Driving position memory^{* *}If equipped This feature automatically adjusts the positions of the driver’s seat, steering wheel, outside rear view mirrors and head-up display (if equipped) to make entering and exiting the vehicle easier or to suit your preferences. Two different driving positions can be recorded into memory. Each electronic key can be registered to recall your preferred driving position. Front seats Power easy access system Driving position memory Power easy access system Enabling easier driver entry and exit (power easy access system) When all of the following have been performed, the driver’s seat and steering wheel are automatically adjusted to a position that allows driver to enter and exit the vehicle easily. The shift lever has been shifted to P. The power switch has been turned off. The driver’ seat belt has been unfastened. When any of the following has been performed, the driver’ seat and steering wheel automatically return to their original positions. The power switch has been turned to ACC or ON. The driver’ seat belt has been fastened. Recording/recalling a driving position Recording procedure Check that the shift lever is in P. Turn the power switch to ON. Adjust the driver’s seat, steering wheel, outside rear view mirrors and head-up display (if equipped) to the desired positions. While pressing the “ SET” button, press button “1” or “2” until the buzzer sounds. If the selected button has already been preset, the previously recorded position will be overwritten. Recall procedure Check that the shift lever is in P. Turn the power switch to ON. Press one of the buttons for the driving position you want to recall until the buzzer sounds. Note: To stop the position recall operation part-way through Perform any of the following: Press the “ SET” button. Press button “1” or “2”. Operate any of the seat adjustment switches (only cancels seat position recall). Operate the tilt and telescopic steering control switch (only cancels steering wheel position recall). Seat positions that can be memorized (Adjustment procedure) The adjusted positions other than the position adjusted by lumbar support switch can be recorded. Operating the driving position memory after turning the power switch to OFF Recorded seat positions can be activated up to 180 seconds after the driver’s door is opened and another 60 seconds after it is closed again. In order to correctly use the driving position memory function If a seat position is already in the furthest possible position and the seat is operated in the same direction, the recorded position may be slightly different when it is recalled. When recalling the driving position Take care when recalling the driving position so that the head restraint does not touch the ceiling. If the 12-volt battery is disconnected The memorized positions are erased. Warning: Seat adjustment caution Take care during seat adjustment so that the seat does not strike the rear passenger or squeeze your body against the steering wheel. Driving position memory Memory recall function Front seats Memory recall function Registering/recall/canceling a driving position to an electronic key (memory recall function) Registering procedure Record your driving position to button “1” or “2” before performing the following: Carry only the key you want to register, and then close the driver’s door. If 2 or more keys are in the vehicle, the driving position cannot be recorded properly. Check that the shift lever is in P. Turn the power switch to ON. Recall the driving position that you want to record. While pressing the recalled button, press and hold the door lock switch (either lock or unlock) until the buzzer sounds. If the button could not be registered, the buzzer sounds continuously for approximately 3 seconds. Recall procedure Make sure that the doors are locked before recalling the driving position.Carry the electronic key that has been registered to the driving position, and then unlock and open the driver’s door using the smart key system or wireless remote control. The driving position will move to the recorded position (not including the steering wheel and head-up display [if equipped]). However, the seat will move to a position slightly behind the recorded position in order to make entering the vehicle easier.If the driving position is in a position that has already been recorded, the seat will not move. Turn the power switch to ACC or ON, or fasten a seat belt. The seat, steering wheel and head-up display (if equipped) will move to the recorded position. Cancelation procedure Carry only the key you want to cancel and then close the driver’s door.If 2 or more keys are in the vehicle, the driving position cannot be canceled properly. Check that the shift lever is in P. Turn the power switch to ON. While pressing the “ SET” button, press and hold the door lock switch (either lock or unlock) until the buzzer sounds twice. If the button could not be canceled, the buzzer sounds continuously for approximately 3 seconds. Note: Recalling the driving position using the memory recall function Different driving positions can be registered for each electronic key. Therefore, the driving position that is recalled may be different depending on the key being carried. If a door other than the driver’s door is unlocked with smart key system, the driving position cannot be recalled. In this case, press the driving position button which has been set. Customization Settings (e.g. the unlock door settings of the memory recall function) can be customized. (Customizable features: Driving position memory*)