Head-up display^{* *}If equipped The head-up display projects a variety of driving-related information and the operating state of the driving support systems on the windshield. Navigation system-linked display Head-up display Driving information display area Head-up display Navigation system-linked display System components Illustrations used in this text are intended as examples, and may differ from the image that is actually displayed by the head-up display. Driving support system display area (Driving support system display area)Navigation system-linked display area (if equipped) Displays the following items which are linked to the navigation system: Route guidance to destination Street name Compass (heading-up display) Driving information display area Displays the following items: Speed limit of the current road (linked to the navigation system) (U.S.A. only) RSA (Road Sign Assist) display (if equipped) (RSA (Road Sign Assist)*) Speedometer Shift position/shift range (Hybrid transmission) Hybrid System Indicator/tachometer/outside temperature display area (Hybrid System Indicator/tachometer/outside temperature display area) Note: Head-up display will operate when The power switch is in ON. When using the head-up display The head-up display may seem dark or hard to see when viewed through sunglasses, especially polarized sunglasses. Adjust the brightness of the head-up display or remove your sunglasses. Street name display (vehicles with navigation system) Only street names which are included in the map data will be displayed. Outside temperature display In the following situations, the correct outside temperature may not be displayed, or the display may take longer than normal to change. When stopped, or driving at low speeds (less than 12 mph [20 km/h]) When the outside temperature has changed suddenly (at the entrance/exit of a garage, tunnel, etc.) When “ -” or “ E” is displayed, the system may be malfunctioning. Take your vehicle to your Toyota dealer. Displays the outside temperature within the range of -40°F (-40°C) to 122°F (50°C). When the outside temperature is approximately 37°F (3°C) or lower, the low outside temperature indicator will flash for approximately 10 seconds, then stay on. Warning: When using the head-up display Check that the position and brightness of the head-up display image does not interfere with safe driving. Incorrect adjustment of the image’s position or brightness may obstruct the driver’s view and lead to an accident, resulting in death or serious injury. Do not continuously look at the head-up display while driving as you may fail to see pedestrians, objects on the road, etc. ahead of the vehicle. Notice: Head-up display projector Do not place any drinks near the head-up display projector. If the projector gets wet, electrical malfunctions may result. Do not place anything on or put stickers onto the head-up display projector. Doing so could interrupt head-up display indications. Do not touch the inside of the head-up display projector or thrust sharp edges or the like into the projector. Doing so could cause mechanical malfunctions. Using the head-up display Head-up display Head-up display switch Head-up display switch Switches Head-up display switch Enabling/disabling the head-up display Select on the multi-information display, select “ Vehicle Settings” (4.2-inch) / (7-inch) and then select “ HUD Main”. “ ON” and “ OFF” switches each time when “ OK” is pressed. Head-up display Settings Changing settings of the head-up display The following settings can be changed on “ HUD Main” of the multi-information display. (Settings display) Press and hold “ OK” to display the following settings: “ HUD Brightness/Position” Select to adjust the brightness or vertical position of the head-up display. “ HUD Driving Support” Tachometer Settings Blank/Hybrid System/Tachometer Select to change the display to blank (no display)/Hybrid System Indicator/tachometer. Select to enable/disable the following items: Navigation (if equipped) Driving Assist Compass (if equipped) Audio “ HUD Rotation” Select to adjust the angle of the head-up display. Press the or switch to adjust the angle of the head-up display. Note: Enabling/disabling of the head-up display If the head-up display is disabled, it will remain disabled when the power switch is turned off then back to ON. Display brightness The brightness of the head-up display can be adjusted on of the multi-information display. Also, it is automatically adjusted according to the ambient brightness. Head-up display automatic position adjustment (vehicles with driving position memory) If the display position is recorded into memory, the head-up display will be automatically adjusted to the desired position. (Driving position memory*) When the 12-volt battery is disconnected The customize settings of the head-up display will be reset. Warning: Caution for changing settings of the head-up display As the hybrid system needs to be operating while changing the settings of the head-up display, ensure that the vehicle is parked in a place with adequate ventilation. In a closed area such as a garage, exhaust gases including harmful carbon monoxide (CO) may collect and enter the vehicle. This may lead to death or a serious health hazard. Notice: When changing the settings of the head-up display To prevent 12-volt battery discharge, ensure that the hybrid system is operating while changing the settings of the head-up display. Head-up display Driving support system display area Driving support system display area Displays the operational status of the following systems: LTA (Lane Tracing Assist) (LTA (Lane Tracing Assist)) Dynamic radar cruise control with full-speed range (Dynamic radar cruise control with full-speed range) Details of content displayed on the head-up display may differ from that displayed on the multi-information display. For details, refer to the explanation of each system. Head-up display Pop-up display Pop-up display Pop-up displays for the following systems will be displayed when necessary. Driving support systems Displays a warning/suggestion/advice message or the operating state of a relevant system. PCS (Pre-Collision System) (PCS (Pre-Collision System)) Parking Support Brake function (for static objects) (if equipped) (Parking Support Brake function (static objects)*) Brake Override System (Restraining the hybrid system output (Brake Override System)) Drive-Start Control (Restraining sudden start (Drive-Start Control)) Details of content displayed on the head-up display may differ from that displayed on the multi-information display. For details, refer to the explanation of each system. / icons These icons are linked to the multi-information display : Master warning icon Displayed when a warning message is displayed on the multi-information display. (If a warning message is displayed) : Information icon Displayed when a suggestion pop-up display (Multi-information display) or advice pop-up display is displayed on the multi-information display. Warning message Some warning messages are displayed when necessary, according to certain conditions. Details of content displayed on the head-up display may differ from that displayed on the multi-information display. Audio system operation status Displayed when an audio remote control switch on the steering wheel is operated. Hands-free system status Displayed when the hands-free system is operated. Note: When a pop-up display is displayed When a pop-up display is displayed, a current display may no longer be displayed. In this case, the display will return after the pop-up display disappears. Hybrid System Indicator/tachometer/outside temperature display area Head-up display Hybrid System Indicator Hybrid System IndicatorHybrid System Indicator Charge area Hybrid Eco area Eco area Power area Displayed content is the same as that displayed on the meter (Hybrid System Indicator). For details, refer to Gauges and meters (with 4.2-inch display) - Hybrid System Indicatoror Gauges and meters (with 7-inch display) - Hybrid System Indicator. Tachometer Displays the engine speed in revolutions per minute. Outside temperature Displayed in the following situations: When the power switch is turned to ON (Displayed for approximately 10 seconds) When the low outside temperature indicator is flashing Displayed content is the same as that displayed on the multi-information display.