lever is in P. Operation of the power back door When the power back door begins to operate, the emergency flashers will flash twice and a buzzer will sound. A buzzer sounds to indicate that the back door is operating. When the power back door is disabled, the power back door will not operate but can be opened and closed manually. When the power back door is opening/closing, if the power back door becomes obstructed, operation will stop. Jam protection function Power back door Jam protection function Sensors are installed on the right and left sides of the power back door. When the door is automatically closing and the sensors are pushed due to an object being clamped, etc., the jam protection function operates. From that position the door automatically moves a little in the opposite direction and then the function stops. Back door reserve lock function This function reserves the locking of the power back door when the power back door is open. If the following operations are performed, all of the doors except the power back door will lock and then the power back door will lock when it is completely closed. Close all of the doors, except the back door. Perform an automatic closing operation of the power back door and lock the doors using the wireless remote control (Wireless remote controlVehicles without a smart key systemVehicles with a smart key system) or smart key system (Smart key system (if equipped)) while the power back door is closing. A buzzer sounds and the emergency flashers flash to indicate that all the doors have been closed and locked. If the electronic key is placed inside the vehicle after starting a close operation via the door reserve lock function, the electronic key may become locked inside the vehicle. If the back door does not fully close due to the operation of the jam protection function, etc., while the back door is automatically closing after a door reserve lock operation is performed, the door reserve lock function is canceled and all the doors will unlock. Before leaving the vehicle, make sure that all the doors are closed and locked. When reconnecting the battery To enable the power back door to operate properly, close the back door manually. Customization Some functions can be customized. (Customizable features) Warning: Back door closer In the event that the back door is left slightly open, the back door closer will automatically close it to the fully closed position. It takes several seconds before the back door closer begins to operate. Be careful not to get fingers caught or anything else in the back door, as this may cause bone fractures or other serious injuries. Use caution when using the back door closer as it still operates when the power back door system is disabled. Power back door Observe the following precautions when operating the power back door. Failure to do so may cause death or serious injury. Check the safety of the surrounding area to make sure there are no obstacles or anything that could cause any of your belongings to get caught. If anyone is in the vicinity, make sure they are safe and let them know that the back door is about to open or close. If the power back door system is disabled while the power back door is operating, the back door will stop operating. The back door must then be operated manually. Take extra care in this situation, as the back door may open or close suddenly. If the operating conditions of the power back door (Power back door operating conditions) are no longer met, a buzzer may sound and the back door may stop opening or closing. The back door must then be operated manually. Take extra care on an incline in this situation, as the back door may move suddenly. On an incline, the back door may suddenly shut after it opens. Make sure the back door is fully open and secure. In the following situations, the power back door may detect an abnormality and automatic operation may be stopped. In this case, the back door must then be operated manually. Take extra care in this situation, as the stopped back door may suddenly open or close, causing an accident. When the back door contacts an obstacle When the battery voltage suddenly drops, such as when the engine switch is turned to ON or the engine is started during automatic operation If a heavy object is attached to the back door, the back door may not operate, causing a malfunction, or the back door may suddenly shut again after being opened, causing someone’s hands, arms, head or neck to be caught and injured. Do not attach any accessories other than genuine Toyota parts to the back door. Jam protection function Observe the following precautions. Failure to do so may cause death or serious injury. Never use any part of your body to intentionally activate the jam protection function. The jam protection function may not work if something gets caught just before the back door fully closes. Be careful not to get fingers caught or anything else. The jam protection function may not work depending on the shape of the object that is caught. Be careful not to catch fingers or anything else. Notice: Back door spindles The back door is equipped with spindles that hold the back door in place. Observe the following precautions. Failure to do so may cause damage to the back door spindle, resulting in malfunction. Do not attach any foreign objects, such as stickers, plastic sheets, or adhesives to the spindle rod. Do not attach any accessories other than genuine Toyota parts to the back door. Do not place your hand on the spindle or apply lateral forces to it. To prevent back door closer malfunction Do not apply excessive force to the back door while the back door closer is operating. Applying excessive force may cause the back door closer to malfunction. To prevent malfunction of the power back door Make sure that there is no ice between the back door and frame that would prevent movement of the back door. Operating the power back door when excessive load is present on the back door may cause a malfunction. Do not apply excessive force to the power back door while the back door is operating. Take care not to damage the sensors (installed on the right and left edges of the power back door) with a knife or other sharp object. If a sensor is disconnected, the power back door will not close automatically. Enabling/disabling the power back door system (vehicles with a power back door) The power back door system can be enabled/disabled on the multi-information display. (Customizable features) Press or of meter control switches and select . Press or of meter control switches, select the “Vehicle Settings” and then press and hold . Press or of the meter control switches, select “PBD” and then press . Press or of the meter control switches, and then select “System Settings”. ON and OFF will be switched when is pressed. When OFF is selected and the operations of the power back door is made to stop from the of multi-information display, unless it is set to ON, the operation of the power back door will not return. (No return in the engine switch operation) Adjusting the open position of the back door (vehicles with a power back door) The open position of the power back door can be adjusted. Stop the power back door at the desired position. (Opening/closing the back door using the power back door switch on the instrument panel) Press and hold the power back door switch on the back door for approximately 2 seconds. When setting is complete, a buzzer will sound 4 times. The next time the power back door is opened, it will stop at that position. Note: Returning the power back door opening position to the default setting Press and hold the power back door switch on the back door for approximately 7 seconds. A buzzer will sound 4 times, pause, and then sound 2 more times. The next time the power back door is opened, it will stop at the default position. When setting the open position of the back door by the multi-information display The open position of the power back door can be adjusted using the multi-information display. (Customizable features) When opened, the power back door will open to the last position set using the power back door switch on the back door or on the multi-information display.