Other interior features Sun visorsSun visors To set the visor in the forward position, flip it down. To set the visor in the side position, flip down, unhook, and swing it to the side. Lights Vanity lights Mirrors Vanity mirrors Vanity lights Vanity lights Vanity mirrorsVanity mirrors Slide the cover to open. The light turns on when the cover is opened. Note: Automatic light off to prevent 12-volt battery discharge If the vanity lights remain on when the power switch is turned to OFF, the lights will go off automatically after 20 minutes. Notice: To prevent 12-volt battery discharge Do not leave the vanity lights on for extended periods while the hybrid system is off. Power outletsPower outlet (12 VDC) Please use a power supply for electronic goods that use less than 12 VDC /10 A (power consumption of 120 W). When using electronic goods, make sure that the power consumption of all the connected power outlets is less than 120 W. Open the lid. Note: The power outlet can be used when The power switch is in ACC or ON. When stopping the hybrid system Disconnect electrical devices with charging functions, such as mobile battery packs.If such devices are left connected, the hybrid system may not stop normally. Notice: When power outlet is not in use To avoid damaging the power outlet, close the power outlet lid when the power outlet is not in use. Foreign objects or liquids that enter the power outlet may cause a short circuit. To prevent blown fuse Do not use an accessory that uses more than 12 V 10 A. To prevent 12-volt battery discharge Do not use the power outlet longer than necessary when the hybrid system is off. Power outletsPower outlets (120 VAC) (if equipped) Please use as a power supply for electronic devices that use less than 120 VAC (power consumption of 1500 W). Using the power outlets Rear of console box Open the lid. Luggage compartment Open the lid. When turning the power outlets on Check that the parking brake is engaged, and press the power switch while depressing the brake pedal. Check that the READY indicator is illuminated, and press the AC120V switch. The power outlets can be used when the indicator on the AC120V switch is illuminated. The power outlets are turned off/on each time the AC120V switch is pressed. When connecting a device Open the lid, and fully and securely insert the plug of the device into the power outlet. Rear of console box Luggage compartment When turning the power outlets off Turn the connected devices off. Press the AC120V switch to turn the power outlets off. Disconnect each plug from the power outlet. Close the lid of each power outlet. Note: The power outlet can be used when The READY indicator is illuminated. Rules/regulations regarding idling stop The engine will start automatically to charge the hybrid battery (traction battery) if its charge becomes low. In some municipalities, if the engine starts while the vehicle is parked or stopped, it may violate local rules or regulations regarding idling stop and you may be penalized. Make sure to check the local rules and regulations before using the power outlets while the vehicle is parked or stopped. Power outlets When connecting a device, make sure that the total power consumption of all devices connected to the 120 VAC power outlets is less than 1500 W. If a device is connected and the power consumption is exceeded, a protection circuit will cut the power supply and the power outlets will not be able to be used. Depending on the device to be used, the current flow may be high and the initial peak wattage may exceed 1500 W.In this case, the protection circuit may operate, and the power outlets may not be able to be used. Depending on the connected device, it may cause interference with TV and radio broadcasts. The voltage of the power outlets cannot be measured with a commercially available electrical tester. If it is necessary to check the voltage, have the vehicle inspected by your Toyota dealer. While a power outlet is being used, a cooling fan sound may be heard from near a rear seat. This does not indicate a malfunction. Devices which may not operate correctly The following 120 VAC devices may not operate properly even if their power consumption is less than 1500 W: Devices with high initial peak wattage Measuring devices that process precise data Devices that require an extremely stable power supply Devices that require a constant power supply from the power outlet, such as a device with a timer. When the 120 VAC power outlets cannot be used If the AC120V switch is pressed but the switch indicator does not illuminate, the protection circuit may have operated. In this case, perform the appropriate procedures as follows. Disconnect the plug of each device from the power outlets, check that the total power consumption of all devices to be connected to the power outlets is less than 1500 W and check that the devices are not malfunctioning, reconnect the devices and then press the AC120V switch again. Check the charge of the hybrid battery (traction battery) (Energy monitor). If the charge is low, shift the shift lever to P, allow the engine to run to charge the hybrid battery (traction battery), and then press the AC120V switch again. If the temperature inside the vehicle is high, such as after the vehicle has been parked in the sun, use the air conditioning system to sufficiently ventilate or cool the interior, and then press the AC120V switch again. If the vehicle has been stopped in a cold area, to protect the hybrid battery (traction battery), the power outlets may not be able to be used. In this case, drive the vehicle for a while to warm up the hybrid battery (traction battery), and then press the AC120V switch again. If the power outlets cannot be used even after performing the appropriate procedures above, have the vehicle inspected by your Toyota dealer. Warning: For safe use Observe the following precautions.Failure to do so may lead to an accident, resulting in death or serious injury. Do not use devices such as the following when driving: Devices which cannot be properly secured within the vehicle. Devices which may distract the driver and be a hinderance to safe driving, such as a TV, DVD player, etc. Unsecured devices which generate heat, such as a toaster, microwave, electric heater, electric kettle, coffee maker, etc., as they may cause burns or a fire in the case of sudden braking or an accident. Devices which may fall under the pedals and prevent the brake pedal from being depressed. Do not use devices which produce steam while the windows are closed. Doing so may cause the windows to fog up, reducing visibility and making it difficult to drive safely. Also, the steam may damage or negatively affect other devices. Do not connect a malfunctioning device to a power outlet, as doing so may cause the power outlets to become inoperable. Do not disconnect the plug of a device while your hands are wet or insert a pin or other object into the power outlet. Also, if a liquid or snow is on the power outlet, dry the outlet before using it. Do not attempt to modify, disassemble or repair a power outlet. Also, do not replace the 120 VAC inverter with a commercially available one. For information on repairs, contact your Toyota dealer. Be careful not to get any part of your body caught in the power outlet lid. Do not let children touch the power outlets. Keep the power outlets free of dust and foreign matter. If the plug of a device fits loosely in a power outlet, even though it is fully inserted, replace the power outlet. For information on replacement, contact your Toyota dealer. Using the power outlets while parked or stopped Observe the following precautions.Failure to do so may lead to an accident, possibly resulting in death or serious injury. Make sure to engage the parking brake and shift the shift lever to P. Do not leave the vehicle unattended while the READY indicator is illuminated and a device is connected to a power outlet. Make sure that the hood is closed. As the engine will start automatically depending on the condition of the vehicle, make sure that nothing is left near or contacting the exhaust pipes. Also, do not put your head or hands anywhere inside the engine compartment, as the cooling fan may operate suddenly. Keep hands and clothing (especially a tie, scarf, etc.) away from the fan as they may get caught in a fan. Do not use the power outlets in an area with poor ventilation or an enclosed area, such as a garage without a ventilation or exhaust system, or in an area where the vehicle may become surrounded by snow, as the exhaust gasses may accumulate, causing a lack of oxygen. Do not use the power outlets if the vehicle has a vehicle cover installed. Do not sleep in the vehicle while using devices such as an electric heater. Devices to be connected Make sure to read any instruction manual which came with a device and observe any warnings on the device. Do not connect a device to a power outlet if the device is malfunctioning or its plug is damaged. Do not use power outlets for medical devices, as the output of the power outlet may be cut, depending on the condition of the vehicle. Notice: Observe the following precautions.Failure to do so may lead to the power outlets not operating correctly or damage to the vehicle or a connected device. To avoid short circuit or malfunction Do not set a device which generates heat near the interior components or on a seat. Heat may cause these parts to melt or burn. Do not use devices which are sensitive to vibration or heat in the vehicle.These devices may malfunction due to vibration while driving or heat while the vehicle is parked in the sun. When not using a power outlet, make sure to close the cover. If foreign matter or a liquid enters the power outlet, it may cause a malfunction or short circuit. Do not use a multi-point outlet adapter as doing so may overload the power outlet. When the ambient temperature is high If the temperature inside the vehicle is high, such as after the vehicle has been parked in the sun, the power outlets may not be able to be used. Sufficiently ventilate the interior or use the air conditioning system to cool the interior before attempting to use the power outlets. When the ambient temperature is low If the vehicle has been stopped in a cold area, to protect the hybrid battery (traction battery), the power outlets may not be able to be used. In this case, drive the vehicle for a while to warm up the hybrid battery (traction battery). To prevent 12-volt battery discharge Do not use the power outlets longer than necessary when the hybrid system is not running. USB charging portsUSB charging ports The USB charging ports are used to supply 2.5A (USB Type-A) or 3.0A (USB Type-C) of electricity at 5 V to external devices. Use the appropriate terminal for each charging port type.The USB charging ports are for charging only. They are not designed for data transfer or other purposes.Depending on the external device, it may not charge properly. Refer to the manual included with the device before using a USB charging port. Using the USB charging ports In the console box Open the console box lid. USB Type-A USB Type-C Rear of console box Open the lid. USB Type-A USB Type-C Luggage compartment USB Type-A USB Type-C Note: The USB charging ports can be used when The power switch is in ACC or ON. Situations in which the USB charging ports may not operate correctly USB Type-A: If a device which consumes more than 2.5 A at 5 V is connectedUSB Type-C: If a device which consumes more than 3.0 A at 5 V is connected If a device designed to communicate with a personal computer, such as a USB memory device, is connected If the connected external device is turned off (depending on device) If the temperature inside the vehicle is high, such as after the vehicle has been parked in the sun About connected external devices Depending on the connected external device, charging may occasionally be suspended and then start again. This is not a malfunction. When using the USB charging ports in the console box The USB charging ports can be used while the console box lid is closed. Notice: To prevent damage to the USB charging ports Do not insert foreign objects into the ports. Do not spill water or other liquids into the ports. Rear of console box: When the USB charging ports are not in use, close the lids. If a foreign object or liquid enters a port may cause a short circuit. Do not apply excessive force to or impact the USB charging ports. Do not disassemble or modify the USB charging ports. To prevent damage to external devices Do not leave external devices in the vehicle. The temperature inside the vehicle may become high, resulting in damage to an external device. Do not push down on or apply unnecessary force to an external device or the cable of an external device while it is connected. To prevent 12-volt battery discharge Do not use the USB charging ports for a long period of time when the hybrid system is off. Wireless chargerWireless charger (if equipped) A portable device can be charged by just placing Qi standard wireless charge compatible portable devices according to the Wireless Power Consortium, such as smartphones and mobile batteries, etc., on the charge area. This function cannot be used with portable devices that are larger than the charging area. Also, depending on the portable device, it may not operate as normal. Please read the operation manual for portable devices to be used. The “ Qi” symbol The “ Qi” symbol is a trademark of the Wireless Power Consortium. Name for all parts Charge area Operation indicator light Power supply switch Using the wireless charger Press the power supply switch of the wireless charger. Switches on and off with each press of the power supply switch. When turned on, the operation indicator light (green) comes on. Even with the hybrid system off, the on/off state of the power supply switch is memorized. Place the charging side of the portable device down. When charging, the operation indicator light (orange) comes on. If charging is not occurring, try placing the portable device as close to the center of the charging area as possible. When charging is complete, the operation indicator light (green) comes on. Recharging function When charging is complete and after a fixed time in the charge suspension state, charging restarts. When the portable device is moved, charging is stopped for a moment and then it restarts. Lighting conditions of operation indicator light

Operation indicator light	Conditions
Turning off	When the Wireless charger power supply is off
Green (comes on)	On Standby (charging possible state)
	When charging is complete*
Orange (comes on)	When placing the portable device on the charging area (detecting the portable device)
	Charging

^*Depending on the portable device, there are cases where the operation indicator light will continue being lit up orange even after the charging is complete. When the operation indicator light flashes When an error occurs, the operation indicator light flashes an orange color.Handle the error based on the following tables. Flashing repeatedly once every second (Orange)

Suspected causes	Handling method
Vehicle to charger communication failure.	If the power switch is in ACC: Turn the power switch to ON. If the power switch is in ON: Turn the power switch off and then back to ON. If the operation indicator light still blinks after performing the above procedure, contact your Toyota dealer.

Repeatedly flashes 3 times continuously (Orange)

Suspected causes	Handling method
A foreign substance is between the portable device and charge area.	Remove the foreign substance from between portable device and the charge area.
The portable device is out of sync due to the device being shifted from the center of the charge area.	Place the portable device near the center of the charge area.

Repeatedly flashes 4 times continuously (Orange)

Suspected causes	Handling method
Temperature rising within the wireless charger.	Stop charging at once and start charging again after for a while.

Note: The wireless charger can be operated when The power switch is in ACC or ON. Usable portable devices Qi standard wireless charge standard can be used on compatible devices.However, not all Qi standard devices and compatibility are guaranteed. Starting with mobile phones and smartphones, it is aimed for low power electrically supplied portable devices of no more than 5W. When covers and accessories are attached to portable devices Do not charge in situations where cover and accessories not able to handle Qi are attached to the portable device. Depending on the type of cover and accessory, it may not be possible to charge. When charging is not performed even with the portable device placed on the charge area, remove the cover and accessories. While charging, noise enters the AM radio Turn off the wireless charger and confirm that the noise has decreased. If the noise decreases, continuously pushing the power supply switch of the wireless charger for 2 seconds, the frequency of the charger can be changed and the noise can be reduced.Also, on that occasion, the operation indicator light will flash orange 2 times. Important points of the wireless charger If the electronic key cannot be detected within the vehicle interior, charging cannot be done. When the door is opened and closed, charging may be temporarily suspended. When charging, the wireless charging device and portable device will get warmer, however this is not a malfunction.When a portable device gets warm while charging, charging may stop due to the protection function on the portable device side. In this case, when the temperature of the portable device drops significantly, charge again. Operation sounds When the power supply is turned on, while searching for the portable device a sound will be produced, however this is not a malfunction. Cleaning the wireless charger Cleaning and protecting the vehicle interior Label indicating precautions for using the wireless charger There is a label on the wireless charger. Follow the instructions on the label. Warning: Caution while driving When charging a portable device, for safety reasons, the driver should not operate the main part of the portable device while driving. Caution regarding interference with electronic devices People with implantable cardiac pacemakers, cardiac resynchronization therapy-pacemakers or implantable cardioverter defibrillators, as well as any other electrical medical device, should consult their physician about the usage of the wireless charger. The operations of the wireless charger may have an affect on medical devices. To prevent damage or burns Observe the following precautions.Failure to do so may result in a possibility of equipment failure and damage, catch fire, burns due to overheat. Do not insert any metallic objects between the charging area and the portable device while charging Do not attach stickers, metallic objects, etc., to the charger area or portable device Do not cover with cloth, etc., and charge Do not charge portable devices other than designated Do not attempt to dismantle for disassembly or modifications Do not hit or apply a strong force Notice: Conditions in which the function may not operate correctly In the following conditions, it may not operate correctly The portable device is fully charged There is foreign matter between the charge area and portable device The temperature of the portable device gets higher from charging The charging surface of the portable device is facing up The placement of the portable device is out of alignment with the charge area Near a TV tower, electric power plant, gas station, radio station, large display, airport or other facility that generates strong radio waves or electrical noise When the electronic key is in contact with, or is covered by the following metallic objects Cards to which aluminum foil is attached Cigarette boxes that have aluminum foil inside Metallic wallets or bags Coins Hand warmers made of metal Media such as CDs and DVDs When other wireless keys (that emit radio waves) are being used nearby In addition, excluding the above-mentioned, when the charger does not perform normally or the operation display lamp is flashing continuously, it is considered that the wireless charger is malfunctioning. Contact authorized Toyota dealer. To prevent failure or damage to data Do not bring magnetic cards, such as credit cards, or magnetic recording media, etc., close to the charger while charging, otherwise, data may disappear under the influence of magnetism. Also, do not bring precision instruments such as wrist watches, etc., close to the charger, as such objects may break. Do not leave portable devices in the cabin. The temperature inside the cabin may become high, when under the sun, and cause damage to the device. To prevent 12-volt battery discharge When the hybrid system is stopped, do not use the wireless charger for a long time. SunshadeSunshades Pull up the tab of the sunshade and hook the shade on using the anchors. To retract the sunshade, unhook the sunshade and retract it slowly. Rear side windows Rear quarter windows (if equipped) Notice: To ensure normal operation of the sunshades Observe the following precautions: Do not place anything where it may hinder the opening/closing of the sunshades. Do not attach items to the sunshades. Do not apply excessive load to the sunshades while they are hanging from the hooks. Do not operate the sunshade for the rear side windows while the sliding door is opening/closing. Do not store the sunshade in a tilted position. If stored in a tilted position, the sunshade screen may become creased. To prevent damage to the sunshade Observe the following precautions: Do not use the sunshade when either hook is detached. When the sliding door is opened/closed, the sunshade may be damaged. Do not pull on the screen while the hooks are attached. The screen may be damaged. ArmrestArmrest Fold down the armrest for use. Notice: To prevent damage to the armrest Do not apply too much load on the armrest. Assist gripsAssist grips Type A An assist grip installed on the ceiling can be used to support your body while sitting on the seat. Type B An assist grip installed on the pillar can be used when getting in or out of the vehicle and others. Warning: Assist grips Type A: Do not use the assist grip when getting in or out of the vehicle or rising from your seat. Notice: To prevent damage to the assist grip Do not hang any heavy object or put a heavy load on the assist grip. Grocery bag hooks Hooks Grocery bag hooks Shopping bag hooksGrocery bag hooks Type A (rear of console box) Type B (third seatback) Type C (luggage compartment) Notice: To prevent damage to the grocery bag hooks Type A and B: Do not hang any object heavier than 6.6 lb. (3 kg) on the grocery bag hook. Coat hooks Hooks Coat hooks Coat hooks The coat hooks are provided with the rear assist grips. Warning: Items that must not be hanged on the hook Do not hang coat hangers or other hard or sharp objects on the hook. If the SRS curtain shield airbags deploy, these items may become projectiles, causing death or serious injury. Notice: Coat hooks Do not hang heavy objects on the hooks. When using the coat hook in the assist grip of the second seats, be careful not to get the hooked object caught in the sliding doors being opened or closed.