Maintenance data (fuel, oil level, etc.) Weight Total load capacity DimensionsDimensions and weight

Overall length		182.3 in. (4630 mm)*2 182.5 in. (4635 mm)*3
Overall width		70.1 in. (1780 mm)
Overall height*1		56.5 in. (1435 mm)
Wheelbase		106.3 in. (2700 mm)
Tread	Front	60.3 in. (1531 mm)
	Rear	60.8 in. (1544 mm)
Vehicle capacity weight(Occupants + luggage)		825 lb. (375 kg)*2 860 lb. (390 kg)*3

^*1Unladen vehicles ^*21.8 L 4-cylinder (2ZR-FAE) engine ^*32.0 L 4-cylinder (M20A-FKS) engine Vehicle identification Vehicle identification number Identification Vehicle Vehicle identification number The vehicle identification number (VIN) is the legal identifier for your vehicle. This is the primary identification number for your Toyota. It is used in registering the ownership of your vehicle. On some models: This number is stamped under the right-hand front seat. This number is also stamped on the top left of the instrument panel. This number is also on the Certification Label. Identification Engine Engine Identification number Engine number The engine number is stamped on the engine block as shown. 1.8 L 4-cylinder (2ZR-FAE) engine 2.0 L 4-cylinder (M20A-FKS) engine EngineEngine

Model	1.8 L 4-cylinder (2ZR-FAE)	2.0 L 4-cylinder (M20A-FKS)
Type	4-cylinder in line, 4-cycle, gasoline	4-cylinder in line, 4-cycle, gasoline
Bore and stroke	3.17 3.48 in. (80.5 88.3 mm)	3.17 3.84 in. (80.5 97.6 mm)
Displacement	109.7 cu. in. (1798 cm3)	121.3 cu. in. (1987 cm3)
Valve clearance	Automatic adjustment
Drive belt tension	Automatic adjustment

Refueling Fuel types Refueling Capacity Fuel Type Fuel Capacity Fuel

Fuel type		Unleaded gasoline only
Octane Rating		87 (Research Octane Number 91) or higher
Fuel tank capacity(Reference)		13.2 gal. (50.0 L, 11.0 Imp. gal.)

Oil Engine oil Engine oil Capacity Lubrication system (1.8 L 4-cylinder [2ZR-FAE] engine) Oil capacity (Drain and refill [Reference^*])

With filter	4.4 qt. (4.2 L, 3.7 Imp. qt.)
Without filter	4.1 qt. (3.9 L, 3.4 Imp. qt.)

^*The engine oil capacity is a reference quantity to be used when changing the engine oil. Warm up and turn off the engine, wait more than 5 minutes, and check the oil level on the dipstick. Engine oil selection “ Toyota Genuine Motor Oil” is used in your Toyota vehicle. Use Toyota approved “ Toyota Genuine Motor Oil” or equivalent to satisfy the following grade and viscosity. Oil grade: ILSAC GF-5 multigrade engine oil Recommended viscosity: SAE 0W-20 SAE 0W-20 is the best choice for good fuel economy and good starting in cold weather. If SAE 0W-20 is not available, SAE 5W-20 oil may be used. However, it must be replaced with SAE 0W-20 at the next oil change. Recommended viscosity (SAE): Outside temperature Oil viscosity (0W-20 is explained here as an example): The 0W in 0W-20 indicates the characteristic of the oil which allows cold startability. Oils with a lower value before the W allow for easier starting of the engine in cold weather. The 20 in 0W-20 indicates the viscosity characteristic of the oil when the oil is at high temperature. An oil with a higher viscosity (one with a higher value) may be better suited if the vehicle is operated at high speeds, or under extreme load conditions. How to read oil container label: The International Lubricant Specification Advisory Committee (ILSAC) Certification Mark is added to some oil containers to help you select the oil you should use. Oil Engine oil Engine oil Capacity Lubrication system (2.0 L 4-cylinder [M20A-FKS] engine) Oil capacity (Drain and refill [Reference^*])

With filter	4.9 qt. (4.6 L, 4.0 Imp. qt.)
Without filter	4.5 qt. (4.3 L, 3.8 Imp. qt.)

^*The engine oil capacity is a reference quantity to be used when changing the engine oil. Warm up and turn off the engine, wait more than 5 minutes, and check the oil level on the dipstick. Engine oil selection “ Toyota Genuine Motor Oil” is used in your Toyota vehicle. Use Toyota approved “ Toyota Genuine Motor Oil” or equivalent to satisfy the following grade and viscosity. Oil grade: API SN/RC multigrade engine oil Recommended viscosity: SAE 0W-16 Outside temperature SAE 0W-16 is the best choice for good fuel economy and good starting in cold weather. If SAE 0W-16 is not available, SAE 0W-20 oil may be used. However, it must be replaced with SAE 0W-16 at the next oil change. Oil viscosity (0W-16 is explained here as an example): The 0W in 0W-16 indicates the characteristic of the oil which allows cold startability. Oils with a lower value before the W allow for easier starting of the engine in cold weather. The 16 in 0W-16 indicates the viscosity characteristic of the oil when the oil is at high temperature. An oil with a higher viscosity (one with a higher value) may be better suited if the vehicle is operated at high speeds, or under extreme load conditions. How to read oil container label: API registered marks is added to some oil containers to help you select the oil you should use. Engine coolant Capacity Cooling system

Capacity (Reference)	1.8 L 4-cylinder (2ZR-FAE) engine Continuously variable transmission:6.1 qt. (5.8 L, 5.1 Imp. qt.) Manual transmission:5.9 qt. (5.6 L, 4.9 Imp. qt.) 2.0 L 4-cylinder (M20A-FKS) engine Continuously variable transmission:6.6 qt. (6.2 L, 5.5 Imp. qt.) Manual transmission:6.2 qt. (5.9 L, 5.2 Imp. qt.)
Coolant type	Use either of the following: “ Toyota Super Long Life Coolant” Similar high-quality ethylene glycol-based non-silicate, non-amine, non-nitrite, and non-borate coolant with long-life hybrid organic acid technology Do not use plain water alone.

Spark plugIgnition system (spark plug)

Make	1.8 L 4-cylinder (2ZR-FAE) engine DENSO FC16HR-Q8 2.0 L 4-cylinder (M20A-FKS) engine DENSO FC20HR-Q8
Gap	0.032 in. (0.8 mm)

Notice: Iridium-tipped spark plugs Use only iridium-tipped spark plugs. Do not adjust the spark plug gap. Electrical system (battery)

Open voltage at 68°F (20°C):	12.3 V or higher(Turn the engine switch off and turn on the high beam headlights for 30 seconds.)
Charging rates Quick charge Slow charge	15 A max. 5 A max.

Fluid Continuously variable transmission Continuously variable transmission

Fluid capacity*	1.8 L 4-cylinder (2ZR-FAE) engine 7.9 qt. (7.5 L, 6.6 Imp. qt.) 2.0 L 4-cylinder (M20A-FKS) engine 9.0 qt. (8.5 L, 7.5 Imp. qt.)
Fluid type	Toyota Genuine CVT Fluid FE

^*The fluid capacity is a reference quantity.If replacement is necessary, contact your Toyota dealer. Notice: Continuously variable transmission fluid type Using continuously variable transmission fluid other than “ Toyota Genuine CVT Fluid FE” may cause deterioration in shift quality, locking up of transmission accompanied by vibration and, ultimately, damage to the vehicle’s transmission. Oil Manual transmission Manual transmission

Gear oil capacity (Reference)	1.8 L 4-cylinder (2ZR-FAE) engine 2.5 qt. (2.4 L, 2.1 Imp. qt.) 2.0 L 4-cylinder (M20A-FKS) engine 1.6 qt. (1.5 L, 1.3 Imp. qt.)
Gear oil type	“ TOYOTA Genuine Manual Transmission Gear Oil LV GL-4 75W” or equivalent

Notice: Manual transmission gear oil type Please be aware that depending on the particular characteristics of the gear oil used or the operating conditions, idle sound, shift feeling and/or fuel efficiency may be different or affected and, in the worst case, damage to the vehicle’s transmission.Toyota recommends to use “ TOYOTA Genuine Manual Transmission Gear Oil LV GL-4 75W” to achieve optimal performance. Your Toyota vehicle is filled with “ TOYOTA Genuine Manual Transmission Gear Oil LV GL-4 75W” at the factory.Use Toyota approved “ TOYOTA Genuine Manual Transmission Gear Oil LV GL-4 75W” or an equivalent oil of matching quality that satisfies the above specifications.Please contact your Toyota dealer for further details. Fluid Clutch Clutch

Pedal free play	0.1 0.6 in. (3 15 mm)
Fluid type	FMVSS No.116 DOT 3 or SAE J1703 FMVSS No.116 DOT 4 or SAE J1704

Fluid Brake Brake Fluid Brakes

Pedal clearance*1	4.1 in. (105 mm) Min.
Pedal free play	0.04 0.24 in. (1 6 mm)
Parking brake lever travel*2, 3	5 8 clicks
Brake pad wear limit	Front 0.06 in. (1.5 mm) Rear Vehicles without a electric parking brake: 0.06 in. (1.5 mm) Vehicles with a electric parking brake: 0.08 in. (2.0 mm)
Parking brake indicator*4	When pulling the parking brake switch for 1 to 2 seconds: comes on When pushing the parking brake switch for 1 to 2 seconds: turns off
Fluid type	FMVSS No.116 DOT 3 or SAE J1703 FMVSS No.116 DOT 4 or SAE J1704

^*1Minimum pedal clearance when depressed with a force of 67.4 lbf (300 N, 30.6 kgf) while the engine is running. ^*2If equipped ^*3Parking brake lever travel when pulled up with a force of 45.0 lbf (200 N, 20.4 kgf) ^*4Make sure to confirm that the brake system warning light (yellow) does not illuminate. (If the brake system warning light illuminates, refer to Brake system warning light.) Steering

Free play

Less than 1.2 in. (30 mm)

Wheels Size Tires Size Tire inflation pressure Maintenance data Spare tire Inflation pressure Tires and wheels Type A

Tire size	195/65R15 91S, T125/70D17 98M
Tire inflation pressure(Recommended cold tire inflation pressure)	Front 38 psi (260 kPa, 2.6 kgf/cm2 or bar) Rear 36 psi (250 kPa, 2.5 kgf/cm2 or bar) Spare 60 psi (420 kPa, 4.2 kgf/cm2 or bar)
Wheel size	15 6 1/2J, 17 4T (compact spare)
Wheel nut torque	76 ft•lbf (103 N•m, 10.5 kgf•m)

Type B

Tire size	205/55R16 91H, T125/70D17 98M
Tire inflation pressure(Recommended cold tire inflation pressure)	Front 35 psi (240 kPa, 2.4 kgf/cm2 or bar) Rear 33 psi (230 kPa, 2.3 kgf/cm2 or bar) Spare 60 psi (420 kPa, 4.2 kgf/cm2 or bar)
Wheel size	16 7J, 17 4T (compact spare)
Wheel nut torque	76 ft•lbf (103 N•m, 10.5 kgf•m)

Type C

Tire size	205/55R16 91V, T125/70D17 98M
Tire inflation pressure(Recommended cold tire inflation pressure)	Front 32 psi (220 kPa, 2.2 kgf/cm2 or bar) Rear 32 psi (220 kPa, 2.2 kgf/cm2 or bar) Spare 60 psi (420 kPa, 4.2 kgf/cm2 or bar)
Wheel size	16 7J, 17 4T (compact spare)
Wheel nut torque	76 ft•lbf (103 N•m, 10.5 kgf•m)

Type D

Tire size	225/40R18 88V, T125/70D17 98M
Tire inflation pressure(Recommended cold tire inflation pressure)	Front 33 psi (230 kPa, 2.3 kgf/cm2 or bar) Rear 30 psi (210 kPa, 2.1 kgf/cm2 or bar) Spare 60 psi (420 kPa, 4.2 kgf/cm2 or bar)
Wheel size	18 8J, 17 4T (compact spare)
Wheel nut torque	76 ft•lbf (103 N•m, 10.5 kgf•m)

Type E

Tire size	195/65R15 91S
Tire inflation pressure(Recommended cold tire inflation pressure)	Front 38 psi (260 kPa, 2.6 kgf/cm2 or bar) Rear 36 psi (250 kPa, 2.5 kgf/cm2 or bar) Spare None
Wheel size	15 6 1/2J
Wheel nut torque	76 ft•lbf (103 N•m, 10.5 kgf•m)

Type F

Tire size	205/55R16 91H
Tire inflation pressure(Recommended cold tire inflation pressure)	Front 35 psi (240 kPa, 2.4 kgf/cm2 or bar) Rear 33 psi (230 kPa, 2.3 kgf/cm2 or bar) Spare None
Wheel size	16 7J
Wheel nut torque	76 ft•lbf (103 N•m, 10.5 kgf•m)

Front side marker lights Wattage Rear side marker lights Wattage Side marker lights Wattage Lights Wattage Interior lights Wattage Personal lights Wattage Vanity lights Wattage Trunk light Wattage License plate lights Wattage Front turn signal lights Wattage Rear turn signal lights Wattage Turn signal lights Wattage Parking lights Wattage Back-up lights Wattage Light bulbs

	Light bulbs	Bulb No.	W	Type
Exterior	Front side marker lights	—	5	A
	Front turn signal /parking lights (vehicles without side turn signal lights)	7444NA	28/8	B
	Rear side marker lights (bulb type)	—	5	A
	Rear turn signal lights	—	21	B
	Back-up lights	—	16	A
Interior	Front interior lights/personal lights	—	5	A
	Vanity lights (if equipped)	—	8	A
	Rear interior light	—	8	C
	Trunk light	—	5	A

A: Wedge base bulbs (clear) B: Wedge base bulbs (amber) C: Double end bulbs