Multi-information display Display and menu icons Display 4.2-inch display Driving support system status display area Displays an image when the following systems are operating and a menu icon other than is selected: LTA (Lane Tracing Assist) Dynamic radar cruise control with full-speed range RSA (Road Sign Assist) (if equipped) (RSA (Road Sign Assist)*) Content display area By selecting menu icons on the multi-information display, a variety of driving-related information can be displayed. The multi-information display can also be used to change display settings and other vehicle settings. Warning or advice pop-up displays are also displayed in certain situations. 7-inch display Driving support system status display area Displays an image when the following systems are operating and a menu icon other than is selected: LTA (Lane Tracing Assist) Dynamic radar cruise control with full-speed range RSA (Road Sign Assist) (if equipped) (RSA (Road Sign Assist)*) Content display area By selecting menu icons on the multi-information display, a variety of driving-related information can be displayed. The multi-information display can also be used to change display settings and other vehicle settings. Warning or advice pop-up displays are also displayed in certain situations. Multi-information display Menu icons Menu iconsMenu icons The menu icons will be displayed by pressing the or meter control switch.

	Driving information display (Content of driving information)
	Driving support system information display (Driving support system information display)
	Audio system-linked display (Audio system-linked display)
	Vehicle information display (Vehicle information display)
	Settings display (Settings display)
	Warning message display (If a warning message is displayed)

Note: Liquid crystal display Small spots or light spots may appear on the display. This phenomenon is characteristic of liquid crystal displays, and there is no problem continuing to use the display. Warning: Caution for use while driving When operating the multi-information display while driving, pay extra attention to the safety of the area around the vehicle. Do not look continuously at the multi-information display while driving as you may fail to see pedestrians, objects on the road, etc. ahead of the vehicle. The information display at low temperatures Gauges and meters (4.2-inch display) - The information display at low temperatures, Gauges and meters (7-inch display) - The information display at low temperatures Switches Meter control switches Multi-information display Meter control switches Meter Meter control switches Steering wheel Meter control switches Changing the meter display The multi-information display is operated using the meter control switches. / : Select menu icons / : Change displayed content, scroll up/down the screen and move the cursor up/down Press: Enter/SetPress and hold: Reset/Display customizable items Return to the previous screen Call sending/receiving and history display Linked with the hands-free system, sending or receiving call is displayed. For details regarding the hands-free system, refer to the “MULTIMEDIA OWNER’S MANUAL”. Multi-information display Driving information display Driving information displayContent of driving information Display items Speedometer display/Driving range (4.2-inch display) Fuel economy Eco Driving Indicator/Driving range Speedometer display/Driving range (4.2-inch display) Speedometer display Driving range Displays driving range with remaining fuel. Use the displayed values as a reference only. This distance is computed based on your average fuel consumption. As a result, the actual distance that can be driven may differ from that displayed. When only a small amount of fuel is added to the tank, the display may not be updated.When refueling, turn the engine switch off. If the vehicle is refueled without turning the engine switch off, the display may not be updated. Multi-information display Fuel economy Fuel economy Current fuel consumption Average fuel economy Driving range Fuel consumption Current fuel consumption Fuel consumption Average fuel economy Fuel economy Use the displayed values as a reference only. Average fuel economy (after reset) To reset the average fuel economy display, press and hold the meter control switch. Current fuel consumption Displays instantaneous current fuel consumption. Driving range Displays driving range with remaining fuel. This distance is computed based on your average fuel consumption. As a result, the actual distance that can be driven may differ from that displayed. When only a small amount of fuel is added to the tank, the display may not be updated.When refueling, turn the engine switch off. If the vehicle is refueled without turning the engine switch off, the display may not be updated. The average fuel economy display can be changed in . (Meter display settings that can be changed) Average fuel economy (after start) Displays the average fuel consumption since engine start. Average fuel economy (after refuel) Displays the average fuel consumption since the vehicle was refueled. Multi-information display Eco Driving Indicator Eco Driving Indicator Eco Driving Indicator Light Driving rangeEco Driving Indicator/Driving range Eco Driving Indicator Eco Driving Indicator Light During Eco-friendly acceleration (Eco driving), the Eco Driving Indicator Light will turn on. When the acceleration exceeds the Zone of Eco driving, or when the vehicle is stopped, the light turns off. Eco Driving Indicator Zone Display Suggests the Zone of Eco driving with current Eco driving ratio based on acceleration. Eco driving ratio based on acceleration If the acceleration exceeds the Zone of Eco driving, the right side of the Eco Driving Indicator Zone Display will illuminate. At this time, the Eco Driving Indicator Light will turn off. Zone of Eco driving Driving range Displays driving range with remaining fuel. Use the displayed values as a reference only. This distance is computed based on your average fuel consumption. As a result, the actual distance that can be driven may differ from that displayed. When only a small amount of fuel is added to the tank, the display may not be updated.When refueling, turn the engine switch off. If the vehicle is refueled without turning the engine switch off, the display may not be updated. Note: Eco Driving Indicator Eco Driving Indicator will not operate under the following conditions: The shift lever is in any position other than D. The vehicle speed is approximately 80 mph (130 km/h) or higher. Multi-information display Driving support system information display Driving support system information displayDriving support system information display Driving support system information Select to display the operational status of the following systems: LTA (Lane Tracing Assist) (LTA (Lane Tracing Assist)) Dynamic radar cruise control with full-speed range (Dynamic radar cruise control with full-speed range) RSA (Road Sign Assist) (if equipped) (RSA (Road Sign Assist)*) Multi-information display Audio system-linked display Audio system-linked displayAudio system-linked display Select to enable selection of an audio source or track on the meter using the meter control switches. This menu icon can be set to be displayed/not displayed in . Multi-information display Vehicle information display Drive information Vehicle information display Average vehicle speed Elapsed time Drive distanceVehicle information display Drive information Displays drive information such as the following: Drive information type Drive information items Displays the following depending on which drive information type and drive information items were selected in . (Meter display settings that can be changed) After start Distance: Displays the distance driven since engine start Elapsed time: Displays the elapsed time since engine start Average vehicle speed: Displays the average vehicle speed since engine start After reset Distance: Displays the distance driven since the display was reset^* Elapsed time: Displays the elapsed time since the display was reset^* Average vehicle speed: Displays the average vehicle speed since the display was reset^{* *}To reset, display the desired item and press and hold the meter control switch. Multi-information display Tire pressure Tire pressure Tire pressure warning system Multi-information display AWD Control AWD ControlAWD Control (if equipped) Torque distribution display Displays the drive status of each wheel in 6 steps from 0 to 5. Multi-information display Settings Meter Settings Language (multi-information display)Settings display Meter display settings that can be changed Language Select to change the language displayed. Units Select to change the units of measure displayed. Speedometer display (7-inch display) Select to set the display of the speedometer to analog/digital. Eco Driving Indicator Light Select to enable/disable the Eco Driving Indicator Light. Fuel economy display Select to change the average fuel consumption display between after start/after reset. (Fuel economy) Select to display/not display the audio system linked display. Select to change the displayed content of the following: Drive information type Select to change the drive information type display between after start/after reset. Drive information items Select to set the first and second items of the drive information display to any of the following: average vehicle speed/distance/elapsed time. Pop-up display Select to enable/disable pop-up displays for each relevant system. Multi-information display off Select to turn the multi-information display off. To turn the multi-information display on again, press any of the following meter control switches / / / / / . Default setting Select to reset the meter display settings to the default setting. Vehicle functions and settings that can be changed Customizable features Note: Suspension of the settings display Some settings cannot be changed while driving. When changing settings, park the vehicle in a safe place. If a warning message is displayed, operation of the settings display will be suspended. Warning: Cautions during setting up the display If the engine is running when changing the display settings, ensure that the vehicle is parked in a place with adequate ventilation. In a closed area such as a garage, exhaust gases including harmful carbon monoxide (CO) may collect and enter the vehicle. This may lead to death or a serious health hazard. Notice: During setting up the display To prevent battery discharge, ensure that the engine is running while setting up the display features. Multi-information display Stop & Start system information Stop & Start system information display Stop & Start system System information display Stop & Start system information Stop & Start system operation time (after start)/status notification Displays the current amount of time the engine has been stopped by the operation of the Stop & Start system.Also shows the status of the Stop & Start system with a pop-up display. (Multi-information display messages) Stop & Start system settings The length of time of the Stop & Start system will operate when the “A/C” switch of the air conditioning system is on can be set to 2 different levels in of the multi-information display. (Changing the idling stop time with the air conditioning system on) Multi-information display Suggestion function Suggestion functionSuggestion function Displays suggestions to the driver in the following situations. To select a response to a displayed suggestion, use the meter control switches. Suggestion to enable the power back door (if equipped) If the power back door system is disabled (setting on set to off) and the power back door switch on the instrument panel is operated, a suggestion message will be displayed asking if you wish to enable the power back door system. To enable the power back door system, select “Yes”. After enabling the power back door system, press the power back door switch again to open or close the power back door. Suggestion to turn off the headlights (if equipped) If the headlights are left on for a certain amount of time after the engine switch has been turned off, if the headlight switch is in the “AUTO” position, a suggestion message will be displayed asking if you wish to turn the headlights off. To turn the headlights off, select “Yes”. If the driver's door is opened after the engine switch is turned off, this suggestion message will not be displayed. Note: Customization Some functions can be customized. (Customizable features)